An official website of the United States government
Abstract Weathering processes weaken and break apart rock, freeing nutrients and enhancing permeability through the subsurface. To better understand these processes, it is useful to constrain physical properties of materials derived from weathering within the critical zone. Foliated rocks exhibit permeability, strength and seismic anisotropy–the former two bear hydrological and geomorphological consequences while the latter is geophysically quantifiable. Each of these types of anisotropy are related to rock fabric (fractures and foliation); thus, characterizing weathering‐dependent changes in rock fabric with depth may have a range of implications (e.g., landslide susceptibility, groundwater modeling, and landscape evolution). To better understand how weathering effects rock fabric, we quantify seismic anisotropy in saprolite and weathered bedrock within two catchments underlain by the Precambrian Loch Raven schist, located in Oregon Ridge Park, MD. Using circular geophone arrays and perpendicular seismic refraction profiles, anisotropy versus depth functions are created for material 0–25 m below ground surface (bgs). We find that anisotropy is relatively low (0%–15%) in the deepest material sampled (12–25 m bgs) but becomes more pronounced (29%–33%) at depths corresponding with saprolite and highly weathered bedrock (5–12 m bgs). At shallow soil depths (0–5 m bgs), material is seismically isotropic, indicating that mixing processes have destroyed parent fabric. Therefore, in situ weathering and anisotropy appear to be correlated, suggesting that in‐place weathering amplifies the intrinsic anisotropy of bedrock.
more »
« less
On the role of inherited rock fabric in critical zone porosity development: Insights from seismic anisotropy measurements using surface waves
Abstract Within Earth's critical zone, weathering processes influence landscape evolution and hillslope hydrology by creating porosity in bedrock, transforming it into saprolite and eventually soil. In situ weathering processes drive much of this transformation while preserving the rock fabric of the parent material. Inherited rock fabric in regolith makes the critical zone anisotropic, affecting its mechanical and hydrological properties. Therefore, quantifying and studying anisotropy is an important part of characterising the critical zone, yet doing so remains challenging. Seismic methods can be used to detect rock fabric and infer mechanical and hydrologic conductivity anisotropy across landscapes. We present a novel way of measuring seismic anisotropy in the critical zone using Rayleigh and Love surface waves. This method leverages multi‐component surface seismic data to create a high‐resolution model of seismic anisotropy, which we compare with a nuclear magnetic resonance log measured in a nearby borehole. The two geophysical data sets show that seismic anisotropy and porosity develop at similar depths in weathered bedrock and both reach their maximum values in saprolite, implying that in situ weathering enhances anisotropy while concurrently generating porosity in the critical zone. We bolster our findings with in situ measurements of seismic and hydrologic conductivity anisotropy made in a 3 m deep soil excavation. Our study offers a fresh perspective on the importance of rock fabric in the development and function of the critical zone and sheds new insights into how weathering processes operate.
more »
« less
- Award ID(s):
- 2012353
- PAR ID:
- 10621187
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Earth Surface Processes and Landforms
- Volume:
- 50
- Issue:
- 9
- ISSN:
- 0197-9337
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Understanding how soil thickness and bedrock weathering vary across ridge and valley topography is needed to constrain the flowpaths of water and sediment production within a landscape. Here, we investigate saprolite and weathered bedrock properties across a ridge‐valley system in the Northern California Coast Ranges, USA, where topography varies with slope aspect such that north‐facing slopes have thicker soils and are more densely vegetated than south‐facing slopes. We use active source seismic refraction surveys to extend observations made in boreholes to the hillslope scale. Seismic velocity models across several ridges capture a high velocity gradient zone (from 1,000 to 2,500 m/s) located ∼4–13 m below ridgetops that coincides with transitions in material strength and chemical depletion observed in boreholes. Comparing this transition depth across multiple north‐ and south‐facing slopes, we find that the thickness of saprolite does not vary with slope aspects. Additionally, seismic survey lines perpendicular and parallel to bedding planes reveal weathering profiles that thicken upslope and taper downslope to channels. Using a rock physics model incorporating seismic velocity, we estimate the total porosity of the saprolite and find that inherited fractures contribute a substantial amount of pore space in the upper 6 m, and the lateral porosity structure varies strongly with hillslope position. The aspect‐independent weathering structure suggests that the contemporary critical zone structure at Rancho Venada is a legacy of past climate and vegetation conditions.more » « less
-
Abstract For decades, seismic imaging methods have been used to study the critical zone, Earth's thin, life‐supporting skin. The vast majority of critical zone seismic studies use traveltime tomography, which poorly resolves heterogeneity at many scales relevant to near‐surface processes, therefore limiting progress in critical zone science. Full‐waveform tomography can overcome this limitation by leveraging more seismic data and enhancing the resolution of geophysical imaging. In this study, we apply 2D full‐waveform tomography to match the phases of observed seismograms and elucidate previously undetected heterogeneity in the critical zone at a well‐studied catchment in the Laramie Range, Wyoming. In contrast to traveltime tomograms from the same data set, our results show variations in depth to bedrock ranging from 5 to 60 m over lateral scales of just tens of meters and image steep low‐velocity anomalies suggesting hydrologic pathways into the deep critical zone. Our results also show that areas with thick fractured bedrock layers correspond to zones of slightly lower velocities in the deep bedrock, while zones of high bedrock velocity correspond to sharp vertical transitions from bedrock to saprolite. By corroborating these findings with borehole imagery, we hypothesize that lateral changes in bedrock fracture density majorly impact critical zone architecture. Borehole data also show that our full‐waveform tomography results agree significantly better with velocity logs than previously published traveltime tomography models. Full‐waveform tomography thus appears unprecedentedly capable of imaging the spatially complex porosity structure crucial to critical zone hydrology and processes.more » « less
-
null (Ed.)Abstract Erosion at Earth’s surface exposes underlying bedrock to climate-driven chemical and physical weathering, transforming it into a porous, ecosystem-sustaining substrate consisting of weathered bedrock, saprolite, and soil. Weathering in saprolite is typically quantified from bulk geochemistry assuming physical strain is negligible. However, modeling and measurements suggest that strain in saprolite may be common, and therefore anisovolumetric weathering may be widespread. To explore this possibility, we quantified the fraction of porosity produced by physical weathering, FPP, at three sites with differing climates in granitic bedrock of the Sierra Nevada, California, USA. We found that strain produces more porosity than chemical mass loss at each site, indicative of strongly anisovolumetric weathering. To expand the scope of our study, we quantified FPP using available volumetric strain and mass loss data from granitic sites spanning a broader range of climates and erosion rates. FPP in each case is ≥0.12, indicative of widespread anisovolumetric weathering. Multiple regression shows that differences in precipitation and erosion rate explain 94% of the variance in FPP and that >98% of Earth’s land surface has conditions that promote anisovolumetric weathering in granitic saprolite. Our work indicates that anisovolumetric weathering is the norm, rather than the exception, and highlights the importance of climate and erosion as drivers of subsurface physical weathering.more » « less
-
Abstract Poisson's ratio for earth materials is usually assumed to be positive (Vp/Vs > 1.4). However, this assumption may not be valid in the critical zone because near Earth's surface effective pressures are low (<1 MPa), porosity has a wide range (0%–60%), there are significant texture changes (e.g., unconsolidated vs. fractured media), and saturation ranges from 0% to 100%. We present P‐wave (Vp) and S‐wave (Vs) velocities from seismic refraction profiles collected in weathered crystalline environments in South Carolina and Wyoming. Our data show that ∼20% of the subsurface has negative Poisson's ratios (Vp/Vsvalues < 1.4), a conclusion supported by borehole sonic logs. The low Vp/Vsvalues are confined to the fractured bedrock and saprolite. Our data support the hypothesis that weathering‐generated microcracks can produce a negative Poisson's ratio and that Vp/Vsvalues can thus provide insight into important critical zone weathering processes.more » « less
