An official website of the United States government
Abstract Wearable piezoresistive sensors are being developed as electronic skins (E‐skin) for broad applications in human physiological monitoring and soft robotics. Tactile sensors with sufficient sensitivities, durability, and large dynamic ranges are required to replicate this critical component of the somatosensory system. Multiple micro/nanostructures, materials, and sensing modalities have been reported to address this need. However, a trade‐off arises between device performance and device complexity. Inspired by the microstructure of the spinosum at the dermo epidermal junction in skin, a low‐cost, scalable, and high‐performance piezoresistive sensor is developed with high sensitivity (0.144 kPa‐1), extensive sensing range ( 0.1–15 kPa), fast response time (less than 150 ms), and excellent long‐term stability (over 1000 cycles). Furthermore, the piezoresistive functionality of the device is realized via a flexible transparent electrode (FTE) using a highly stable reduced graphene oxide self‐wrapped copper nanowire network. The developed nanowire‐based spinosum microstructured FTEs are amenable to wearable electronics applications.
more »
« less
This content will become publicly available on November 15, 2025
Near-infrared spectroscopy–enabled electromechanical systems for fast mapping of biomechanics and subcutaneous diagnosis
Fast and accurate assessment of skin mechanics holds great promise in diagnosing various epidermal diseases, yet substantial challenges remain in developing simple and wearable strategies for continuous monitoring. Here, we present a design concept, named active near-infrared spectroscopy patch (ANIRP) for continuously mapping skin mechanics. ANIRP addresses these challenges by integrating near-infrared (NIR) sensing with mechanical actuators, enabling rapid measurement (<1 s) of Young’s modulus, high spatial sensing density (~1 cm2), and high spatial sensitivity (<1 mm). Unlike conventional electromechanical sensors, NIR sensors precisely capture vibrational frequencies propagated from the actuators without needing ultraclose contact, enhancing wearing comfort. Demonstrated examples include ANIRPs for comprehensively moduli mapping of artificial tissues with varied mechanical properties emulating tumorous fibrosis. On-body validation of the ANIRP across skin locations confirms its practical utility for clinical monitoring of epidermal mechanics, promising considerable advancements in real-time, noninvasive skin diagnostics and continuous health monitoring.
more »
« less
- PAR ID:
- 10618727
- Publisher / Repository:
- AAAS
- Date Published:
- Journal Name:
- Science Advances
- Volume:
- 10
- Issue:
- 46
- ISSN:
- 2375-2548
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The human body exhibits complex, spatially distributed chemo-electro-mechanical processes that must be properly captured for emerging applications in virtual/augmented reality, precision health, activity monitoring, bionics, and more. A key factor in enabling such applications involves the seamless integration of multipurpose wearable sensors across the human body in different environments, spanning from indoor settings to outdoor landscapes. Here, we report a versatile epidermal body area network ecosystem that enables wireless power and data transmission to and from battery-free wearable sensors with continuous functionality from dry to underwater settings. This is achieved through an artificial near field propagation across the chain of biocompatible, magneto-inductive metamaterials in the form of stretchable waterborne skin patches—these are fully compatible with pre-existing consumer electronics. Our approach offers uninterrupted, self-powered communication for human status monitoring in harsh environments where traditional wireless solutions (such as Bluetooth, Wi-Fi or cellular) are unable to communicate reliably.more » « less
-
Human skin emits a continuous flux of volatile compounds reflecting various metabolic processes in the body, microbial activity, and environmental factors. Harnessing this emission for diagnostics is of great interest given the noninvasive, passive, and accessible nature of the emission, and there is much research underway to understand the value of this skin-emitted volatile organic compound (VOC) matrix. In parallel to this, wearable skin VOC sensors are emerging and garnering attention due to their potential to provide noninvasive, real-time information for monitoring human health, overcoming many of the design challenges related to biofluid monitoring via wearables. The projected opportunities for skin VOCs are fueling innovations in wearable VOC monitoring. This review discusses the most recent developments, from fully integrated wearable skin VOC sensors that exploit existing semiconductor technology to the design and preparation of advanced new sensing materials and devices to deliver new modalities for wearable skin VOC sensors. We articulate the challenges, limitations, and opportunities for technological advances to provide a perspective on promising directions for future developments.more » « less
-
Sensing and actuation are intricately connected in soft robotics, where contact may change actuator mechanics and robot behavior. To improve soft robotic control and performance, proprioception and contact sensors are needed to report robot state without altering actuation mechanics or introducing bulky, rigid components. For bioinspired McKibben-style fluidic actuators, prior work in sensing has focused on sensing the strain of the actuator by embedding sensors in the actuator bladder during fabrication, or by adhering sensors to the actuator surface after fabrication. However, material property mismatches between sensors and actuators can impede actuator performance, and many soft sensors available for use with fluidic actuators rely on costly or labor-intensive fabrication methods. Here, we demonstrate a low-cost and easy-to manufacture-tubular liquid metal strain sensor for use with soft actuators that can be used to detect actuator strain and contact between the actuator and external objects. The sensor is flexible, can be fabricated with commercial-off-the-shelf components, and can be easily integrated with existing soft actuators to supplement sensing, regardless of actuator shape or size. Furthermore, the soft tubular strain sensor exhibits low hysteresis and high sensitivity. The approach presented in this work provides a low-cost, soft sensing solution for broad application in soft robotics.more » « less
-
Single-wall carbon nanotubes (SWNT) have a strong and stable near-infrared (nIR) signal and can interact with target analytes selectively, even at the single molecule level, to alter fluorescence intensity and/or emission peak wavelength. SWNT have been employed as nIR optical sensors for detecting a variety of analytes. However, high cost, long fabrication time, and poor fluorescence yield limit the current methods for immobilizing SWNT sensors on solid substrates. Recently, our group reported a protocol for SWNT immobilization resulting in high fluorescence yield, signal longevity, fluorescence distribution, and quick sensing response time. However, it takes 5 days to fabricate these sensor arrays. We have improved our previously reported protocol to immobilize SWNT sensors with a method that takes only 2 days, results in a platform with similar surface morphology, and has a higher fluorescence intensity than the previous platforms without sacrificing the sensing capabilities.more » « less
