Photonic integrated circuits (PICs) with rapid prototyping and reprogramming capabilities promise revolutionary impacts on a plethora of photonic technologies. We report direct-write and rewritable photonic circuits on a low-loss phase-change material (PCM) thin film. Complete end-to-end PICs are directly laser-written in one step without additional fabrication processes, and any part of the circuit can be erased and rewritten, facilitating rapid design modification. We demonstrate the versatility of this technique for diverse applications, including an optical interconnect fabric for reconfigurable networking, a photonic crossbar array for optical computing, and a tunable optical filter for optical signal processing. By combining the programmability of the direct laser writing technique with PCM, our technique unlocks opportunities for programmable photonic networking, computing, and signal processing. Moreover, the rewritable photonic circuits enable rapid prototyping and testing in a convenient and cost-efficient manner, eliminate the need for nanofabrication facilities, and thus promote the proliferation of photonics research and education to a broader community.
more »
« less
Automated assembly of hybrid-integrated, chip-scale laser systems
Hybrid photonic integration provides a platform to design and implement novel functionalities unavailable to active or passive material systems alone. We present an automated alignment and assembly process for hybrid-integrated laser systems, comprising silicon nitride (Si3N4) photonic integrated circuits (PICs) edge-coupled to gallium arsenide (GaAs) gain chips (GCs). We design and optimize spot size converters (SSCs) to increase the alignment tolerances between the PICs and GCs. Our automated assembly process has achieved experimental coupling losses of 2.7 dB between the PICs and GCs, closely matching the simulated values. Packaged hybrid lasers, when coupled to a lensed fiber, exhibit slope efficiencies of ∼ 97 mW/A. These results show the feasibility of scaling the production and widespread application of these hybrid laser systems by automating their assembly, which should drive down packaging costs and accelerate research.
more »
« less
- Award ID(s):
- 2137776
- PAR ID:
- 10613564
- Publisher / Repository:
- Optica
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 33
- Issue:
- 9
- ISSN:
- 1094-4087
- Page Range / eLocation ID:
- 19257
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
A fully-functional photonic integrated circuit (PIC) platform with supporting active and passive components in the extended short- and mid-wave infrared spectral regime is of significant research interest for next-generation optical systems. Here we design offset quantum well-based photonic integrated circuits which primarily consist of four section-based widely tunable single-mode lasers emitting at 2560 nm. The platform requires the selective removal of InGaAsSb multi-quantum wells located above a GaSb-based optical waveguide layer and then subsequent single blanket GaSb regrowth. Encouraging preliminary experimental results on regrowth are also reported to confirm the feasibility of the proposed PICs. The simulation result for the tunable laser design shows that a tuning range as wide as ~120 nm is possible. The quasi-theoretical work performed here is an initial step towards demonstrating complex non-telecommunication PICs which could offer a comprehensive range of photonic functionalities.more » « less
-
Abstract Programmable photonic integrated circuits (PICs) consisting of reconfigurable on-chip optical components have been creating new paradigms in various applications, such as integrated spectroscopy, multi-purpose microwave photonics, and optical information processing. Among many reconfiguration mechanisms, non-volatile chalcogenide phase-change materials (PCMs) exhibit a promising approach to the future very-large-scale programmable PICs, thanks to their zero static power and large optical index modulation, leading to extremely low energy consumption and ultra-compact footprints. However, the scalability of the current PCM-based programmable PICs is still limited since they are not directly off-the-shelf in commercial photonic foundries now. Here, we demonstrate a scalable platform harnessing the mature and reliable 300 mm silicon photonic fab, assisted by an in-house wide-bandgap PCM (Sb2S3) integration process. We show various non-volatile programmable devices, including micro-ring resonators, Mach-Zehnder interferometers and asymmetric directional couplers, with low loss (~0.0044 dB/µm), large phase shift (~0.012 π/µm) and high endurance (>5000 switching events with little performance degradation). Moreover, we showcase this platform’s capability of handling relatively complex structures such as multiple PIN diode heaters in devices, each independently controlling an Sb2S3segment. By reliably setting the Sb2S3segments to fully amorphous or crystalline state, we achieved deterministic multilevel operation. An asymmetric directional coupler with two unequal-length Sb2S3segments showed the capability of four-level switching, beyond cross-and-bar binary states. We further showed unbalanced Mach-Zehnder interferometers with equal-length and unequal-length Sb2S3segments, exhibiting reversible switching and a maximum of 5 ($$N+1,N=4$$ ) and 8 ($${2}^{N},N=3$$ ) equally spaced operation levels, respectively. This work lays the foundation for future programmable very-large-scale PICs with deterministic programmability.more » « less
-
Increasing the space-bandwidth product of spatial light modulators incurs severe issues in terms of power consumption, mutual crosstalk, and control signal wiring. In this opinion article, we propose a novel system to overcome these challenges by marrying energy-efficient modulators in photonic integrated circuits (PICs) and a meta-optical beam aggregator. This hybrid approach can significantly improve the space-bandwidth product, theoretically up to 1013Hz · pixel, which is several orders of magnitude higher than the state-of-the-art.more » « less
-
Abstract Frequency modulated continuous wave laser ranging (FMCW LiDAR) enables distance mapping with simultaneous position and velocity information, is immune to stray light, can achieve long range, operate in the eye-safe region of 1550 nm and achieve high sensitivity. Despite its advantages, it is compounded by the simultaneous requirement of both narrow linewidth low noise lasers that can be precisely chirped. While integrated silicon-based lasers, compatible with wafer scale manufacturing in large volumes at low cost, have experienced major advances and are now employed on a commercial scale in data centers, and impressive progress has led to integrated lasers with (ultra) narrow sub-100 Hz-level intrinsic linewidth based on optical feedback from photonic circuits, these lasers presently lack fast nonthermal tuning, i.e. frequency agility as required for coherent ranging. Here, we demonstrate a hybrid photonic integrated laser that exhibits very narrow intrinsic linewidth of 25 Hz while offering linear, hysteresis-free, and mode-hop-free-tuning beyond 1 GHz with up to megahertz actuation bandwidth constituting 1.6 × 1015Hz/s tuning speed. Our approach uses foundry-based technologies - ultralow-loss (1 dB/m) Si3N4photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase-noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise at mid-range offsets. By utilizing difference-drive and apodization of the photonic chip to suppress mechanical vibrations of the chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm. Our results constitute a photonic integrated laser system for scenarios where high compactness, fast frequency actuation, and high spectral purity are required.more » « less
An official website of the United States government

