Abstract Wildland fire–atmosphere interaction generates complex turbulence patterns, organized across multiple scales, which inform fire-spread behaviour, firebrand transport, and smoke dispersion. Here, we utilize wavelet-based techniques to explore the characteristic temporal scales associated with coherent patterns in the measured temperature and the turbulent fluxes during a prescribed wind-driven (heading) surface fire beneath a forest canopy. We use temperature and velocity measurements from tower-mounted sonic anemometers at multiple heights. Patterns in the wavelet-based energy density of the measured temperature plotted on a time–frequency plane indicate the presence of fire-modulated ramp–cliff structures in the low-to-mid-frequency band (0.01–0.33 Hz), with mean ramp durations approximately 20% shorter and ramp slopes that are an order of magnitude higher compared to no-fire conditions. We then investigate heat- and momentum-flux events near the canopy top through a cross-wavelet coherence analysis. Briefly before the fire-front arrives at the tower base, momentum-flux events are relatively suppressed and turbulent fluxes are chiefly thermally-driven near the canopy top, owing to the tilting of the flame in the direction of the wind. Fire-induced heat-flux events comprising warm updrafts and cool downdrafts are coherent down to periods of a second, whereas ambient heat-flux events operate mainly at higher periods (above 17 s). Later, when the strongest temperature fluctuations are recorded near the surface, fire-induced heat-flux events occur intermittently at shorter scales and cool sweeps start being seen for periods ranging from 8 to 35 s near the canopy top, suggesting a diminishing influence of the flame and increasing background atmospheric variability thereat. The improved understanding of the characteristic time scales associated with fire-induced turbulence features, as the fire-front evolves, will help develop more reliable fire behaviour and scalar transport models.
more »
« less
Flux Convergence and Divergence Linked to Asymmetric Transport by Large Turbulent Eddies in the Unstable Atmospheric Surface Layer
Abstract It is well‐established that large eddies significantly influence the turbulent transport of heat and scalars in the atmospheric surface layer. However, the mechanistic understanding of how large eddies originating from both the ground (updrafts) and aloft (downdrafts) regulate flux convergence (FC) and divergence (FD) remains relatively unexplored. Based on turbulence data measured at 12 levels, spanning from 1.2 to 60.5 m above the ground, we observe a notable increase in the variability of sensible heat flux magnitudes with height. Our results show that FC and FD of sensible heat are primarily linked to variations in the respective transport efficiencies () at different heights. Using the cross‐wavelet transform, we find that in FC cases, the regions with high wavelet coherence expand with height, resulting in higher at higher levels compared to low ones. Conversely, in FD cases, the regions with high wavelet coherence decrease with height, leading to lower at higher levels. Large eddies with length scales of approximately 120–500 m have a significant impact on amplifying or attenuating at higher levels compared to lower levels. Using conditional sampling to extract the updrafts and downdrafts of large eddies, distinct patterns are observed in the characteristics of updrafts and downdrafts between FC and FD groups especially in their flux contribution and transport efficiencies. This work emphasizes the significant contribution of asymmetric turbulent transport by updrafts and downdrafts to the discrepancy between the observed turbulent fluxes and those predicted by the Monin‐Obukhov similarity theory.
more »
« less
- Award ID(s):
- 2325687
- PAR ID:
- 10618312
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Atmospheres
- Volume:
- 130
- Issue:
- 1
- ISSN:
- 2169-897X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Kelvin-Helmholtz (KH) waves are a frequent source of turbulence in stratiform precipitation systems over mountainous terrain. KH waves introduce large eddies into otherwise laminar flow, with updrafts and downdrafts generating small-scale turbulence. When they occur in-cloud, such dynamics influence microphysical processes that impact precipitation growth and fallout. Part I of this paper used dual-Doppler, 2D wind and reflectivity measurements from an airborne cloud radar to demonstrate the occurrence of KH waves in stratiform orographic precipitation systems and identified four mechanisms for triggering KH waves. In Part II, we use similar observations to explore the effects of KH wave updrafts and turbulence on cloud microphysics. Measurements within KH wave updrafts reveal the production of liquid water in otherwise ice-dominated clouds, which can contribute to snow generation or enhancement via depositional and accretional growth. Fallstreaks beneath KH waves contain higher ice water content, composed of larger and more numerous ice particles, suggesting that KH waves and associated turbulence may also increase ice nucleation. A Large-Eddy Simulation (LES), designed to model the microphysical response to the KH wave eddies in mixed phase cloud, shows that depositional and accretional growth can be enhanced in KH waves, resulting in more precipitation when compared to a baseline simulation. While sublimation and evaporation occur in KH downdrafts, persistent supersaturation with respect to ice allows for net increase in ice mass. These modeling results and observations suggest that KH waves embedded in mixed-phase stratiform clouds may increase precipitation, although the quantitative impact remains uncertain.more » « less
-
Abstract How convective boundary‐layer (CBL) processes modify fluxes of sensible (SH) and latent (LH) heat and CO2(Fc) in the atmospheric surface layer (ASL) remains a recalcitrant problem. Here, large eddy simulations for the CBL show that whileSHin the ASL decreases linearly with height regardless of soil moisture conditions,LHandFcdecrease linearly with height over wet soils but increase with height over dry soils. This varying flux divergence/convergence is regulated by changes in asymmetric flux transport between top‐down and bottom‐up processes. Such flux divergence and convergence indicate that turbulent fluxes measured in the ASL underestimate and overestimate the “true” surface interfacial fluxes, respectively. While the non‐closure of the surface energy balance persists across all soil moisture states, it improves over drier soils due to overestimatedLH. The non‐closure does not imply thatFcis always underestimated;Fccan be overestimated over dry soils despite the non‐closure issue.more » « less
-
Jet impingement can be particularly effective for removing high heat fluxes from local hotspots. Two-phase jet impingement cooling combines the advantages of both the nucleate boiling heat transfer with the single-phase sensible cooling. This study investigates two-phase confined jet impingement cooling of local, laser-generated hotspots in a 100 nm thick Hafnium (Hf) thin film on glass. The jet/nozzle diameter is ∼1.2 mm and the normal distance between the nozzle outlet and the heated surface is ∼3.2 mm. The jet coolants studied are FC 72, Novec 7200, and Ethanol with jet nozzle outlet Reynolds numbers ranging from 250 to 5000. The hotspot area is ∼0.06 mm2 and the applied hotspot-to-jet heat fluxes range from 20 W/cm2 to 350 W/cm2. This heat flux range facilitates studies of both the single-phase and two-phase heat transport mechanisms for heat fluxes up to critical heat flux (CHF). The temporal evolution of the temperature distribution of the laser-heated surface is measured using infrared (IR) thermometry. This study focuses on the stagnation point heat transfer - i.e., the jet potential core is co-aligned with the hotspot center. For ethanol, the CHF is ∼315 W/cm2 at Re ∼ 1338 with a corresponding heat transfer coefficient of h ∼ 102 kW/m2·K. For FC 72, the CHF is ∼94 W/cm2 at Re ∼ 5000 with a corresponding h ∼ 56 kW/m2·K. And for Novec 7200, the CHF is ∼108 W/cm2 at Re ∼ 4600 with a corresponding h ∼ 50 kW/m2·K.more » « less
-
Abstract This paper shows how clusters of radiation-stabilized water droplets levitated in an upward flow of air and water vapor above a heated water surface can be modeled using Spalding's self-similarity theory of heat and mass transfer and Stefan flow. The model describes equilibrium droplet states, including stability conditions, as well as nonequilibrium (quasi-steady) transient evolution. Equilibrium states are shown to exist when Stefan-flow supersaturation, which has a quadratic-like variation with height above the water surface, and radiation-stabilized equilibrium supersaturation, which is nearly constant with height, are equal. The latter can be predicted by a fundamentally derived function of absorbed radiant flux (linear), droplet radius (linear if opaque), continuum thermal conductivity, and thermodynamic properties. In fact, all of the experimentally observed droplet behavior can be predicted using simple analytical results based on quasi-steady droplet energy and continuum transport. Unsteady droplet energy, Knudsen-layer transport, numerical solutions, and curve-fitting of numerical computations, as used previously in modeling this behavior, are not necessary. An interesting reversal of the usual effect of mass transfer on droplet drag in low-Re flow when levitated droplets are irradiated asymmetrically by significant infrared radiation is also postulated, which relates to the relative importance of normal (pressure) and tangential (shear stress) drag. This theory of radiation-augmented droplet evaporation, condensation, and relative motion in a moving gas has application to conditions in clouds, wherein droplets can experience either net radiative heating or cooling and fluctuating updrafts or downdrafts.more » « less
An official website of the United States government

