An official website of the United States government
Physical vapor deposition (PVD) provides a route to prepare highly stable and anisotropic organic glasses that are utilized in multi-layer structures such as organic light-emitting devices. While previous work has demonstrated that anisotropic glasses with uniaxial symmetry can be prepared by PVD, here, we prepare biaxially aligned glasses in which molecular orientation has a preferred in-plane direction. With the collective effect of the surface equilibration mechanism and template growth on an aligned substrate, macroscopic biaxial alignment is achieved in depositions as much as 180 K below the clearing point TLC−iso (and 50 K below the glass transition temperature Tg) with single-component disk-like (phenanthroperylene ester) and rod-like (itraconazole) mesogens. The preparation of biaxially aligned organic semiconductors adds a new dimension of structural control for vapor-deposited glasses and may enable polarized emission and in-plane control of charge mobility.
more »
« less
This content will become publicly available on September 28, 2026
High kinetic stability and high density of Ir(ppy)3 doped organic semiconductor glasses
Glasses prepared by physical vapor deposition (PVD) can have advantageous material properties, such as highly enhanced thermal stability and denser molecular packing, and thin glassy films prepared by PVD are utilized as active layers in organic light emitting diodes (OLEDs). However, the stability and density of PVD glasses with compositions typical of OLED devices are not well studied. Here, we prepared Ir(ppy)3 doped vapor-deposited glasses in three different organic semiconductor hosts; Ir(ppy)3 in a dilute concentration is often used as a light emitter in phosphorescent OLEDs. We studied these glasses during temperature ramping using spectroscopic ellipsometry and found that the Ir(ppy)3 doped PVD glasses have high kinetic stability and high density. Surprisingly, the observed kinetic stability exceeds that of single-component PVD glasses. This work allows further understanding of the material properties influencing OLED performance, thus facilitating the design of durable and stable devices.
more »
« less
- Award ID(s):
- 2309000
- PAR ID:
- 10637893
- Publisher / Repository:
- AIP Publishing
- Date Published:
- Journal Name:
- The Journal of Chemical Physics
- Volume:
- 163
- Issue:
- 12
- ISSN:
- 0021-9606
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Glasses prepared by physical vapor deposition (PVD) are anisotropic, and the average molecular orientation can be varied significantly by controlling the deposition conditions. While previous work has characterized the average structure of thick PVD glasses, most experiments are not sensitive to the structure near an underlying substrate or interface. Given the profound influence of the substrate on the growth of crystalline or liquid crystalline materials, an underlying substrate might be expected to substantially alter the structure of a PVD glass, and this near-interface structure is important for the function of organic electronic devices prepared by PVD, such as organic light-emitting diodes. To study molecular packing near buried organic–organic interfaces, we prepare superlattice structures (stacks of 5- or 10-nm layers) of organic semiconductors, Alq3 (Tris-(8-hydroxyquinoline)aluminum) and DSA-Ph (1,4-di-[4-(N,N-diphenyl)amino]styrylbenzene), using PVD. Superlattice structures significantly increase the fraction of the films near buried interfaces, thereby allowing for quantitative characterization of interfacial packing. Remarkably, both X-ray scattering and spectroscopic ellipsometry indicate that the substrate exerts a negligible influence on PVD glass structure. Thus, the surface equilibration mechanism previously advanced for thick films can successfully describe PVD glass structure even within the first monolayer of deposition on an organic substrate.more » « less
-
Abstract Direct deposition of organic light‐emitting diodes (OLEDs) on silicon‐based complementary metal–oxide–semiconductor (CMOS) chips has enabled self‐emissive microdisplays with high resolution and fill‐factor. Emerging applications of OLEDs in augmented and virtual reality (AR/VR) displays and in biomedical applications, e.g., as brain implants for cell‐specific light delivery in optogenetics, require light intensities orders of magnitude above those found in traditional displays. Further requirements often include a microscopic device footprint, a specific shape and ultrastable passivation, e.g., to ensure biocompatibility and minimal invasiveness of OLED‐based implants. In this work, up to 1024 ultrabright, microscopic OLEDs are deposited directly on needle‐shaped CMOS chips. Transmission electron microscopy and energy‐dispersive X‐ray spectroscopy are performed on the foundry‐provided aluminum contact pads of the CMOS chips to guide a systematic optimization of the contacts. Plasma treatment and implementation of silver interlayers lead to ohmic contact conditions and thus facilitate direct vacuum deposition of orange‐ and blue‐emitting OLED stacks leading to micrometer‐sized pixels on the chips. The electronics in each needle allow each pixel to switch individually. The OLED pixels generate a mean optical power density of 0.25 mW mm −2 , corresponding to >40 000 cd m −2 , well above the requirement for daylight AR applications and optogenetic single‐unit activation in the brain.more » « less
-
This study presents the synthesis and characterization of two spirobifluorenyl derivatives substituted with either triphenylmethyl (SB-C) or triphenylsilyl (SB-Si) moieties for use as host materials in phosphorescent organic light-emitting diodes (PHOLED). Both molecules have similar high triplet energies and large energy gaps. Blue Ir(tpz)3 and green Ir(ppy)3 phosphorescent devices were fabricated using these materials as hosts. Surprisingly, SB-Si demonstrated superior charge-transporting ability compared to SB-C, despite having similar energies for their valence orbitals. In particular, SB-Si proved to be a highly effective host for both blue and green devices, resulting in maximum efficiencies of 12.6% for the Ir(tpz)3 device and 9.6% for the Ir(ppy)3 device. These results highlight the benefits of appending the triphenylsilyl moiety onto host materials and underscore the importance of considering the morphology of hosts in the design of efficient PHOLEDs.more » « less
-
We study the structure of vapor-deposited glasses of five common organic semiconductors as a function of substrate temperature during deposition, using synchrotron X-ray scattering. For deposition at a substrate temperature of ∼0.8 T g (where T g is the glass transition temperature), we find a generic tendency towards “face-on” packing in glasses of anisotropic molecules. At higher substrate temperature however this generic behavior breaks down; glasses of rod-shaped molecules exhibit a more pronounced tendency for end-on packing. Our study provides guidelines to create face-on and end-on packing motifs in organic glasses, which can promote efficient charge transport in OLED and OFET devices respectively.more » « less
