An official website of the United States government
Abstract In the burgeoning field of spintronics, antiferromagnetic materials (AFMs) are attracting significant attention for their potential to enable ultra‐fast, energy‐efficient devices. Thin films of AFMs are particularly promising for practical applications due to their compatibility with spin‐orbit torque (SOT) mechanisms. However, studying these thin films presents challenges, primarily due to the weak signals they produce and the rapid dynamics driven by SOT, that are too fast for conventional electric transport or microwave techniques to capture. The time‐resolved magneto‐optical Kerr effect (TR‐MOKE) has been a successful tool for probing antiferromagnetic dynamics in bulk materials, thanks to its sub‐picosecond (sub‐ps) time resolution. Yet, its application to nanometer‐scale thin films has been limited by the difficulty of detecting weak signals in such small volumes. In this study, the first successful observation of antiferromagnetic dynamics are presented in nanometer‐thick orthoferrite films using the pump‐probe technique to detect TR‐MOKE signal. This paper report an exceptionally low damping constant of 1.5 × 10−4and confirms the AFM magnonic nature of these dynamics through angular‐dependent measurements. Furthermore, it is observed that electrical currents can potentially modulate these dynamics via SOT. The findings lay the groundwork for developing tunable, energy‐efficient spintronic devices, paving the way for advancements in next‐generation spintronic applications.
more »
« less
This content will become publicly available on July 28, 2026
Optimizing time-resolved magneto-optical Kerr effect for high-fidelity magnetic characterization
Spintronics has emerged as a key technology for fast and nonvolatile memory with great CMOS compatibility. As the building blocks for these cutting-edge devices, magnetic materials require precise characterization of their critical properties, such as the effective anisotropy field (Hk,eff, related to magnetic stability) and damping (α, a key factor in device energy efficiency). Accurate measurements of these properties are essential for designing and fabricating high-performance spintronic devices. Among advanced metrology techniques, time-resolved magneto-optical Kerr effect (TR-MOKE) stands out for its superb temporal and spatial resolutions, surpassing traditional methods like ferromagnetic resonance. However, the full potential of TR-MOKE has not yet been fully fledged due to the lack of systematic optimization and robust operational guidelines. In this study, we address this gap by developing experimentally validated guidelines for optimizing TR-MOKE metrology across materials with perpendicular magnetic anisotropy and in-plane magnetic anisotropy. While Co20Fe60B20 thin films are used for experimental validation, this optimization framework can be readily extended to a variety of materials such as L10-FePd with easy-axis dispersion. Our work identifies the optimal ranges of the field angle to simultaneously achieve high signal amplitudes and improve measurement sensitivities to Hk,eff and α. By suppressing the influence of inhomogeneities and boosting sensitivity, our work significantly enhances TR-MOKE capability to extract magnetic properties with high accuracy and reliability. This optimization framework positions TR-MOKE as an indispensable tool for advancing spintronics, paving the way for energy-efficient and high-speed devices that will redefine the landscape of modern computing and memory technologies.
more »
« less
- Award ID(s):
- 2226579
- PAR ID:
- 10632384
- Publisher / Repository:
- AIP Publishing
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 127
- Issue:
- 4
- ISSN:
- 0003-6951
- Page Range / eLocation ID:
- 042405
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This article examines recent advances in the field of antiferromagnetic spintronics from the perspective of potential device realization and applications. We discuss advances in the electrical control of antiferromagnetic order by current-induced spin–orbit torques, particularly in antiferromagnetic thin films interfaced with heavy metals. We also review possible scenarios for using voltage-controlled magnetic anisotropy as a more efficient mechanism to control antiferromagnetic order in thin films with perpendicular magnetic anisotropy. Next, we discuss the problem of electrical detection (i.e., readout) of antiferromagnetic order and highlight recent experimental advances in realizing anomalous Hall and tunneling magnetoresistance effects in thin films and tunnel junctions, respectively, which are based on noncollinear antiferromagnets. Understanding the domain structure and dynamics of antiferromagnetic materials is essential for engineering their properties for applications. For this reason, we then provide an overview of imaging techniques as well as micromagnetic simulation approaches for antiferromagnets. Finally, we present a perspective on potential applications of antiferromagnets for magnetic memory devices, terahertz sources, and detectors.more » « less
-
Molecular spintronics devices (MSDs) attempt to harness molecules’ quantum state, size, and configurable attributes for application in computer devices—a quest that began more than 70 years ago. In the vast number of theoretical studies and limited experimental attempts, MSDs have been found to be suitable for application in memory devices and futuristic quantum computers. MSDs have recently also exhibited intriguing spin photovoltaic-like phenomena, signaling their potential application in cost-effective and novel solar cell technologies. The molecular spintronics field’s major challenge is the lack of mass-fabrication methods producing robust magnetic molecule connections with magnetic electrodes of different anisotropies. Another main challenge is the limitations of conventional theoretical methods for understanding experimental results and designing new devices. Magnetic tunnel junction-based molecular spintronics devices (MTJMSDs) are designed by covalently connecting paramagnetic molecules across an insulating tunneling barrier. The insulating tunneling barrier serves as a mechanical spacer between two ferromagnetic (FM) electrodes of tailorable magnetic anisotropies to allow molecules to undergo many intriguing phenomena. Our experimental studies showed that the paramagnetic molecules could produce strong antiferromagnetic coupling between two FM electrodes, leading to a dramatic large-scale impact on the magnetic electrode itself. Recently, we showed that the Monte Carlo Simulation (MCS) was effective in providing plausible insights into the observation of unusual magnetic domains based on the role of single easy-axis magnetic anisotropy. Here, we experimentally show that the response of a paramagnetic molecule is dramatically different when connected to FM electrodes of different easy-axis anisotropies. Motivated by our experimental studies, here, we report on an MCS study investigating the impact of the simultaneous presence of two easy-axis anisotropies on MTJMSD equilibrium properties. In-plane easy-axis anisotropy produced multiple magnetic phases of opposite spins. The multiple magnetic phases vanished at higher thermal energy, but the MTJMSD still maintained a higher magnetic moment because of anisotropy. The out-of-plane easy-axis anisotropy caused a dominant magnetic phase in the FM electrode rather than multiple magnetic phases. The simultaneous application of equal-magnitude in-plane and out-of-plane easy-axis anisotropies on the same electrode negated the anisotropy effect. Our experimental and MCS study provides insights for designing and understanding new spintronics-based devices.more » « less
-
We report on an all-optical investigation of coupled spin excitation modes in a series of magnetic trilayer structures. Using time-resolved magneto-optic Kerr effect (tr-MOKE) magnetometry, we observe multi-mode coherent spin excitations in [Formula: see text]/Ru/[Formula: see text] multilayers even though the tr-MOKE optical detection is sensitive only to the [Formula: see text] magnetization dynamics. Frequency shifts of the different modes indicate that the coupling between the [Formula: see text] and [Formula: see text] layers varies from anti-ferromagnetic to ferromagnetic to uncoupled as the Ru spacer layer thickness is increased from 8 Å to 200 Å. The lifetime of the high frequency coherent oscillations in the [Formula: see text] layer increases by over 200%–300% even in the case of uncoupled [Formula: see text] and [Formula: see text] layers with a 200 Å thick Ru spacer. The results suggest an additional method to decrease the damping of high-moment alloys in layered magnetic nanostructures.more » « less
-
Abstract This article discusses the current state of development, open research opportunities, and application perspectives of electric‐field‐controlled magnetic tunnel junctions that use the voltage‐controlled magnetic anisotropy effect to control their magnetization. The integration of embedded magnetic random‐access memory (MRAM) into mainstream semiconductor foundry manufacturing opens new possibilities for the development of energy‐efficient, high‐performance, and intelligent computing systems. The current generation of MRAM, which uses the current‐controlled spin‐transfer torque (STT) effect to write information, has gained traction due to its nonvolatile data retention and lower integration cost compared to embedded Flash. However, scaling MRAM to high bit densities will likely require a transition from current‐controlled to voltage‐controlled operation. In this perspective, an overview of voltage‐controlled magnetic anisotropy (VCMA) as a promising beyond‐STT write mechanism for MRAM devices is provided and recent advancements in developing VCMA‐MRAM devices with perpendicular magnetization are highlighted. Starting from the fundamental mechanisms, the key remaining challenges of VCMA‐MRAM, such as increasing the VCMA coefficient, controlling the write error rate, and achieving field‐free VCMA switching are discussed. Then potential solutions are discussed and open research questions are highlighted. Lastly, prospective applications of voltage‐controlled magnetic tunnel junctions (VC‐MTJs) in security applications, extending beyond their traditional role as memory devices are explored.more » « less
