An official website of the United States government
Abstract High-resolution passive seismic imaging of shallow subsurface structures is often challenged by the scarcity of coherent body-wave energy in ambient noise recorded at surface stations. We show that the autocorrelation (AC) of teleseismic P-wave coda extracted from just one month of continuous recording at 5 Hz geophones can overcome this limitation. We apply this method to investigate the longitudinal subsurface bedrock structure of Unaweep Canyon—a paleovalley in western Colorado (United States) with complex evolution. Both fluvial and glacial processes have been proposed to explain the canyon’s genesis and morphology. The teleseismic P-wave coda AC retrieves zero-offset reflections from the shallow (200–500 m depth) basement interface at 120 stations along a 5 km long profile. In addition, we invert interferometrically retrieved surface-wave dispersion for the shear-wave structure of the sedimentary fill. Combined interpretation of these results and other geophysical and well data suggests an overdeepened basement geometry most consistent with glacial processes.
more »
« less
This content will become publicly available on November 4, 2025
Imaging the Northern Los Angeles Basins with Autocorrelations
Abstract We show reflectivity cross sections for the San Gabriel, Chino, and San Bernardino basins north of Los Angeles (LA), California, determined from autocorrelations of ambient noise and teleseismic earthquake waves. These basins are thought to channel the seismic energy from earthquakes on the San Andreas fault to LA, and a more accurate model of their depth is important for hazard mitigation. We use the causal side of the autocorrelation function (ACF) to determine the zero-offset reflection response. To minimize the smoothing effect of the source time function, we remove the common mode from the autocorrelation to reveal the zero-offset reflection response. We apply this to 10 temporary nodal lines consisting of a total of 758 geophones with an intraline spacing of 250–300 m. We also show that the ACF from teleseismic events can provide illumination on the subsurface that is consistent with ambient noise. Both autocorrelation results compare favorably to receiver functions.
more »
« less
- Award ID(s):
- 2105358
- PAR ID:
- 10621303
- Publisher / Repository:
- Seismological Society of America
- Date Published:
- Journal Name:
- Seismological Research Letters
- Volume:
- 96
- Issue:
- 3
- ISSN:
- 0895-0695
- Page Range / eLocation ID:
- 1791 to 1801
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We construct a new shear velocity model for the San Gabriel, Chino and San Bernardino basins located in the northern Los Angeles area using ambient noise correlation between dense linear nodal arrays, broadband stations, and accelerometers. We observe Rayleigh and Love waves in the correlation of vertical (Z) and transverse (T) components, respectively. By combining Hilbert and Wavelet transforms, we obtain the separated fundamental and first higher mode of the Rayleigh wave dispersion curves based on their distinct particle motion polarization. Basin depths constrained by receiver functions, gravity, and borehole data are incorporated into the prior model. Our 3D shear wave velocity model covers the upper 3–5 km of the crust in the San Gabriel, Chino and San Bernardino basin area. The Vs model is in agreement with the geological and geophysical cross‐sections from other studies, but discrepancies exist between our model and a Southern California Earthquake Center community velocity model. Our shear wave velocity model shows good consistency with the CVMS 4.26 in the San Gabriel basin, but predicts a deeper and slower sedimentary basin in the San Bernardino and Chino basins than the community model.more » « less
-
We constrained sedimentary basin structure using a nodal seismic array consisting of ten dense lines that overlie multiple basins in the northern Los Angeles area. The dense array consists of 758 seismic nodes, spaced ~250–300 m apart along linear transects, that recorded ground motions for 30–35 days. We applied the receiver function (RF) technique to 16 teleseismic events to investigate basin structure. Primary basin-converted phases were identified in the RFs. A shear wave velocity model produced in a separate study using the same dataset was incorporated to convert the basin time arrivals to depth. The deepest part of the San Bernardino basin was identified near the Loma Linda fault at a depth of 2.4 km. Basin depths identified at pierce points for separate events reveal lateral changes in basin depth across distances of ~2–3 km near individual stations. A significant change in basin depth was identified within a small distance of ~4 km near the San Jacinto fault. The San Gabriel basin exhibited the largest basin depths of all three basins, with a maximum depth of 4.2 km. The high lateral resolution from the dense array helped to reveal more continuous structures and reduce uncertainties in the RFs interpretation. We discovered a more complex basin structure than previously identified. Our findings show that the basins’ core areas are not the deepest, and significant changes in basin depth were observed near some faults, including the San Jacinto fault, Fontana fault, Red Hill fault and Indian Hill fault.more » « less
-
Abstract We simulate scattering delays from the interstellar medium to examine the effectiveness of three estimators in recovering these delays in pulsar timing data. Two of these estimators use the more traditional process of fitting autocorrelation functions to pulsar dynamic spectra to extract scintillation bandwidths, while the third estimator uses the newer technique of cyclic spectroscopy on baseband pulsar data to recover the interstellar medium’s impulse response function. We find that either fitting a Lorentzian or Gaussian distribution to an autocorrelation function or recovering the impulse response function from the cyclic spectrum are, on average, accurate in recovering scattering delays, although autocorrelation function estimators have a large variance, even at high signal-to-noise ratio (S/N). We find that, given sufficient S/N, cyclic spectroscopy is more accurate than both Gaussian and Lorentzian fitting for recovering scattering delays at specific epochs, suggesting that cyclic spectroscopy is a superior method for scattering estimation in high-quality data.more » « less
-
Abstract Seismic and infrasound multistation ambient‐noise interferometry has been widely used to infer ground and atmospheric properties, and single‐station and autocorrelation seismic interferometry has also shown potential for characterizing Earth structure at multiple scales. We extend autocorrelation seismic interferometry to ambient atmospheric infrasound recordings that contain persistent local noise from waterfalls and rivers. Across a range of geographic settings, we retrieve relative sound‐speed changes that exhibit clear diurnal oscillations consistent with temperature and wind variations. We estimate ambient air temperatures from variations in relative sound speeds. The frequency band from 1 to 2 Hz appears most suitable to retrieve weather parameters as nearby waterfalls and rivers may act as continuous and vigorous sources of infrasound that help achieve convergence of coherent phases in the autocorrelation codas. This frequency band is also appropriate for local sound‐speed variations because it has infrasound with wavelengths of ∼170–340 m, corresponding to a typical atmospheric boundary layer height. After applying array analysis to autocorrelation functions derived from a three‐element infrasound array, we find that autocorrelation codas are composed of waves reflected off nearby topographic features, such as caldera walls. Lastly, we demonstrate that autocorrelation infrasound interferometry offers the potential to study the atmosphere over at least several months and with a fine time resolution.more » « less
