Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Development and characterization of an aircraft inlet system for broader quantitative particle sampling at higher altitudes: aerodynamic lenses, beam and vaporizer diagnostics, and pressure-controlled inlets
Title: Development and characterization of an aircraft inlet system for broader quantitative particle sampling at higher altitudes: aerodynamic lenses, beam and vaporizer diagnostics, and pressure-controlled inlets
Abstract. Field-deployable real-time aerosol mass spectrometers (AMSs) typically use an aerodynamic lens as an inlet that collimates aerosols into a narrow beam over a wide range of particle sizes. Such lenses need constant upstream pressure to work consistently. Deployments in environments where the ambient pressure changes, e.g., on aircraft, typically use pressure-controlled inlets (PCIs). These have performed less well for supermicron aerosols, such as the larger particles in stratospheric air and some urban hazes. In this study, we developed and characterized a new PCI design (“CU PCI-D”) coupled with a recently developed PM2.5 aerodynamic lens, with the goal of sampling the full accumulation mode of ambient aerosols with minimal losses up to upper troposphere and lower stratosphere (UTLS) altitudes. A new computer-controlled lens alignment system and a new 2D particle beam imaging device that improves upon the Aerodyne aerosol beam width probe (BWP) have been developed and tested. These techniques allow for fast automated aerosol beam width and position measurements and ensure the aerodynamic lens is properly aligned and characterized for accurate quantification, in particular for small sizes that are hard to access with monodisperse measurements. The automated lens alignment tool also allows position-dependent thermal decomposition to be investigated on the vaporizer surface. The CU PCI-D was tested on the TI3GER campaign aboard the NCAR/NSF G-V aircraft. Based on comparisons with the co-sampling UHSAS particle sizer, the CU aircraft AMS with the modified PCI consistently measured ∼ 89 % of the accumulation-mode particle mass in the UTLS.  more » « less
Award ID(s):
2027252
PAR ID:
10628785
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
Copernicus Publications for the European Geosciences Union (Germany)
Date Published:
Journal Name:
Aerosol Research
Volume:
3
Issue:
2
ISSN:
2940-3391
Page Range / eLocation ID:
371 to 404
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Environmental Science: Processes & Impacts)
    Due to their small size, measurements of the complex composition of atmospheric aerosol particles and their surfaces are analytically challenging. This is particularly true for microspectroscopic methods, where it can be difficult to optically identify individual particles smaller than the diffraction limit of visible light (∼350 nm) and measure their vibrational modes. Recently, surface enhanced Raman spectroscopy (SERS) has been applied to the study of aerosol particles, allowing for detection and characterization of previously undistinguishable vibrational modes. However, atmospheric particles analyzed via SERS have primarily been >1 μm to date, much larger than the diameter of the most abundant atmospheric aerosols (∼100 nm). To push SERS towards more relevant particle sizes, a simplified approach involving Ag foil substrates was developed. Both ambient particles and several laboratory-generated model aerosol systems (polystyrene latex spheres (PSLs), ammonium sulfate, and sodium nitrate) were investigated to determine SERS enhancements. SERS spectra of monodisperse, model aerosols between 400–800 nm were compared with non-SERS enhanced spectra, yielding average enhancement factors of 10 2 for both inorganic and organic vibrational modes. Additionally, SERS-enabled detection of 150 nm size-selected ambient particles represent the smallest individual aerosol particles analyzed by Raman microspectroscopy to date, and the first time atmospheric particles have been measured at sizes approaching the atmospheric number size distribution mode. SERS-enabled detection and identification of vibrational modes in smaller, more atmospherically-relevant particles has the potential to improve understanding of aerosol composition and surface properties, as well as their impact on heterogeneous and multiphase reactions involving aerosol surfaces. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, mBio)
    Tuberculosis, a persistent public health challenge worldwide, is transmitted when exhaledMycobacterium tuberculosis(Mtb) particles expelled from an infected individual are inhaled by a susceptible person. To study the adaptation of Mtb during transition between hosts, we developed a transmission simulation system (TSS) that combines controlled pathogen aerosolization and measurement of bioaerosol particle characteristics with in-flight sampling of Mtb and infection of mice by nose-only exposure. Using scattered-light spectrometry, we demonstrated that Mtb aerosol concentrations generated by the TSS better represented human cough than the aerosol concentrations produced by a full-body inhalation exposure system commonly used for Mtb infection of mice. Additionally, the TSS deposited clinically relevant low doses of Mtb into murine lungs with greater precision than the full-body inhalation exposure systems. The TSS revealed a linear correlation between Mtb inoculum concentration and pathogen deposition in murine lungs up to 200 colony-forming units. Higher inoculum concentrations led to a reduction in total particle number, which resulted in disproportionately lower pulmonary infection doses. Importantly, the particle size distributions of Mtb-laden aerosols produced by the TSS mirrored those of tuberculosis patient coughs, with 90% of culturable Mtb found in particles with aerodynamic diameters below 3.3 µm. In conclusion, the TSS represents a novel effective and precise translational platform enabling detailed biophysical and molecular studies of Mtb transmission. Tuberculosis is transmitted when exhaledMycobacterium tuberculosis(Mtb)-laden microdroplets of an infected individual are inhaled by a susceptible person. Historically, studies on Mtb transmission have focused mainly on epidemiology due to the technical challenges in replicating the transmission process effectively in a laboratory setting. In this study, we introduce a transmission simulation system (TSS) that integrates controlled Mtb aerosolization, biophysical aerosol particle measurements, in-flight Mtb sampling, and aerosol infection of mice. The TSS generated Mtb bioaerosol concentrations comparable to those produced by human coughs. These pathogen droplets were accurately deposited in mouse lungs at low Mtb doses relevant to human transmission. Notably, the distribution of Mtb among aerosol particles of various sizes closely mirrored that found in the coughs of tuberculosis patients. In summary, the TSS represents a novel tool for conducting molecular studies of Mtb transmission through the air. 
    more » « less
  3. ; ; ; (, Environmental Science & Technology)
    Ambient aerosols are complex mixtures containing thousands of unique organic molecules. However, due to the large surface-area-to-volume ratio of aerosol droplets, surface-active molecules can become depleted in the droplet bulk, resulting in a size-dependent surface tension. Size-dependent partitioning models have been extensively tested for droplets containing a single surfactant and cosolute. However, these simple systems do not mimic the complexity of ambient aerosols. Here, we compare surface tension predictions from mixed-surfactant partitioning schemes to experimentally measured droplet surface tensions for nonionic surfactants octyl-$$\beta$$-D-thioglucopyranoside and Tween20 with soluble organic glutaric acid. We first compare model predictions from two macroscopic mixed-surfactant partitioning schemes, the multicomponent Eberhart model and the ideal mixture of homologues model. We then pair these models with size-dependent partitioning models, which take into account the droplet's surface-area-to-volume ratio. Additionally, we test the applicability of treating a complex mixture with a surrogate surfactant or an effective Langmuir isotherm for the prediction of ambient aerosol surface tension. Our results suggest that an effective Langmuir isotherm, determined from macroscopic measurements of aerosol extracts, paired with a simple kinetic partitioning model, may be sufficient to describe the surface tension of accumulation mode aerosol. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the National Academy of Sciences)
    Anthropogenic ammonia (NH3) emissions have significantly increased in recent decades due to enhanced agricultural activities, contributing to global air pollution. While the effects of NH3on surface air quality are well documented, its influence on particle dynamics in the upper troposphere-lower stratosphere (UTLS) and related aerosol impacts remain unquantified. NH3reaches the UTLS through convective transport and can enhance new particle formation (NPF). This modeling study evaluates the global impact of anthropogenic NH3on UTLS particle formation and quantifies its effects on aerosol loading and cloud condensation nuclei (CCN) abundance. We use the EMAC Earth system model, incorporating multicomponent NPF parameterizations from the CERN CLOUD experiment. Our simulations reveal that convective transport increases NH3-driven NPF in the UTLS by one to three orders of magnitude compared to a baseline scenario without anthropogenic NH3, causing a doubling of aerosol numbers over high-emission regions. These aerosol changes induce a 2.5-fold increase in upper tropospheric CCN concentrations. Anthropogenic NH3emissions increase the relative contribution of water-soluble inorganic ions to the UTLS aerosol optical depth (AOD) by 20% and increase total column AOD by up to 80%. In simulations without anthropogenic NH3, UTLS aerosol composition is dominated by sulfate and organic species, with a marked reduction in ammonium nitrate and aerosol water content. This results in a decline of aerosol mass concentration by up to 50%. These findings underscore the profound global influence of anthropogenic NH3emissions on UTLS particle formation, AOD, and CCN production, with important implications for cloud formation and climate. 
    more » « less
  5. ; ; (, Oxford Open Climate Change)
    Abstract Cloud formation in the Pi Convection–Cloud Chamber is achieved via ionization in humid conditions, without the injection of aerosol particles to serve as cloud condensation nuclei (CCN). Abundant ions, turbulence, and supersaturated water vapor combine to produce new particles, which grow to become CCN sized and eventually are activated to form clouds. Coupling between the new particle formation and cloud droplets causes predator-prey type oscillations in aerosol and droplet concentrations under turbulent conditions. Leading terms are identified in the budgets for Aitken and accumulation mode aerosols and for cloud droplets. The cloud coupling is proposed to be a result of cloud-induced runaway CCN production through aerosol scavenging. The experiments suggest potential applications to marine cloud brightening, in which ions rather than sea-salt aerosols are generated. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email