skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Embedded bioprinting of dense cellular constructs in bone allograft-enhanced hydrogel matrices for bone tissue engineering

This content will become publicly available on June 10, 2026

Title: Embedded bioprinting of dense cellular constructs in bone allograft-enhanced hydrogel matrices for bone tissue engineering
We present an extrusion-based embedded bioprinting strategy to fabricate dense cellular constructs within bioactive MeHA hydrogels containing human bone microparticles, providing a scalable platform for bone tissue engineering.  more » « less
Award ID(s):
2044479
PAR ID:
10657673
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Biomaterials Science
Volume:
13
Issue:
12
ISSN:
2047-4830
Page Range / eLocation ID:
3213 to 3222
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Journal of Tissue Engineering and Regenerative Medicine)
    Stabler, Cherie L. (Ed.)
    The unavailability of reliable models for studying breast cancer bone metastasis is the major challenge associated with poor prognosis in advanced-stage breast cancer patients. Breast cancer cells tend to preferentially disseminate to bone and colonize within the remodeling bone to cause bone metastasis. To improve the outcome of patients with breast cancer bone metastasis, we have previously developed a 3D in vitro breast cancer bone metastasis model using human mesenchymal stem cells (hMSCs) and primary breast cancer cell lines (MCF-7 and MDAMB231), recapitulating late-stage of breast cancer metastasis to bone. In the present study, we have tested our model using hMSCs and patient-derived breast cancer cell lines (NT013 and NT023) exhibiting different characteristics. We investigated the effect of breast cancer metastasis on bone growth using this 3D in vitro model and compared our results with previous studies. The results showed that NT013 and NT023 cells exhibiting hormone-positive and triple-negative characteristics underwent mesenchymal to epithelial transition (MET) and formed tumors in the presence of bone microenvironment, in line with our previous results with MCF-7 and MDAMB231 cell lines. In addition, the results showed upregulation of Wnt-related genes in hMSCs, cultured in the presence of excessive ET-1 cytokine released by NT013 cells, while downregulation of Wnt-related genes in the presence of excessive DKK-1, released by NT023 cells, leading to stimulation and abrogation of the osteogenic pathway, respectively, ultimately mimicking different types of bone lesions in breast cancer patients. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; (, Journal of Anatomy)
    Abstract Ancestors of the Antarctic icefishes (family Channichthyidae) were benthic and had no swim bladder, making it energetically expensive to rise from the ocean floor. To exploit the water column, benthopelagic icefishes were hypothesized to have evolved a skeleton with “reduced bone,” which gross anatomical data supported. Here, we tested the hypothesis that changes to icefish bones also occurred below the level of gross anatomy. Histology and micro‐CT imaging of representative craniofacial bones (i.e., ceratohyal, frontal, dentary, and articular) of extant Antarctic fish species specifically evaluated two features that might cause the appearance of “reduced bone”: bone microstructure (e.g., bone volume fraction and structure linear density) and bone mineral density (BMD, or mass of mineral per volume of bone). Measures of bone microstructure were not consistently different in bones from the icefishesChaenocephalus aceratusandChampsocephalus gunnari, compared to the related benthic notothenioidsNotothenia coriicepsandGobionotothen gibberifrons. Some quantitative measures, such as bone volume fraction and structure linear density, were significantly increased in some icefish bones compared to homologous bones of non‐icefish. However, such differences were rare, and no microstructural measures were consistently different in icefishes across all bones and species analyzed. Furthermore, BMD was similar among homologous bones of icefish and non‐icefish Antarctic notothenioids. In summary, “reduced bone” in icefishes was not due to systemic changes in bone microstructure or BMD, raising the prospect that “reduced bone” in icefish occurs only at the gross anatomic level (i.e., smaller or fewer bones). Given that icefishes exhibit delayed skeletal development compared to non‐icefish Antarctic fishes, combining these phenotypic data with genomic data might clarify genetic changes driving skeletal heterochrony. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Bone and Mineral Research)
    ABSTRACT The gut microbiome impacts bone mass, which implies a disruption to bone homeostasis. However, it is not yet clear how the gut microbiome affects the regulation of bone mass and bone quality. We hypothesized that germ‐free (GF) mice have increased bone mass and decreased bone toughness compared with conventionally housed mice. We tested this hypothesis using adult (20‐ to 21‐week‐old) C57BL/6J GF and conventionally raised female and male mice (n = 6–10/group). Trabecular microarchitecture and cortical geometry were measured from micro–CT of the femur distal metaphysis and cortical midshaft. Whole‐femur strength and estimated material properties were measured using three‐point bending and notched fracture toughness. Bone matrix properties were measured for the cortical femur by quantitative back‐scattered electron imaging and nanoindentation, and, for the humerus, by Raman spectroscopy and fluorescent advanced glycation end product (fAGE) assay. Shifts in cortical tissue metabolism were measured from the contralateral humerus. GF mice had reduced bone resorption, increased trabecular bone microarchitecture, increased tissue strength and decreased whole‐bone strength that was not explained by differences in bone size, increased tissue mineralization and fAGEs, and altered collagen structure that did not decrease fracture toughness. We observed several sex differences in GF mice, most notably for bone tissue metabolism. Male GF mice had a greater signature of amino acid metabolism, and female GF mice had a greater signature of lipid metabolism, exceeding the metabolic sex differences of the conventional mice. Together, these data demonstrate that the GF state in C57BL/6J mice alters bone mass and matrix properties but does not decrease bone fracture resistance. © 2023 The Authors.Journal of Bone and Mineral Researchpublished by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR). 
    more » « less
  4. ; (, Bioengineering)
    Janorkar, Amol V; Vozzi, Giovanni (Ed.)
    The patient-specific treatment of bone fractures using porous osteoconductive scaffolds has faced significant clinical challenges due to insufficient mechanical strength and bioactivity. These properties are essential for osteogenesis, bone bridging, and bone regeneration. Therefore, it is crucial to develop and characterize biocompatible, biodegradable, and mechanically robust scaffolds for effective bone regeneration. The objective of this study is to systematically investigate the mechanical performance of SimuBone, a medical-grade biocompatible and biodegradable material, using 10 distinct triply periodic minimal surface (TPMS) designs with various internal structures. To assess the material’s tensile properties, tensile structures based on ASTM D638-14 (Design IV) were fabricated, while standard torsion structures were designed and fabricated to evaluate torsional properties. Additionally, this work examined the compressive properties of the 10 TPMS scaffold designs, parametrically designed in the Rhinoceros 3D environment and subsequently fabricated using fused deposition modeling (FDM) additive manufacturing. The FDM fabrication process utilized a microcapillary nozzle (heated to 240 °C) with a diameter of 400 µm and a print speed of 10 mm/s, depositing material on a heated surface maintained at 60 °C. It was observed that SimuBone had a shear modulus of 714.79 ± 11.97 MPa as well as an average yield strength of 44 ± 1.31 MPa. Scaffolds fabricated with horizontal material deposition exhibited the highest tensile modulus (5404.20 ± 192.30 MPa), making them ideal for load-bearing applications. Also, scaffolds with large voids required thicker walls to prevent collapse. The P.W. Hybrid scaffold design demonstrated high vertical stiffness but moderate horizontal stiffness, indicating anisotropic mechanical behavior. The Neovius scaffold design balanced mechanical stiffness and porosity, making it a promising candidate for bone tissue engineering. Overall, the outcomes of this study pave the way for the design and fabrication of scaffolds with optimal properties for the treatment of bone fractures. 
    more » « less
  5. ; ; ; (, Biomedical Optics Express)
    Bone is a unique biological composite material made up of a highly structured collagen mesh matrix and mineral deposits. Although mineral provides stiffness, collagen’s secondary organization provides a critical role in bone elasticity. Here, we performed polarimetric analysis of bone collagen fibers using second harmonic generation (SHG) imaging to evaluate lamella sheets and collagen fiber integrity in intact cranial bone. Our polarimetric data was fitted to a model accounting for diattenuation, polarization cross-talk, and birefringence. We compared our data to the fitted model and found no significant difference between our polarimetric observation and the representation of these scattering properties up to 70µm deep. We also observed a loss of resolution as we imaged up to 70µm deep into bone but a conservation of polarimetric response. Polarimetric SHG allows for the discrimination of collagen lamellar sheet structures in intact bone. Our work could allow for label-free identification of disease states and monitor the efficacy of therapies for bone disorders. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email