skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on October 15, 2026

Title: Ultrafast belite (β‐C 2 S) production using biofuel‐based combustion synthesis
Abstract This study presents a novel low‐temperature, combustion synthesis (CS) approach for the rapid production of belite‐rich cements. CS leverages the exothermic heat released from the combustion of biofuels such as lignin and/or biomass, intermixed with pelletized limestone and quartz. At an imposed furnace temperature of ∼700°C (as opposed to 1200°C–1300°C required in a conventional kiln), the source materials are rapidly transformed to belite, resulting in energy, emissions, and economic benefits. This work explores the influence of various process parameters, viz., fuel types and contents, airflow rate, porosity, holding temperature, and holding time on the efficiency of CS‐based belite synthesis. Through careful optimization of these parameters, including through machine learning‐based methods, >90% belite content is obtained in the synthesized pellets. Advanced analytical tests show that the belite produced from CS closely resembles that obtained from traditional high‐temperature processing. CS has the potential to significantly reduce energy consumption and emissions associated with belite production, and to accelerate the synthesis process by three‐to‐four times as compared to the conventional method.  more » « less
Award ID(s):
2228782
PAR ID:
10643061
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley-Blackwell
Date Published:
Journal Name:
Journal of the American Ceramic Society
ISSN:
0002-7820
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Scientific Reports)
    null (Ed.)
    Abstract Wildfires are a major disturbance to forest carbon (C) balance through both immediate combustion emissions and post-fire ecosystem dynamics. Here we used a process-based biogeochemistry model, the Terrestrial Ecosystem Model (TEM), to simulate C budget in Alaska and Canada during 1986–2016, as impacted by fire disturbances. We extracted the data of difference Normalized Burn Ratio (dNBR) for fires from Landsat TM/ETM imagery and estimated the proportion of vegetation and soil C combustion. We observed that the region was a C source of 2.74 Pg C during the 31-year period. The observed C loss, 57.1 Tg C year −1 , was attributed to fire emissions, overwhelming the net ecosystem production (1.9 Tg C year −1 ) in the region. Our simulated direct emissions for Alaska and Canada are within the range of field measurements and other model estimates. As burn severity increased, combustion emission tended to switch from vegetation origin towards soil origin. When dNBR is below 300, fires increase soil temperature and decrease soil moisture and thus, enhance soil respiration. However, the post-fire soil respiration decreases for moderate or high burn severity. The proportion of post-fire soil emission in total emissions increased with burn severity. Net nitrogen mineralization gradually recovered after fire, enhancing net primary production. Net ecosystem production recovered fast under higher burn severities. The impact of fire disturbance on the C balance of northern ecosystems and the associated uncertainties can be better characterized with long-term, prior-, during- and post-disturbance data across the geospatial spectrum. Our findings suggest that the regional source of carbon to the atmosphere will persist if the observed forest wildfire occurrence and severity continues into the future. 
    more » « less
  2. ; ; ; ; ; (, Advanced Functional Materials)
    Abstract Despite the groundbreaking advancements in the synthesis of inorganic lead halide perovskite (LHP) nanocrystals (NCs), stimulated from their intriguing size‐, composition‐, and morphology‐dependent optical and optoelectronic properties, their formation mechanism through the hot‐injection (HI) synthetic route is not well‐understood. In this work, for the first time, in‐flow HI synthesis of cesium lead iodide (CsPbI3) NCs is introduced and a comprehensive understanding of the interdependent competing reaction parameters controlling the NC morphology (nanocube vs nanoplatelet) and properties is provided. Utilizing the developed flow synthesis strategy, a change in the CsPbI3NC formation mechanism at temperatures higher than 150 °C, resulting in different CsPbI3morphologies is revealed. Through comparison of the flow‐ versus flask‐based synthesis, deficiencies of batch reactors in reproducible and scalable synthesis of CsPbI3NCs with fast formation kinetics are demonstrated. The developed modular flow chemistry route provides a new frontier for high‐temperature studies of solution‐processed LHP NCs and enables their consistent and reliable continuous nanomanufacturing for next‐generation energy technologies. 
    more » « less
  3. ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Lead halide perovskites have recently attracted intensive attention as competitive alternative candidates of legacy compound materials CdTe, CdZnTe, and TlBr for high sensitivity energy‐resolving gamma‐ray detection at room temperature. However, the use of lead in these lead halide perovskites, which is necessary for increasing the stopping power of gamma radiation, poses a serious environmental concern due to the high toxicity of lead. In this regard, environmental‐friendly perovskite‐based gamma‐ray detector materials with key energy‐resolving capabilities are highly desired. Here, the gamma energy‐resolving performance of a new class of all‐inorganic and lead‐free Cs2AgBiBr6double perovskite single crystals (SCs) is reported. Two types of Cs2AgBiBr6SCs, prepared by Bi‐normal and Bi‐poor precursor solutions, respectively, have been grown. Their mobilities and response to gamma radiation are presented. Density of trap states in Bi‐poor Cs2AgBiBr6SCs (2.65 × 109 cm−3) is one order of magnitude lower than that in Bi‐normal Cs2AgBiBr6SCs (3.85 × 1010 cm−3). Using laser‐induced photocurrent measurements, the obtained mobility–lifetime (μ–τ) product in Bi‐poor Cs2AgBiBr6SCs is 1.47 × 10−3 cm2 V−1, indicating their great potentials for gamma‐ray detection. Further, the fabricated detector based on Bi‐poor Cs2AgBiBr6SC shows response to 59.5 keV gamma‐ray with an energy resolution of 13.91%. 
    more » « less
  4. ; ; ; ; ; ; ; (, Small)
    Abstract Cs2SnI6perovskite displays excellent air stability and a high absorption coefficient, promising for photovoltaic and optoelectronic applications. However, Cs2SnI6‐based device performance is still low as a result of lacking optimized synthesis approaches to obtain high quality Cs2SnI6crystals. Here, a new simple method to synthesize single crystalline Cs2SnI6perovskite at a liquid–liquid interface is reported. By controlling solvent conditions and Cs2SnI6supersaturation at the liquid–liquid interface, Cs2SnI6crystals can be obtained from 3D to 2D growth with controlled geometries such as octahedron, pyramid, hexagon, and triangular nanosheets. The formation mechanisms and kinetics of complex shapes/geometries of high quality Cs2SnI6crystals are investigated. Freestanding single crystalline 2D nanosheets can be fabricated as thin as 25 nm, and the lateral size can be controlled up to sub‐millimeter regime. Electronic property of the high quality Cs2SnI62D nanosheets is also characterized, featuring a n‐type conduction with a high carrier mobility of 35 cm2V−1s−1. The interfacial reaction‐controlled synthesis of high‐quality crystals and mechanistic understanding of the crystal growth allow to realize rational design of materials, and the manipulation of crystal growth can be beneficial to achieve desired properties for potential functional applications. 
    more » « less
  5. ; ; ; ; ; (, Geophysical Research Letters)
    Abstract Molecular hydrogen (H2) is an abundant and reactive constituent of Earth's atmosphere, with links to climate and air quality. Anthropogenic emissions of H2are expected to rise as the use of H2as an energy source increases. Documenting past variations in atmospheric H2will help to validate current understanding of the global H2budget. The modern instrumental record begins in the 1980s; there is little information about atmospheric H2prior to that time. Here, we use firn air measurements from a 2001 South Pole campaign to reconstruct atmospheric H2levels over the 20th century. Inversion of the measurements indicates that H2over South Pole has increased from 350–540 ppb from 1910–2000. A biogeochemical box model indicates that the atmospheric burden of H2increased by 37% over that time. The rise in H2is consistent with increasing H2emissions from fossil fuel combustion and increasing atmospheric production from methane oxidation. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email