skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


This content will become publicly available on May 20, 2026

Title: Selective detection of SO 2 in NU-1000 via organometallic nickel silylphosphine post-synthetic complex incorporation
The adsorption and detection of SO2 using Zr-based MOF, NU-1000 grafted with an organometallic nickel silylphosphine complex ([NiSi]@NU-1000) via post-synthetic modification are reported. [NiSi]@NU-1000 exhibits high stability under dry and wet SO2, with a high cyclability performance. Moreover, fluorescence experiments postulate [NiSi]@NU-1000 as a promising SO2 detector due to its high SO2 selectivity over CO2 and air, showing an evident quenching effect, especially at low SO2 concentrations (0.1 bar of SO2). Time-resolved photoluminescence experiments suggest that host-guest SO2 interactions are associated with the turn-off effect  more » « less
Award ID(s):
2102689
PAR ID:
10630581
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Dalton Transactions
Volume:
54
Issue:
20
ISSN:
1477-9226
Page Range / eLocation ID:
8029 to 8034
Subject(s) / Keyword(s):
MOF materials Ni organometallic silylphosphines post-synthetic complex incorporation
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    The mechanism of ethene hydrogenation to ethane on six dicationic 3d transition metal catalysts is investigated. Specifically, a combination of density functional theory (DFT), microkinetic modeling, and high throughput reactor experiments is used to interrogate the active sites and mechanisms for Mn@NU-1000, Fe@NU-1000, Co@NU-1000, Ni@NU-1000, Cu@NU-1000, and Zn@NU-1000 catalysts, where NU-1000 is a metal–organic framework (MOF) capable of supporting metal cation catalysts. The combination of experiments and simulations suggests that the reaction mechanism is influenced by the electron configuration and spin state of the metal cations as well as the amount of hydrogen that is adsorbed. Specifically, Ni@NU-1000, Cu@NU-1000, and Zn@NU-1000, which have more electrons in their d shells and operate in lower spin states, utilize a metal hydride active site and follow a mechanism where the metal cation binds with one or more species at all steps, whereas Mn@NU-1000, Fe@NU-1000, and Co@NU-1000, which have fewer electrons in their d shells and operate in higher spin states, utilize a bare metal cation active site and follow a mechanism where the number of species that bind to the metal cation is minimized. Instead of binding with the metal cation, catalytic species bind with oxo ligands from the NU-1000 support, as this enables more facile H 2 adsorption. The results reveal opportunities for tuning activity and selectivity for hydrogenation on metal cation catalysts by tuning the properties that influence hydrogen content and spin, including the metal cations themselves, the ligands, the binding environments and supports, and/or the gas phase partial pressures. 
    more » « less
  2. The new material [RuGa]@NU-1000 incorporates Ru and Ga in 1.2 and 1.8 wt% respectively (molar ratio 1 : 2). It stems from the grafting of the heterobimetallic ruthenium gallate complex, [MeRu(η 6 -C 6 H 6 )(PPh 3 ) 2 ][GaMe 2 Cl 2 ] into the MOF material NU-1000. [RuGa]@NU-1000 shows enhanced adsorption of SO 2 , specially at low pressures (10 −3 bar) even when compared with other materials employing more expensive precious metals. Additionally, [RuGa]@NU-1000 samples need not be exposed to such harsh conditions for reactivation as they retain their adsorption properties after several cycles and preserve their porosity and structure. Thus, [RuGa]@NU-1000 is an excellent, selective material suitable for detection and precise quantification of SO 2 , with a lower cost compared to other MOFs incorporating precious metals. 
    more » « less
  3. Abstract Traditional MOF e‐CRR, constructed from catalytic linkers, manifest a kinetic bottleneck during their multi‐electron activation. Decoupling catalysis and charge transport can address such issues. Here, we build two MOF/e‐CRR systems, CoPc@NU‐1000 and TPP(Co)@NU‐1000, by installing cobalt metalated phthalocyanine and tetraphenylporphyrin electrocatalysts within the redox active NU‐1000 MOF. For CoPc@NU‐1000, the e‐CRR responsive CoI/0potential is close to that of NU‐1000 reduction compared to the TPP(Co)@NU‐1000. Efficient charge delivery, defined by a higher diffusion (Dhop=4.1×10−12 cm2 s−1) and low charge‐transport resistance (=59.5 Ω) in CoPC@NU‐1000 led FECO=80 %. In contrast, TPP(Co)@NU‐1000 fared a poor FECO=24 % (Dhop=1.4×10−12 cm2 s−1and=91.4 Ω). For such a decoupling strategy, careful choice of the host framework is critical in pairing up with the underlying electrochemical properties of the catalysts to facilitate the charge delivery for its activation. 
    more » « less
  4. MOF NU-1000 was employed to host Ni tripodal complexes prepared from new organometallic precursors [HNi(κ4(E,P,P,P)-E(o-C 6 H 4 CH 2 PPh 2 ) 3 ], E = Si (Ni-1), Ge (Ni-2). The new heterogenous catalytic materials, Ni-1@NU-1000 and Ni-2@NU-1000 show the advantages of both homogenous and heterogeneous catalysts. They catalyze the hydroboration of aldehydes and ketones more efficiently than the homogenous Ni-1 and Ni-2, under aerobic conditions, and allowing recyclability of the catalyst. 
    more » « less
  5. Abstract. Climate variability in the last millennium (past 1000 years) is dominated by the effects of large-magnitude volcanic eruptions; however, a long-standing mismatch exists between model-simulated and tree-ring-derived surface cooling. Accounting for the self-limiting effects of large sulfur dioxide (SO2) injections and the limitations in tree-ring records, such as lagged responses due to biological memory, reconciles some of the discrepancy, but uncertainties remain, particularly for the largest tropical eruptions. The representation of volcanic forcing in the latest generation of climate models has improved significantly, but most models prescribe the aerosol optical properties rather than using SO2 emissions directly and including interactions between the aerosol, chemistry, and dynamics. Here, we use the UK Earth System Model (UKESM) to simulate the climate of the last millennium (1250–1850 CE) using volcanic SO2 emissions. Averaged across all large-magnitude eruptions, we find similar Northern Hemisphere (NH) summer cooling compared with other last-millennium climate simulations from the Paleoclimate Modelling Intercomparison Project Phase 4 (PMIP4), run with both SO2 emissions and prescribed forcing, and a continued overestimation of surface cooling compared with tree-ring reconstructions. However, for the largest-magnitude tropical eruptions in 1257 (Mt. Samalas) and 1815 (Mt. Tambora), some models, including UKESM1, suggest a smaller NH summer cooling that is in better agreement with tree-ring records. In UKESM1, we find that the simulated volcanic forcing differs considerably from the PMIP4 dataset used in models without interactive aerosol schemes, with marked differences in the hemispheric spread of the aerosol, resulting in lower forcing in the NH when SO2 emissions are used. Our results suggest that, for the largest tropical eruptions, the spatial distribution of aerosol can account for some of the discrepancies between model-simulated and tree-ring-derived cooling. Further work should therefore focus on better resolving the spatial distribution of aerosol forcing for past eruptions. 
    more » « less