skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Experimental and Numerical Simulation of a Three-Story Mass Timber Building with a Pivoting Wall and Buckling-Restrained Boundary Elements

This content will become publicly available on July 1, 2026

Title: Experimental and Numerical Simulation of a Three-Story Mass Timber Building with a Pivoting Wall and Buckling-Restrained Boundary Elements
Steel energy dissipators can be combined with mass timber in integrated seismic lateral force–resisting systems to achieve designs with enhanced seismic performance and sustainability benefits. Examples of such integration include the use of mass timber post-tensioned rocking walls equipped with steel energy dissipation devices. This study proposes a solution using buckling-restrained boundary elements (BRBs) with mass timber walls detailed to pivot about a pinned base. This design allows the walls to rotate with minimal flexural restraint, distributing drift demands more uniformly with building height and reducing crushing damage at the wall base. Experimental quasi-static cyclic tests and numerical simulations were used to characterize the first- and higher-mode behavior of a full-scale three-story building featuring a mass timber gravity system and the proposed mass timber-BRB system. Under first-mode loading, the specimen reached 4% roof drift ratio with stable hysteretic behavior and a nearly uniform story drift profile. While residual drifts were nonnegligible due to the lack of self-centering, analytical estimates indicate realignment is likely feasible at the design earthquake level. Under second-mode loading, the specimen exhibited near-linear behavior with high stiffness. Experimental results were corroborated with numerical simulations for the isolated gravity frame, first-mode-like, and second-mode-like loading protocols. It is expected that results from this study will facilitate greater use of mass timber seismic lateral force–resisting systems.  more » « less
Award ID(s):
2120683
PAR ID:
10632063
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
ResearchGate
Date Published:
Journal Name:
Journal of Structural Engineering
Volume:
151
Issue:
7
ISSN:
0733-9445
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Designsafe-CI)
    A lateral force resisting system (LFRS) comprised of one eight-foot-wide Mass Ply Panel (MPP) with Buckling-Restrained Braces (BRBs) was attached to the building frame and tested following a cyclic quasi-static loading protocol up to 4% roof drift ratio. This system was designed to pivot about a pinned base, allowing the wall to rotate with minimal flexural restraint, thereby distributing drift demands more uniformly across the building height and reducing crushing damage at the wall base. Under first-mode loading, the system exhibited stable hysteretic behavior with a nearly uniform story drift profile, while second-mode loading revealed near-linear behavior with high stiffness. Experimental results provide valuable insights into the behavior of mass timber seismic lateral force-resisting systems and can be reused to develop and validate design guidelines for their broader implementation in seismic regions. 
    more » « less
  2. ; ; ; ; ; (, 12th National Conference on Earthquake Engineering)
    Mass timber products are gaining popularity in North America as an alternative to traditional construction materials as part of both the gravity and lateral force-resisting system. However, several knowledge gaps still exist in terms of their expected seismic performance and plausible hybridizations with other materials, e.g. steel energy dissipators. This research explores the potential use of wall spine systems consisting of mass ply panels (MPP) and steel buckling-restrained braces (BRBs) as energy dissipators. The proposed BRB-MPP spine assembly makes up the lateral force-resisting system of a three-story mass-timber building segment that will be tested under cyclic quasi-static loading at Oregon State University. The proposed design methodology follows displacement-based design principles to determine the minimum required stiffness to limit inelastic story drift ratios at the design earthquake level. The MPP spine and BRB-to-MPP connections were capacity designed to resist forces transferred by the BRBs at roof drift ratios beyond the risk-targeted Maximum Considered Earthquake (MCER). This design solution provides an interesting alternative for the design of modern mass timber buildings. The results obtained in the experimental campaign will be used to validate the design methodology and the behavior of the innovative structural system. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, 18th World Conference on Earthquake Engineering (18WCEE))
    To address functional recovery after earthquakes, there is growing interest in developing enhancedperformance seismic-resisting systems. Rocking walls, featuring a base gap-opening mechanism and designed to remain essentially elastic above the base, have demonstrated their potential in various construction materials, including mass timber. If combined with steel energy dissipators, the resulting hybrid steel-mass timber rocking walls have emerged as a promising seismic-resisting system. This study focuses on Post-Tensioned Mass Timber Rocking Walls supplemented with Buckling-Restrained Brace (BRB) boundary elements and builds upon findings from experimental programs funded by the National Science Foundation (NSF) and the United States Department of Agriculture (USDA). The rocking mechanism, controlled by the BRBs and the Post-Tensioned (PT) rods, provides self-centering behaviour, reducing the potential for residual drifts and improving post-earthquake repairability. An estimating method for higher-mode loading profiles is proposed and applied to a six-story archetype, which was tested at the Large High Performance Outdoor Shake Table (LHPOST) at the University of California San Diego (UCSD) in January 2024 as part of the NHERI Converging Design Project. The estimating method is practically formulated to facilitate the implementation in design procedures. 
    more » « less
  4. ; ; ; (, Journal of structural engineering)
    null (Ed.)
    Nonlinear time history analyses were conducted for 5-story and 12-story prototype buildings that used post-tensioned cross-laminated timber rocking walls coupled with U-shaped flexural plates (UFPs) as the lateral force resisting system. The building models were subjected to 22 far-field and 28 near-fault ground motions, with and without directivity effects, scaled to the design earthquake and maximum considered earthquake for Seattle, with ASCE Site Class D. The buildings were designed to performance objectives that limited structural damage to crushing at the wall toes and nonlinear deformation in the UFPs, while ensuring code-based interstory drift requirements were satisfied and the post-tensioned rods remained linear. The walls of the 12-story building had a second rocking joint at midheight to reduce flexural demands in the lower stories and interstory drift in the upper stories. The interstory drift, in-plane wall shear and overturning moment, UFP deformation, and extent of wall toe crushing is summarized for each building. Near-fault ground motions with directivity effects resulted in the largest demands for the 5-story building, while the midheight rocking joint diminished the influence of ground motion directivity effects in the 12-story building. Results for both buildings confirmed that UFPs located higher from the base of the walls dissipated more energy compared to UFPs closer to the base. 
    more » « less
  5. ; ; ; ; ; (, World Conference on Timber Engineering (WCTE 2023))
    Mass timber panels are emerging as an innovative alternative for the design of elastic spines due to their high stiffness- and strength-to-weight ratio, among other factors. Recent research has shown that mass timber panels used in conjunction with steel energy dissipators are promising solutions for enhanced seismic performance. However, the available experimental data at the building scale is still minimal, which limits the understanding, adoption, and development of effective seismic design guidelines for these systems. This research addresses this gap through full-scale quasi-static cyclic testing of a three-story mass timber building. Lateral loads are transferred through Mass Ply Panel (MPP) diaphragms to an MPP spine with vertically-oriented unbonded steel buckling-restrained braces (BRBs) as energy dissipating boundary elements in the first story. The only elements designed to dissipate energy in the inelastic range are the BRBs. The building specimen achieved low-structural damage and enhanced-performance goals, being able to reach a 4% roof drift ratio with little loss of strength and stiffness. The proposed pivoting detail was effective in mitigating compressive damage at the wall toe. To support the experimental campaign and future design procedures, a high-fidelity numerical model of the building was developed using OpenSees. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email