skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Dynamic Accounting of Carbon Uptake in the Built Environment
Transforming building materials from net life-cycle CO2e emitters to carbon sinks is a key pathway towards decarbonizing the industrial sector. Current life-cycle assessments of materials (particularly “low-carbon” materials) often focus on cradle-to-gate emissions, which can exclude emissions and uptake (i.e., fluxes) later in the materials’ life-cycle. Further, conventional CO2e emission characterization disregards the dynamic effects of the timing of emissions and uptake on cumulative radiative forcing from processes like manufacturing, biomass growth, and the decadal carbon storage in long-lived building materials. This work presents a framework to analyze the cradle-to-grave CO2e balance of building materials using a time-dependent global warming potential calculation. We apply this framework in the dynamic accounting of carbon uptake in the built environment (D-CUBE) tool and examine two case studies: concrete and cross-laminated timber (CLT). When accounting for dynamic effects, the long storage time of biogenic carbon in CLT results in reduced warming, while the slow rate of uptake via concrete carbonation does not result in significant reductions in global warming. The D-CUBE tool allows for consistent comparisons across materials and emissions mitigation strategies at varying life-cycle stages and can be adapted to other materials or systems with different lifespans and applications. The flexibility of D-CUBE and the ability to identify CO2e emission hot-spot life-cycle stages will be instrumental in identifying pathways to achieving net-carbon-sequestering building materials.  more » « less
Award ID(s):
2143981
PAR ID:
10608147
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Publisher / Repository:
ACS Publications
Date Published:
Journal Name:
Environmental Science & Technology
Volume:
59
Issue:
13
ISSN:
0013-936X
Page Range / eLocation ID:
6556 to 6566
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, World Conference on Timber Engineering (WCTE 2023))
    This paper describes the lateral force resisting system (LFRS) design in a full-scale six-story shake-table test building and presents a comparative cradle-to-grave life-cycle assessment of alternative LFRSs. The test building features the reuse of material from a ten-story shake-table structure comprised of engineered mass timber (MT) products. These include MT floors (cross-, glue-, nail-, and dowel-laminated timber [CLT], [GLT], [NLT], [DLT]); MT posttensioned rocking walls (CLT and mass ply panels [MPP]); and a gravity system consisting of laminated-veneer lumber (LVL) beams and columns. Shake-table testing will benchmark innovative, low-damage design solutions for the LFRSs. To supplement this test, the environmental impact of a MT LFRS is determined relative to design alternatives that use conventional materials. The Athena Impact Estimator for Buildings was used to perform a comparative, cradle-to-grave life-cycle assessment (LCA) of the prototype MT LFRS with respect to an alternative, functionally equivalent reinforced concrete (RC) shear wall design. The LCA results showed reduced environmental impacts across some impact metrics, with a significant reduction in Global Warming Potential for the MT LFRS when accounting for biogenic carbon. 
    more » « less
  2. ; ; (, Infrastructures)
    Pervious concrete, which has recently found new applications in buildings, is both energy- and carbon-intensive to manufacture. However, similar to normal concrete, some of the initial CO2 emissions associated with pervious concrete can be sequestered through a process known as carbonation. In this work, the theoretical formulation and application of a mathematical model for estimating the carbon dioxide (CO2) sequestration potential of pervious concrete is presented. Using principles of cement and carbonation chemistry, the model related mixture proportions of pervious concretes to their theoretical in situ CO2 sequestration potential. The model was subsequently employed in a screening life cycle assessment (LCA) to quantify the percentage of recoverable CO2 emissions—namely, the ratio of in situ sequesterable CO2 to initial cradle-to-gate CO2 emissions—for common pervious concrete mixtures. Results suggest that natural carbonation can recover up to 12% of initial CO2 emissions and that CO2 sequestration potential is maximized for pervious concrete mixtures with (i) lower water-to-cement ratios, (ii) higher compressive strengths, (iii) lower porosities, and (iv) lower hydraulic conductivities. However, LCA results elucidate that mixtures with maximum CO2 sequestration potential (i.e., mixtures with high cement contents and CO2 recoverability) emit more CO2 from a net-emissions perspective, despite their enhanced in situ CO2 sequestration potential. 
    more » « less
  3. ; ; ; ; (, International Journal of Greenhouse Gas Control)
    This study reports the cradle-to-wheel life cycle greenhouse gas (GHG) emissions resulting from enhanced oil recovery (EOR) using CO2 sourced from direct air capture (DAC). A Monte Carlo simulation model representing variability in technology, location, and supply chain is used to model the possible range of carbon intensities (CI) of oil produced through DAC-EOR. Crude oil produced through DAC-EOR is expected to have a CI of 449 tCO2/ mbbl. With 95% confidence, the CI is between 345 tCO2/mbbl to 553 tCO2/mbbl. Producing net-zero GHG emission oil through DAC-EOR is thus highly improbable. An example case of DAC-EOR in the U.S. Permian Basin shows that only in the unlikely instance of the most storage efficient sites using 100% renewable energy does DAC-EOR result in “carbon-negative” oil production. 
    more » « less
  4. ; ; (, Soil Science Society of America Journal)
    Agriculture is being called upon to increase carbon (C) storage in soils to reduce greenhouse gas (GHG) accumulation in the atmosphere. Cropping systems research can be used to support GHG mitigation efforts, but we must quantify land management impacts using appropriate assumptions and unambiguous methods. Soil C sequestration is considered temporary because it can be re-emitted as carbon dioxide (CO2) if the effecting practice is not maintained and/or the soil–plant system is disturbed, for example, as the result of changing climate. Because of this, the climate benefit of soil C sequestration depends on the time that C is held out of the atmosphere. When assessing the net GHG impact of management practices, soil C storage is often aggregated with non-CO2 (N2O and CH4) emissions after converting all components to CO2 equivalents (CO2e) and assuming a given time horizon (TH), in what is known as stock change accounting. However, such analyses do not consider potential re-emission of soil C or apply consistent assumptions about time horizons. Here, we demonstrate that tonne-year accounting provides a more conservative estimate of the emissions offsetting potential of soil C storage compared to stock change accounting. Tonne-year accounting can be used to reconcile differences in the context and timeframes of soil C sequestration and non-CO2 GHG emissions. The approach can be applied post hoc to commonly observed cropping systems data to estimate GHG emissions offsets associated with agricultural land management over given THs and with more clearly defined assumptions. 
    more » « less
  5. ; (, ACS Sustainable Chemistry & Engineering)
    The urgency of action toward mitigating climate change and reducing material leakage into the environment is inspiring a plethora of innovative technologies, supply chains, and policy actions. These are targeted toward reducing greenhouse gas emissions, natural resource uptake, and decoupling technological systems from fossil-based linear economies using circularity strategies. Industrial and governmental stakeholders are keen to rank these proposed eco-innovations and emerging alternatives based on their scope of contributing to a sustainable and circular economy to meet global warming curtailment and pollution mitigation targets. We describe a novel methodological framework that relies on a multiobjective optimization of cradle-to-cradle life-cycle pathways to screen from a large database of conceptual eco-innovations and rank them based on their potential for establishing a Sustainable Circular Economy (SCE). This methodology is implemented for a motivating case study to evaluate numerous packaging eco-innovations based on their improvement potential and readiness for adoption within the grocery bags value-chain network. It is demonstrated that a preliminary screening step identifies the 10 most promising eco-innovations from a large superset of alternatives, which if developed and adopted can help transition the value chain to a future scenario with net-zero emissions and adherence to the recycled and renewable-content targets set by the United States Plastics pact but at a higher cost. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email