An official website of the United States government
Abstract Ctenophores swim using flexible rows of appendages called ctenes that form the metachronal paddling. To generate propulsion, each appendage operates a power stroke that strokes backward, followed by a recovery stroke that allows the appendage to readjust its position. Notably, strokes of most metachronal swimmers are asymmetric, with faster power strokes while slower recovery strokes. Previously, the material properties are assumed as isotropic. So, the faster power stoke will lead to more pronounce deformation and the slower recovery stroke will lead to less deformation. However, this contradicts with the observations that power-stroking ctenes have the least deformation and recover deforms more, indicating an anisotropic material behavior. Such anisotropic material is hard to be manufactured, but the anisotropic behavior may be achieved by making the initial structural shape curved. The pre-curved ctene, that bending towards downstream, will be straighten in power stoke while easy to bend during recovery stroke. Our study aims to demonstrate the feasibility of using pre-curved shapes to achieve anisotropic material properties during metachronal swimming. Treating it as fluid-structure interaction (FSI) problem, we integrate our in-house computational fluid dynamics (CFD) solver with a finite element method (FEM) solver, utilizing strong coupling methods for convergence. By comparing the performance of pre-curved ctenes with straight ones, which represent isotropic material properties, we found that the curved ctenes exhibited 26.05% to 65.69% higher cycle-averaged thrust compared to the straight one as stiffness is lower. However, as stiffness increased, the pre-curved ctenes produced 3.92% to 30.58% less thrust than the straight ones. Similar trends were observed in propulsive efficiency, with the pre-curved ctenes demonstrating 46.97% better efficiency at the lowest stiffness but dropping to 34.02% less efficient as stiffness rise. Thus, while the pre-curved initial shape led to better performance at lower stiffness, exceeding a certain stiffness threshold resulted in worse performance compared to straight ctenes. The thrust enhancement from pre-curve shape is due to the drag reduction during recovery stroke, where the curved shape mitigate part of force to point more downward.
more »
« less
A Computational Analysis of Fluid-Structure Interaction in Metachronal Propulsion
Abstract Ctenophores employ flexible rows of appendages called ctenes that form the metachronal beating pattern. A complete cycle of such paddling consists of a power stroke that strokes backward to produce propulsion and a recovery stroke that allows the appendage to recover its initial position. Effective locomotion in these creatures relies on maximizing propulsion during the power stroke while minimizing drag in the recovery stroke. Unlike rigid oars, the ctenes are flexible during both the power stroke and the recovery stroke, and notably, their strokes are asymmetric, with faster movement during the power stroke. As previous research assumed uniform material properties. This assumption will eventually make the ctene deform more intensively in the power stroke than the recovery stroke due to the asymmetrical hydrodynamic forces. However, observations contradict these assumptions. One explanation posits that ctenes stiffen during the power stroke, enhancing their propulsive force, and become more flexible in the recovery stroke, reducing drag by minimizing the water-countering area. This study focusses on the influence of asymmetric stiffness on their propulsion mechanism. Inspired by nature, we conducted three-dimensional fluid-structure interaction (FSI) using an in-house immersed-boundary-method-based flow solver integrated with a nonlinear finite-element solid-mechanics solver. This integrated solver uses a two-way coupling that ensures a higher accuracy regarding the complexity due to the involvement of the multiple ctenes in a ctene row. The preliminary results show that the anisotropic stiffness of the ctene have better accuracy of deformation as compared to the deformation recorded by the high-speed camera. The asymmetric properties of the ctene material allow both the spatial and temporal asymmetry of the ctene beating pattern. Our investigation suggests that while symmetrical beating can only generate negative net thrust, a slightly asymmetrical beating can make the thrust positive. We find that power stroke period that cost 30% whole period can generates the highest thrust. As multiple ctenes involves, the interaction among ctenes can amplified the effects of the asymmetrical beating, so that the thrust generation is enhanced by 9 to 13 times because of it.
more »
« less
- PAR ID:
- 10613164
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Ctenophores coordinate large macrociliary structures called ctenes to propel themselves through the water. The morphology and kinematics of the ctenes mediate swimming performance. We investigated morphological and kinematic factors affecting swimming performance in free‐swimming ctenophores (Pleurobrachia bachei) using high speed videography. Our morphological results showed that the relationship between body size and ctene morphology and arrangement inP. bacheiwere well described using linear (i.e., isometric) relationships, which suggests functional limitations of ctenes that vary among individuals of different sizes. Our kinematic results showed that isometric constraints on swimming performance can potentially be overcome by alterations in kinematics: (a) swimming speed inP. bacheiincreased with ctene beat frequency over a range of body lengths, and (b) the separation of ctenes into clumps of cilia allowed the ctene to increase in width during the effective stroke and decrease in width during recovery. Separation increases the surface area of the ctene during the effective stroke, likely increasing the thrust produced. The finding that ctenes are not monoliths and instead are separated into clumps of cilia has not been previously described, and we subsequently observed this trait in three other ctenophore species:Euplokamis dunlapae,Bolinopsis infundibulum,andBeroe mitrata. Flexibility in function may be a necessary corollary to isometric development of the ctenes as propulsive structures.more » « less
-
Metachronal rowing is a biological propulsion mechanism employed by many swimming invertebrates (e.g. copepods, ctenophores, krill and shrimp). Animals that swim using this mechanism feature rows of appendages that oscillate in a coordinated wave. In this study, we used observations of a swimming ctenophore (comb jelly) to examine the hydrodynamic performance and vortex dynamics associated with metachronal rowing. We first reconstructed the beating kinematics of ctenophore appendages based on a high-speed video of a metachronally coordinated row. Following the reconstruction, two numerical models were developed and simulated using an in-house immersed-boundary-method-based computational fluid dynamics solver. The two models included the original geometry (16 appendages in a row) and a sparse geometry (8 appendages, formed by removing every other appendage along the row). We found that appendage tip vortex interactions contribute to hydrodynamic performance via a vortex-weakening mechanism. Through this mechanism, appendage tip vortices are significantly weakened during the drag-producing recovery stroke. As a result, the swimming ctenophore produces less overall drag, and its thrust-to-power ratio is significantly improved (up to 55.0 % compared with the sparse model). Our parametric study indicated that such a propulsion enhancement mechanism is less effective at higher Reynolds numbers. Simulations were also used to investigate the effects of substrate curvature on the unsteady hydrodynamics. Our results illustrated that, compared with a flat substrate, arranging appendages on a curved substrate can boost the overall thrust generation by up to 29.5 %. These findings provide new insights into the fluid dynamic principles of propulsion enhancement underlying metachronal rowing.more » « less
-
Abstract Metachronal motion is a unique swimming strategy widely adopted by many small animals on the scale of microns up to several centimeters (e.g., ctenophores, copepods, krill, and shrimp). During propulsion, each evenly spaced appendage performs a propulsive stroke sequentially with a constant phaselag from its neighbor, forming a metachronal wave. To produce net thrust in the low-to-intermediate Reynolds number regime, where viscous forces are dominant, the beat cycle of a metachronal appendage must present significant spatial asymmetry between the power and recovery stroke. As the Reynolds number increases, the beat cycle is observed to change from high spatial asymmetry to lower spatial asymmetry. However, it is still unclear how the magnitude of spatial asymmetry can modify the shear layers near the tip of appendages and thus affect its associated hydrodynamic performance. In this study, ctenophores are used to investigate the hydrodynamics of multiple appendages performing a metachronal wave. Ctenophores swim using paddle-like ciliary structures (i.e., ctenes), which beat metachronally in rows circumscribing an ovoid body. Based on high-speed video recordings, we reconstruct the metachronal wave of ctenes for both a lower spatial asymmetry case and a higher spatial asymmetry case. An in-house immersed-boundary-method-based computational fluid dynamics solver is used to simulate the flow field and associated hydrodynamic performance. Our simulation results aim to provide fundamental fluid dynamic principles for guiding the design of bio-inspired miniaturized flexible robots swimming in the low-to-intermediate Reynolds number regime.more » « less
-
Abstract Many organisms use flexible appendages for locomotion, feeding, and other functional behaviors. The efficacy of these behaviors is determined in large part by the fluid dynamics of the appendage interacting with its environment. For oscillating appendages at low Reynolds numbers, viscosity dominates over inertia, and appendage motion must be spatially asymmetric to generate net flow. At high Reynolds numbers, viscous forces are negligible and appendage motion is often also temporally asymmetric, with a fast power stroke and a slow recovery stroke; such temporal asymmetry does not affect the produced flow at low Reynolds numbers. At intermediate Reynolds numbers, both viscous and inertial forces play non-trivial roles—correspondingly, both spatial and temporal asymmetry can strongly affect overall propulsion. Here we perform experiments on three robotic paddles with different material flexibilities and geometries, allowing us to explore the effects of motion asymmetry (both spatial and temporal) on force production. We show how a flexible paddle’s time-varying shape throughout the beat cycle can reorient the direction of the produced force, generating both thrust and lift. We also evaluate the propulsive performance of the paddle by introducing a new quantity, which we term ‘integrated efficiency’. This new definition of propulsive efficiency can be used to directly evaluate an appendage’s performance independently from full-body swimming dynamics. Use of the integrated efficiency allows for accurate performance assessment, generalization, and comparison of oscillating appendages in both robotic devices and behaving organisms. Finally, we show that a curved flexible paddle generates thrust more efficiently than a straight paddle, and produces spatially asymmetric motion—thereby improving performance—without the need for complex actuation and controls, opening new avenues for bioinspired technology development.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/FEDSM2024-130661
