skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Dynamic Characterization of a Full-Scale Three-Story Mass Timber Building Structure
A veneer-based engineered wood product known as Mass Ply Panels (MPP) was recently introduced and certified per ANSI-PRG 320. A full-scale three-story mass timber building structure was constructed and tested at Oregon State University to demonstrate the potential of MPP in the design of resilient, structural lateral force-resisting systems. The building structure comprised MPP diaphragms, laminated veneer lumber (LVL) beams and columns, and an MPP rocking wall design. Two opportunistic vibration tests were performed to charac-terize the dynamic properties of the structure. First, an implosion of a stadium within 600 m of the building location was used as the main excitation source, during which bi-directional horizontal acceleration data were collected for approximately 18 seconds. Second, an ambient vibration test was conducted to collect horizontal acceleration data for one hour. In both tests, sixteen accelerometers were used to measure the response of the structure. Modal features were extracted using an output-only method and compared with the estimates from a finite element model. Lessons learned can be used to inform future modeling efforts of a mass timber building to be tested on the Natural Hazards Engineering Research Infrastructure (NHERI) Experimental Facility at the University of California San Diego high-performance outdoor shake table.  more » « less
Award ID(s):
2120683
PAR ID:
10632052
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
International Conference on Structural Dynamics
Date Published:
Journal Name:
Journal of Physics: Conference Series
Volume:
2647
Issue:
18
ISSN:
1742-6588
Page Range / eLocation ID:
182044
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, 12th National Conference on Earthquake Engineering)
    Mass timber products are gaining popularity in North America as an alternative to traditional construction materials as part of both the gravity and lateral force-resisting system. However, several knowledge gaps still exist in terms of their expected seismic performance and plausible hybridizations with other materials, e.g. steel energy dissipators. This research explores the potential use of wall spine systems consisting of mass ply panels (MPP) and steel buckling-restrained braces (BRBs) as energy dissipators. The proposed BRB-MPP spine assembly makes up the lateral force-resisting system of a three-story mass-timber building segment that will be tested under cyclic quasi-static loading at Oregon State University. The proposed design methodology follows displacement-based design principles to determine the minimum required stiffness to limit inelastic story drift ratios at the design earthquake level. The MPP spine and BRB-to-MPP connections were capacity designed to resist forces transferred by the BRBs at roof drift ratios beyond the risk-targeted Maximum Considered Earthquake (MCER). This design solution provides an interesting alternative for the design of modern mass timber buildings. The results obtained in the experimental campaign will be used to validate the design methodology and the behavior of the innovative structural system. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, World Conference on Timber Engineering (WCTE 2023))
    This paper describes the lateral force resisting system (LFRS) design in a full-scale six-story shake-table test building and presents a comparative cradle-to-grave life-cycle assessment of alternative LFRSs. The test building features the reuse of material from a ten-story shake-table structure comprised of engineered mass timber (MT) products. These include MT floors (cross-, glue-, nail-, and dowel-laminated timber [CLT], [GLT], [NLT], [DLT]); MT posttensioned rocking walls (CLT and mass ply panels [MPP]); and a gravity system consisting of laminated-veneer lumber (LVL) beams and columns. Shake-table testing will benchmark innovative, low-damage design solutions for the LFRSs. To supplement this test, the environmental impact of a MT LFRS is determined relative to design alternatives that use conventional materials. The Athena Impact Estimator for Buildings was used to perform a comparative, cradle-to-grave life-cycle assessment (LCA) of the prototype MT LFRS with respect to an alternative, functionally equivalent reinforced concrete (RC) shear wall design. The LCA results showed reduced environmental impacts across some impact metrics, with a significant reduction in Global Warming Potential for the MT LFRS when accounting for biogenic carbon. 
    more » « less
  3. ; ; ; ; ; (, Construction and Building Materials)
    The length of mass timber wall panels is a limiting factor in designing taller buildings. Splice designs are needed to maintain panel transportability while transferring shear and moment forces from higher floors to the foundation under lateral loading. One such splice design utilizes structural adhesive to glue threaded steel rods into the ends of wall panels being connected. This paper reports tests of the tension capacity of glued-in rods embedded in Mass Ply Panels (MPP). Twenty glued-in rods were tested under monotonic and cyclic protocols. Embedment depths ranged between 304.8 mm (12 in.) and 812.8 mm (32 in.). Load and displacement were measured during tests to report values per ISO 6891 and an international code council acceptance criteria document. Elastic stiffness, peak capacity, design capacity, and a predictive capacity equation were determined. Results showed a similar stiffness for all embedment depths and a negligible difference between peak capacities from monotonic and cyclic testing. While the data reported is only directly applicable for analysis of the specific MPP and epoxy combination used in the test program, the methodology herein can be utilized for future testing of timber-adhesive glued-in rods. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, World Conference On Timber Engineering 2025)
    A full-scale, six-story, mass timber building including Mass Ply Panel (MPP) self-centering rocking walls with Buckling-Restrained Boundary Elements (BRBs) was tested at the Large High-Performance Outdoor Shake Table (LHPOST6) at the University of California, San Diego (UCSD). Measured sensor and derived data included global responses, such as floor displacements and accelerations, along with local responses, such as post-tensioning (PT) forces and uplift displacements, among others. The three-dimensional shake table testing program included 23 ground motion records with intensities of shaking ranging from Service (SLE) up to Risk-Targeted Maximum Considered Earthquake (MCER) levels. Results highlighted that: [i] the drift response was near uniform along the height of the building, [ii] the acceleration response included large contributions from the higher modes, [iii] the PT rods remained elastic and had stable post-tensioning force throughout the test program, and [iv] the self-centering system resulted in negligible residual drifts. Qualitative observations from construction and testing were also cataloged to further support the feasibility of implementation in practice. By combining steel BRBs and post-tensioning rods with MPP rocking elements, the system was able to meet the enhanced seismic performance goals targeted for the project. Future work will seek to define both resilience and sustainability targets for designs incorporating multiple performance objectives. 
    more » « less
  5. ; ; ; ; ; (, World Conference on Timber Engineering (WCTE 2023))
    Mass timber panels are emerging as an innovative alternative for the design of elastic spines due to their high stiffness- and strength-to-weight ratio, among other factors. Recent research has shown that mass timber panels used in conjunction with steel energy dissipators are promising solutions for enhanced seismic performance. However, the available experimental data at the building scale is still minimal, which limits the understanding, adoption, and development of effective seismic design guidelines for these systems. This research addresses this gap through full-scale quasi-static cyclic testing of a three-story mass timber building. Lateral loads are transferred through Mass Ply Panel (MPP) diaphragms to an MPP spine with vertically-oriented unbonded steel buckling-restrained braces (BRBs) as energy dissipating boundary elements in the first story. The only elements designed to dissipate energy in the inelastic range are the BRBs. The building specimen achieved low-structural damage and enhanced-performance goals, being able to reach a 4% roof drift ratio with little loss of strength and stiffness. The proposed pivoting detail was effective in mitigating compressive damage at the wall toe. To support the experimental campaign and future design procedures, a high-fidelity numerical model of the building was developed using OpenSees. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email