An official website of the United States government
Abstract Crystalline basement rocks of southwestern Montana have been subjected to multiple tectonothermal events since ∼3.3 Ga: the Paleoproterozoic Big Sky/Great Falls orogeny, Mesoproterozoic extension associated with Belt‐Purcell basin formation, Neoproterozoic extension related to Rodinia rifting, and the late Phanerozoic Sevier‐Laramide orogeny. We investigated the long‐term (>1 Ga), low‐temperature (erosion/burial within 10 km of the surface) thermal histories of these tectonic events with zircon and apatite (U‐Th)/He thermochronology. Data were collected across nine sample localities (n = 55 zircon andn = 26 apatite aliquots) in the northern and southern Madison ranges, the Blacktail‐Snowcrest arch, and the Tobacco Root uplift. Our zircon (U‐Th)/He data show negative trends between single aliquot date and effective uranium (a radiation damage proxy), which we interpreted with a thermal history model that considers the damage‐He diffusivity relationship in zircon. Our model results for these basement ranges show substantial cooling from temperatures above 400°C to near surface conditions between 800 and 510 Ma. Subsequent Phanerozoic exhumation culminated by ∼75 Ma. Late Phanerozoic cooling is coincident with along‐strike Sevier belt thin‐skinned thrusting in southeastern Idaho, and older than exhumation in basement‐involved uplifts of the Wyoming Laramide province. Our long‐term, low‐temperature thermal record for these southwestern Montana basement ranges shows that: (a) these basement blocks have experienced multiple episodes of upper crustal exhumation and burial since Archean time, possibly influencing Phanerozoic thrust architecture and (b) the late Phanerozoic thick‐skinned thrusting recorded by these rocks is among the earliest thermochronologic records of Laramide basement‐involved shortening and was concomitant with Sevier belt thin‐skinned thrusting.
more »
« less
Regional Thermal History Trends From the Idaho‐Montana Fold‐Thrust Belt Using Multiple Low‐T Thermochronometers
Abstract Low‐temperature thermochronometric data can reveal the long‐term evolution of erosion, uplift, and thrusting in fold‐thrust belts. We present results from central Idaho and southwestern Montana, where the close spatial overlap of the Sevier fold‐thrust belt and Laramide style, basement‐involved foreland uplifts signify a complex region with an unresolved, long‐term tectono‐thermal history. Inverse QTQt thermal history modeling of new zircon (U‐Th)/He (ZHe,n = 106), and apatite (U‐Th)/He dates (AHe,n = 43) collected from hanging walls of major thrusts systems along a central Idaho to southwestern Montana transect, and apatite fission track results from 6 basement samples, reveal regional thermal and spatial trends related to Sevier and Laramide orogenesis. Inverse modeling of foreland basement uplift samples suggest Phanerozoic exhumation initiated as early as ∼80 Ma and continued through the early Paleogene. Inverse modeling of interior Idaho fold‐thrust belt ZHe samples documents Early Cretaceous cooling at ∼125 Ma in the Lost River Range (western transect), and a younger cooling episode in the Lemhi Arch region (mid‐transect) at ∼90–80 Ma through the late Paleogene. This cooling in the Lemhi Arch temporally overlaps with cooling in southwestern Montana's basement‐cored uplifts, which we interpret as roughly synchronous exhumation related to contractional tectonics and post‐orogenic collapse. These data and models, integrated with independent timing constraints from foreland basin strata and previously published thermochronometric results, suggests that middle Cretaceous deformation of southwestern Montana's basement‐cored uplifts was low magnitude and preceded tectonism along the classic Arizona‐Wyoming Laramide “corridor.” In contrast, Late Cretaceous and Paleogene thrust‐related exhumation was more significant and largely complete by the Eocene. The basement‐involved deformation was contemporaneous with and younger than along‐strike Sevier belt thrusting in central Idaho.
more »
« less
- PAR ID:
- 10644730
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Tectonics
- Volume:
- 44
- Issue:
- 5
- ISSN:
- 0278-7407
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The Laramide province is characterized by foreland basin partitioning through the growth of basement arches. Although variable along the western U.S. margin, the general consensus is initiation of this structural style by the early Campanian (~80 Ma). This has been linked to flat‐slab subduction beneath western North America, but the extent and cause for a flat slab remain debated, invoking the need for better constraints on the regional variations in timing of Laramide deformation. We present new conglomerate clast composition, sandstone petrographic, and detrital zircon U‐Pb geochronologic data from the Upper Cretaceous Beaverhead Group in southwestern Montana that suggest a pre‐Campanian history of basement‐involved deformation. During the early stages of deposition (~88–83 Ma), two separate depositional systems derived sediment from the Lemhi subbasin and distal thrust sheets to the west as well as Paleozoic strata eroding off the exhuming Blacktail‐Snowcrest arch to the east. Our data provide the first conclusive evidence for the longitudinal transport of gravel via Cordilleran paleorivers connecting sediment sources in east central Idaho to depocenters in southwestern Montana and northwestern Wyoming. Furthermore, erosion of Paleozoic strata by this time requires that the Blacktail‐Snowcrest arch was exhuming prior to ~88 Ma in order to remove the Mesozoic overburden. Later (~73–66 Ma) sediment flux was entirely from the foreland‐propagating fold‐thrust belt to the west. These results suggest that Laramide‐style deformation in southwestern Montana preceded initiation elsewhere along the margin, requiring revision of existing models for Laramide tectonism.more » « less
-
Western North America is the archetypical Cordilleran orogenic system that preserves a Mesozoic to Cenozoic record of oceanic Farallon plate subduction-related processes. After prolonged Late Jurassic through mid-Cretaceous normal-angle Farallon plate subduction that produced the western North American batholith belt and retroarc fold-thrust belt, a period of low-angle, flat-slab subduction during Late Cretaceous−Paleogene time caused upper plate deformation to migrate eastward in the form of the Laramide basement-involved uplifts, which partitioned the original regional foreland basin. Major questions persist about the mechanism and timing of flat-slab subduction, the trajectory of the flat-slab, inter-plate coupling mechanism(s), and the upper-plate deformational response to such processes. Critical for testing various flat-slab hypotheses are the timing, rate, and distribution of exhumation experienced by the Laramide uplifts as recorded by low-temperature thermochronology. In this contribution, we address the timing of regional exhumation of the Laramide uplifts by combining apatite fission-track (AFT) and (U-Th-Sm)/He (AHe) data from 29 new samples with 564 previously published AFT, AHe, and zircon (U-Th)/He ages from Laramide structures in Arizona, Utah, Wyoming, Colorado, Montana, and South Dakota, USA. We integrate our results with existing geological constraints and with new regional cross sections to reconstruct the spatial and temporal history of exhumation driven by Laramide deformation from the mid-Cretaceous to Paleogene. Our analysis suggests a two-stage exhumation of the Laramide province, with an early phase of localized exhumation occurring at ca. 100−80 Ma in Wyoming and Montana, followed by a more regional period of exhumation at ca. 70−50 Ma. Generally, the onset of enhanced exhumation occurs earlier in the northern Laramide province (ca. 90 Ma) and later in the southern Laramide province (ca. 80 Ma). Thermal history models of selected samples along regional cross sections through Utah−Arizona−New Mexico and Wyoming−South Dakota show that exhumation occurred contemporaneously with deformation, implying that Laramide basement block exhumation is coupled with regional deformation. These results have implications for testing proposed migration pathway models of Farallon flat-slab and for how upper-plate deformation is expressed in flat-slab subduction zones in general.more » « less
-
Abstract Continental fold‐thrust belts display a variety of structural styles, ranging from thin‐skinned thrusts following weak lithologic contacts to thick‐skinned thrusts that deform mechanical basement. The common practice of splitting fold‐thrust belts into thin‐skinned and thick‐skinned map domains has not yielded a predictive model of the primary controls on structural style. Within the Mesozoic‐Paleogene Idaho‐Montana fold‐thrust belt (44°N‐45°N, 112°W‐114°W), we identify crosscutting thin‐skinned and thick‐skinned thrusts within an otherwise thin‐skinned map domain. This transition occurs within a thin (∼2.5 km) portion of the western Laurentian passive margin, where lower strata pinch out over a prominent basement high (Lemhi arch). Early fold‐thrust belt shortening of sedimentary cover rocks was accommodated through detachment folding, followed by east‐directed, thin‐skinned thrusting along regional‐scale faults (Thompson Gulch and Railroad Canyon thrusts). Later, basement and cover rocks were tilted toward the southeast and a basement‐involved normal fault was reactivated during thick‐skinned thrusting (Radio Tower‐Baby Joe Gulch‐Italian Gulch thrusts), which accommodated shortening at an oblique angle to and truncated the basal detachment of the older thin‐skinned thrusts. This progression from thin‐skinned to thick‐skinned thrusting occurred >50 km from the foreland, coincident with a regional basement high. Thus, the Idaho‐Montana fold‐thrust belt is a double‐decker system, with upper thin‐skinned and lower thick‐skinned domains. This double‐decker model is applicable to other fold‐thrust belts and predicts that the transition from thin‐skinned to thick‐skinned thrusting occurs where the growing critically tapered wedge can no longer fit within the sedimentary cover rocks and the basal detachment steps down into the structurally lower mechanical basement.more » « less
-
Abstract The Andes of western Argentina record spatiotemporal variations in morphology, basin geometry, and structural style that correspond with changes in crustal inheritance and convergent margin dynamics. Above the modern Pampean flat‐slab subduction segment (27–33°S), retroarc shortening generated a fold‐thrust belt and intraforeland basement uplifts that converge north of ∼29°S, providing opportunities to explore the effects of varied deformation and subduction regimes on synorogenic sedimentation. We integrate new detrital zircon U‐Pb and apatite (U‐Th)/He analyses with sequentially restored, flexurally balanced cross sections and thermokinematic models at ∼28.5–30°S to link deformation with resulting uplift, erosion, and basin accumulation histories. Tectonic subsidence, topographic evolution, and thermochronometric cooling records point to (a) shortening and distal foreland basin accumulation at ∼18–16 Ma, (b) thrust belt migration, changes in sediment provenance, and enhanced flexural subsidence from ∼16 to 9 Ma, (c) intraforeland basement deformation, local flexure, and drainage reorganization at ∼12–7 Ma, and (d) out‐of‐sequence shortening and exhumation of foreland basin fill by ∼8–2 Ma. Thrust belt kinematics and the reactivation of basement heterogeneities strongly controlled tectonic load configurations and subsidence patterns. Geo/thermochronological data and model results resolve increased shortening and combined thrust belt and intraforeland basement loading in response to ridge collision and Neogene shallowing of the subducted oceanic slab. Finally, this study demonstrates the utility of integrated flexural thermokinematic and erosion modeling for evaluating the geometries, rates, and potential drivers of retroarc deformation and foreland basin evolution during changes in subduction.more » « less
