An official website of the United States government
Mixed-matrix electrospun membranes were developed to investigate ammonium removal from low ammonium concentration wastewaters for the first time. Particles derived from the inexpensive zeolite 13X were successfully incorporated into polyethersulfone (PES) matrices. The fabricated mixed-matrix electrospun membranes demonstrate high ammonium removal capacity reaching over 55 mg/gzeolite, more than 2.5 times higher than the previously fabricated mixed-matrix membranes via non-solvent induced phase inversion. Moreover, the membranes fabricated exhibit high permeability and ease of regeneration. Over 90% of total ammonium nitrogen (TAN) can be removed from low TAN wastewaters such as aquaculture wastewaters. In addition to zeolite 13X, other zeolite particles including zeolite Y, zeolite 3A and 4A were also incorporated into the membrane matrix. The inexpensive zeolite 13X show the highest ammonium exchange capacity. Particle type, loading and the level of its dispersion all affect TAN removal capacity.
more »
« less
This content will become publicly available on January 1, 2026
Sulfonated Polyethersulfone Membranes for Brackish Water Desalination: Fabrication, Characterization, and Electrodialysis Performance Evaluation
The widespread application of electrodialysis is constrained by the high cost of ion exchange membranes, necessitating the development of affordable alternatives. This study focuses on the fabrication and performance evaluation of cation exchange membranes made from polyethersulfone (PES) and sulfonated polyethersulfone (sPES). Membranes were synthesized through phase inversion with varying solvent evaporation times, using N-Methyl-2-Pyrrolidone (NMP) as the solvent. The structural and functional modifications were confirmed using FTIR, XPS, and AFM techniques. Performance tests identified optimal electrodialysis results for PES membranes with a 3 h solvent evaporation time and for sPES membranes with a 1 h evaporation time. Under varying operational conditions, including applied voltage, flow rates, and feed solutions, sPES membranes demonstrated superior performance, underscoring their potential for cost-effective brackish water desalination applications.
more »
« less
- PAR ID:
- 10631500
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Applied Sciences
- Volume:
- 15
- Issue:
- 1
- ISSN:
- 2076-3417
- Page Range / eLocation ID:
- 216
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
2-Methylpyrazine (2MP), a flavoring agent, was identified and used as a novel greener solvent for nonsolvent-induced phase separation (NIPS) fabrication of poly(ether sulfone) (PES) ultrafiltration (UF) membranes. Flat-sheet membranes were fabricated with 2MP-cosolvent blends, N,N-dimethylacetamide (DMAc), or dimethyl sulfoxide (DMSO), to investigate the influence of solvent choice on membrane properties and performance. The resulting membranes were characterized to assess morphology, productivity, and molecular weight cutoff (MWCO). In addition, kinetic and thermodynamic aspects of solvent choice on the polymer “dope” solutions during the NIPS process were examined. 2MP-cosolvent blends resulted in membranes with noticeably different morphologies, which arise from miscibility-hindered solvent–nonsolvent exchange during membrane formation. Membrane permeance was significantly lower for 2MP-cosolvent membranes when compared to DMAc and DMSO membranes; however, their MWCOs were clearly decreased. This initial study shows that 2MP is a promising greener solvent candidate for NIPS, and further investigations are warranted.more » « less
-
Tarabra, V (Ed.)Thin-film-composite (TFC) nanofiltration membranes represent the pinnacle of membrane technology in water treatment and desalination. These membranes typically consist of a polyamide (PA) selective layer and a membrane support layer, often constructed from commercially available materials like polyethersulfone (PES). However, there exists an alternative approach that involves the use of different polymers, preferably upcycled waste polymers, as a viable support layer for TFC membranes. Successfully implementing the upcycling of waste plastics into high-value support membranes can make a significant contribution to addressing the issue of plastic waste pollution. One of the primary challenges associated with utilizing upcycled polymers as support layers is the potential impact on the polyamide selective layer of TFC membranes, subsequently affecting their performance in terms of permeability, rejection, and antifouling properties. In this study, we demonstrate the successful fabrication of TFC membranes with a support layer crafted from upcycled waste PVC pipe. We conducted a comprehensive investigation into the effects of upcycled PVC on the structural and physicochemical properties of the polyamide layer. The ultrafiltration (UF) support membranes were fabricated from waste PVC pipe via the nonsolvent induced phase separation (NIPS) method. Subsequently, a polyamide layer was synthesized atop the Upcycled PVC membrane using interfacial polymerization (IP). The physicochemical properties and performance of the TFC membranes with upcycled PVC support layer were compared with membranes with research-grade (RG) PVC and commercial PES support layers. The results unveiled that the TFC membrane with upcycled PVC support layer exhibited higher water permeability (18.2 LMH/bar), in contrast to RG TFC (15.5 LMH/bar) and PES TFC membranes (13.7 LMH/bar). Furthermore, the salt rejection capabilities of the upcycled PVC TFC membrane were competitive and well within an acceptable range.more » « less
-
Abstract In this study, pentablock terpolymers with methylpyrrolidinium cations were characterized and investigated as anion exchange membranes and ionomers for solid‐state alkaline fuel cells. The pentablock terpolymer (with methylpyrrolidinium cations) membranes exhibited higher fuel cell power density and durability than commercial FuMA‐Tech (with quaternary ammonium cations) membranes at 30 °C, 100% relative humidity (RH). Optimization of the catalyst ink composition (i.e., solids and solvent ratio) and fuel cell performance of membrane electrode assemblies (MEAs) with pentablock terpolymers as both the membrane and ionomer were also investigated. Optimization of the fuel cell operating conditions corroborates with thein situelectrochemical impedance spectroscopy results. The pentablock terpolymer MEA exhibited a maximum power density of 83.3 mW cm−2and voltage decay rate of 0.7 mV h−1after 100 h of operation under 40 °C, 100% RH. These results show promise for pentablock terptolymers with methylpyrrolidinium cations as a commercially attractive low‐cost alternative anion exchange membrane and ionomer for solid‐state alkaline fuel cells.more » « less
-
Membrane technology has become a promising solution for a wide range of separation processes, including wastewater treatment, solvent recovery, and oil–water separation, due to its low energy consumption, cost-effectiveness, and minimal space needs. However, membrane damage caused by suspended pollutants or improper handling remains a challenge, often leading to decreased filtration capability and the need for replacement of membrane modules. Self-repairing membranes have emerged as a new solution, with various materials demonstrating autonomous healing properties through dynamic bonds such as hydrogen bonds or boronic ester bonds. However, many of these self-repairing membranes suffer from excessive swelling in water, compromising their mechanical stability. Herein, we report a self-repairing and low-swelling polymer network based on dopamine acrylamide (DA) and n-butyl acrylate (BA), crosslinked with p-phenylenediboronic acid (PDBA). The boronic ester bond formation between catechol and boronic acid groups confers self-healing properties to the polymer, while the hydrophobic nature of BA minimizes swelling in water. The polymer exhibits a low swelling ratio of 2.1% after 7 days of submersion in water. A cellulose-based filter paper coated with the polymer demonstrated that it can recover its water flux up to 91% after repairing damage. Lastly, an ultrafiltration polyethersulfone (PES)-based filter coated with the polymer demonstrated that it recovers its solute rejection capability after repairing damage.more » « less
