skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Received Power Maximization Using Nonuniform Discrete Phase Shifts for RISs With a Limited Phase Range
To maximize the received power at a user equipment, the problem of optimizing a reconfigurable intelligent surface (RIS) with a limited phase range and nonuniform discrete phase shifts with adjustable gains is addressed. Necessary and sufficient conditions to achieve this maximization are given. These conditions are employed in two algorithms to achieve the global optimum in linear time. Depending on the phase range limitation, it is shown that the global optimality is achieved in NK or fewer and N(K + 1) or fewer steps, where N is the number of RIS elements and K is the number of discrete phase shifts which may be placed nonuniformly over the limited phase range. In addition, we define two quantization algorithms that we call nonuniform polar quantization (NPQ) algorithm and extended nonuniform polar quantization (ENPQ) algorithm, where the latter is a novel quantization algorithm for RISs with a significant phase range restriction. With NPQ, we provide a closed-form solution for the approximation ratio with which an arbitrary set of nonuniform discrete phase shifts can approximate the continuous solution. We also show that with a phase range limitation, equal separation among the nonuniform discrete phase shifts maximizes the normalized performance. Furthermore, for a larger RIS phase range limitation, we show that the gain of increasing K is only marginal, whereas, ON/OFF selection for the RIS elements can bring significant performance compared to the case when the RIS elements are strictly ON.  more » « less
Award ID(s):
2030029
PAR ID:
10636025
Author(s) / Creator(s):
; ;
Publisher / Repository:
IEEE
Date Published:
Journal Name:
IEEE Open Journal of the Communications Society
Volume:
5
ISSN:
2644-125X
Page Range / eLocation ID:
7447 to 7466
Subject(s) / Keyword(s):
Intelligent reflective surface (IRS), reconfigurable intelligent surface (RIS), nonuniform discrete phase shifts, IRS/RIS phase range, global optimum, linear time discrete beamforming for IRS/RIS, nonuniform quantization.
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, IEEE Open Journal of the Communications Society)
    Gayan_Aruma_Baduge (Ed.)
    The problem of optimizing discrete phases in a reconfigurable intelligent surface (RIS) to maximize the received power at a user equipment is addressed. Necessary and sufficient conditions to achieve this maximization are given. These conditions are employed in an algorithm to achieve the maximization. New versions of the algorithm are given that are proven to achieve convergence in N or fewer steps whether the direct link is completely blocked or not, where N is the number of the RIS elements, whereas previously published results achieve this in KN or 2N number of steps where K is the number of discrete phases. Thus, for a discrete-phase RIS, the techniques presented in this paper achieve the optimum received power in the smallest number of steps published in the literature. In addition, in each of those N steps, the techniques presented in this paper determine only one or a small number of phase shifts with a simple elementwise update rule, which result in a substantial reduction of computation time, as compared to the algorithms in the literature. As a secondary result, we define the uniform polar quantization (UPQ) algorithm which is an intuitive quantization algorithm that can approximate the continuous solution with an approximation ratio of sinc2(1/K) and achieve low time-complexity, given perfect knowledge of the channel. 
    more » « less
  2. ; ; (, Proc. IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (PACRIM))
    In this paper, we investigate a downlink channel of a large intelligent surface (LIS) communication system. The LIS is equipped with B-bit discrete phase shifts while base station (BS) exploits low-resolution digital-to-analog converters (DACs). Without the knowledge of channel state information (CSI) related to the LIS, we propose a practical phase shift design method, whose computational complexity increases by 2 B independent of the number of reflecting elements N. A tight lower bound for the asymptotic rate of the user is obtained in closed form. As N increases, we observe that the asymptotic rate becomes saturated because both the received signal power and the DAC quantization noise increase. Compared to the optimal continuous phase shift design with perfect CSI, our proposed method asymptotically approaches the ideal benchmark performance for moderate to high values of B. The derived results and observations are verified by simulation results. 
    more » « less
  3. ; ; (, 2023 IEEE Radar Conference (RadarConf23))
    Reconfigurable intelligent surface (RIS) technology is a promising approach being considered for future wireless communications due to its ability to control signal propagation with low-cost elements. This paper explores the use of an RIS for clutter mitigation and target detection in radar systems. Unlike conventional reflect-only RIS, which can only adjust the phase of the reflected signal, or active RIS, which can also amplify the reflected signal at the cost of significantly higher complexity, noise, and power consumption, we exploit hybrid RIS that can configure both the phase and modulus of the impinging signal by absorbing part of the signal energy. Such RIS can be considered as a compromise solution between conventional reflect-only and active RIS in terms of complexity, power consumption, and degrees of freedoms (DoFs). We consider two clutter suppression scenarios: with and without knowledge of the target range cell. The RIS design is formulated by minimizing the received clutter echo energy when there is no information regarding the potential target range cell. This turns out to be a convex problem and can be efficiently solved. On the other hand, when target range cell information is available, we maximize the received signal-to-noise-plus-interference ratio (SINR). The resulting non-convex optimization problem is solved through fractional programming algorithms. Numerical results are presented to demonstrate the performance of the proposed hybrid RIS in comparison with conventional RIS in clutter suppression for target detection. 
    more » « less
  4. ; ; ; (, IEEE)
    Due to the simultaneous downlink and uplink transmissions in reconfigurable intelligent surface (RIS)-empowered frequency division duplexing (FDD) communication systems, it is necessary to design the RIS phase shifts to balance the performance of both directions at the same time. Focusing on a single-user multiple-input multiple-output system, we aim to maximize a weighted sum-rate for the downlink and uplink. To address the resulting non-convex optimization problem, we employ an alternating optimization (AO) algorithm, which includes two techniques for optimizing the phase shifts at the RIS. A manifold optimization-based algorithm is applied for the first technique, and a lower-complexity AO approach is developed for the second. Our numerical results demonstrate that the proposed algorithms lead to substantial enhancement of the entire system compared to existing baseline schemes. 
    more » « less
  5. ; ; ; ; ; (, Proc. IEEE Workshop on Signal Processing Advances in Wireless Communications (SPAWC))
    Reconfigurable intelligent surface (RIS) technology has recently emerged as a spectral- and cost-efficient approach for wireless communications systems. However, existing hand-engineered schemes for passive beamforming design and optimization of RIS, such as the alternating optimization (AO) approaches, require a high computational complexity, especially for multiple-input-multiple-output (MIMO) systems. To over-come this challenge, we propose a low-complexity unsupervised learning scheme, referred to as learning-phase-shift neural net-work (LPSNet), to efficiently find the solution to the spectral efficiency maximization problem in RIS-aided MIMO systems. In particular, the proposed LPSNet has an optimized input structure and requires a small number of layers and nodes to produce efficient phase shifts for the RIS. Simulation results for a 16 × 2 MIMO system assisted by an RIS with 40 elements show that the LPSNet achieves 97.25% of the SE provided by the AO counterpart with more than a 95% reduction in complexity. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email