An official website of the United States government
Surface-enhanced Raman spectroscopy (SERS) has great potential as an analytical technique for environmental analyses. In this study, we fabricated highly porous gold (Au) supraparticles ( i.e. , ∼100 μm diameter agglomerates of primary nano-sized particles) and evaluated their applicability as SERS substrates for the sensitive detection of environmental contaminants. Facile supraparticle fabrication was achieved by evaporating a droplet containing an Au and polystyrene (PS) nanoparticle mixture on a superamphiphobic nanofilament substrate. Porous Au supraparticles were obtained through the removal of the PS phase by calcination at 500 °C. The porosity of the Au supraparticles was readily adjusted by varying the volumetric ratios of Au and PS nanoparticles. Six environmental contaminants (malachite green isothiocyanate, rhodamine B, benzenethiol, atrazine, adenine, and gene segment) were successfully adsorbed to the porous Au supraparticles, and their distinct SERS spectra were obtained. The observed linear dependence of the characteristic Raman peak intensity for each environmental contaminant on its aqueous concentration reveals the quantitative SERS detection capability by porous Au supraparticles. The limit of detection (LOD) for the six environmental contaminants ranged from ∼10 nM to ∼10 μM, which depends on analyte affinity to the porous Au supraparticles and analyte intrinsic Raman cross-sections. The porous Au supraparticles enabled multiplex SERS detection and maintained comparable SERS detection sensitivity in wastewater influent. Overall, we envision that the Au supraparticles can potentially serve as practical and sensitive SERS devices for environmental analysis applications.
more »
« less
This content will become publicly available on November 1, 2026
Towards cold-atmospheric plasma jet printed gold nanoparticles on filter paper as a SERS substrate for detection of polystyrene particles in water
Plastic pollution is a major environmental and health threat due to its widespread presence in ecosystems and food chains. Despite extensive research on microplastics, the detection of submicron plastics remains challenging due to their distinct physical and chemical properties and the limitations of current analytical methods. SERS has attracted significant attention in recent research as an ultra-sensitive approach for detecting nanoplastics compared to other spectroscopy techniques. In this paper, a stable, biodegradable, waste-free novel paper-based SERS substrate is developed for the rapid detection of submicron (200 nm) polystyrene (PS) particles via the controlled deposition of AuNPs onto filter paper using an atmospheric cold plasma jet printing process. The density of AuNPs increases with the number of printing passes, correlating with enhanced SERS results. The resulting SERS substrates are capable of quantifying a broad range of PS concentrations (1–500 μg mL⁻¹) using just 5 μL of analyte. The fabricated SERS substrate enables reliable quantification of PS in water, exhibiting a strong linear correlation (R² = 0.993) between SERS intensity and PS concentration, with a detection limit of 10 μg mL⁻¹ . These substrates demonstrate exceptional stability and reproducibility over a 10-week period, addressing key challenges associated with paper-based SERS substrates and making them suitable for long-term monitoring. Furthermore, analysis of tap water as a representative real-world sample demonstrates the practical applicability of the SERS substrate for environmental monitoring, revealing quantifiable levels of PS contamination.
more »
« less
- PAR ID:
- 10632691
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Sensors and Actuators A: Physical
- Volume:
- 394
- Issue:
- C
- ISSN:
- 0924-4247
- Page Range / eLocation ID:
- 116929
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Rapid and cost-effective detection of antibiotics in wastewater and through wastewater treatment processes is an important first step in developing effective strategies for their removal. Surface-enhanced Raman scattering (SERS) has the potential for label-free, real-time sensing of antibiotic contamination in the environment. This study reports the testing of two gold nanostructures as SERS substrates for the label-free detection of quinoline, a small-molecular-weight antibiotic that is commonly found in wastewater. The results showed that the self-assembled SERS substrate was able to quantify quinoline spiked in wastewater with a lower limit of detection (LoD) of 5.01 ppb. The SERStrate (commercially available SERS substrate with gold nanopillars) had a similar sensitivity for quinoline quantification in pure water (LoD of 1.15 ppb) but did not perform well for quinoline quantification in wastewater (LoD of 97.5 ppm) due to interferences from non-target molecules in the wastewater. Models constructed based on machine learning algorithms could improve the separation and identification of quinoline Raman spectra from those of interference molecules to some degree, but the selectivity of SERS intensification was more critical to achieve the identification and quantification of the target analyte. The results of this study are a proof-of-concept for SERS applications in label-free sensing of environmental contaminants. Further research is warranted to transform the concept into a practical technology for environmental monitoring.more » « less
-
Abstract Metal film over nanosphere (FON) substrates are a mainstay of surface‐enhanced Raman scattering (SERS) measurements because they are inexpensive to fabricate, have predictable enhancement factors, and are relatively robust. This work includes a systematic investigation of how the three major FON fabrication parameters—nanosphere size, deposited metal thickness, and metal choice—impact the resulting localized surface plasmon resonance (LSPR). With these three parameters, it is quite simple to fabricate FONs with an optimal LSPR for SERS experiments with various excitation wavelengths. Some SERS experiments require that the substrates be incubated in organic solvents that have the potential to damage the substrate; as such, this work also explores how solvent incubation impacts the physical and optical properties of the FON substrate. Although no significant increase in physical damage is obvious, the LSPR does shift significantly. Finally, these optimized FONs were employed for the sensing of an important allergen, soybean agglutinin. The FONs were modified with a glycopolymer that has affinity for soybean agglutinin and clear Raman bands demonstrate detection of 10 μg/ml soybean agglutinin. Overall, this work serves the dual purpose of both sharing critical details about FON design and demonstrating detection of an important lectin analyte.more » « less
-
This work reports on the development of an analyte sampling strategy on a plasmonic substrate to amplify the detection capability of a dual analytical system, paper spray ionization–mass spectrometry (PSI-MS) and surface-enhanced Raman spectroscopy (SERS). While simply applying only an analyte solution to the plasmonic paper results in a limited degree of SERS enhancement, the introduction of plasmonic gold nanoparticles (AuNPs) greatly improves the SERS signals without sacrificing PSI-MS sensitivity. It is initially revealed that the concentration of AuNPs and the type of analytes highly influence the SERS signals and their variations due to the “coffee ring effect” flow mechanism induced during sampling and the degree of the interfacial interactions (e.g., van der Waals, electrostatic, covalent) between the plasmonic substrate and analyte. Subsequent PSI treatment at high voltage conditions further impacts the overall SERS responses, where the signal sensitivity and homogeneity significantly increase throughout the entire substrate, suggesting the ready migration of adsorbed analytes regardless of their interfacial attractive forces. The PSI-induced notable SERS enhancements are presumably associated with creating unique conditions for local aggregation of the AuNPs to induce effective plasmonic couplings and hot spots (i.e., electromagnetic effect) and for repositioning analytes in close proximity to a plasmonic surface to increase polarizability (i.e., chemical effect). The optimized sampling and PSI conditions are also applicable to multi-analyte analysis by SERS and MS, with greatly enhanced detection capability and signal uniformity.more » « less
-
GenX, the trade name of hexafluoropropylene oxide dimer acid (HFPO-DA) and its ammonium salt, is a short-chain PFAS that has emerged as a substitute for the legacy PFAS perfluorooctanoic acid (PFOA). However, GenX has turned out to be more toxic than people originally thought. In order to monitor and regulate water quality according to recently issued drinking water standards for GenX, rapid and ultrasensitive detection of GenX is urgently needed. For the first time, this study reports ultrasensitive (as low as 1 part per billion (ppb)) and fast detection (in minutes) of GenX in water via surface-enhanced Raman spectroscopy (SERS) using a hierarchical nanofibrous SERS substrate, which was prepared by assembling ~60 nm Ag nanoparticles on electrospun nylon-6 nanofibers through a “hot start” method. The findings in this research highlight the potential of the engineered hierarchical nanofibrous SERS substrate for enhanced detection of short-chain PFASs in water, contributing to the improvement of environmental monitoring and management strategies for PFASs.more » « less
