An official website of the United States government
Rubbers reinforced with rigid particles are used in high-volume applications, including tyres, dampers, belts and hoses1. Many applications require high modulus to resist excessive deformation and high fatigue threshold to resist crack growth under cyclic load. The particles are known to greatly increase modulus but not fatigue threshold. For example, adding carbon particles to natural rubber increases its modulus by one to two orders of magnitude1,2,3, but its fatigue threshold, reinforced or not, has remained approximately 100 J m−2 for decades4,5,6,7. Here we amplify the fatigue threshold of particle-reinforced rubbers by multiscale stress deconcentration. We synthesize a rubber in which highly entangled long polymers strongly adhere with rigid particles. At a crack tip, stress deconcentrates across two length scales: first through polymers and then through particles. This rubber achieves a fatigue threshold of approximately 1,000 J m−2. Mounts and grippers made of this rubber bear high loads and resist crack growth over repeated operation. Multiscale stress deconcentration expands the space of materials properties, opening doors to curtailing polymer pollution and building high-performance soft machines.
more »
« less
Molecular simulation of subcritical crack growth under dry conditions in a model brittle glass
Subcritical crack growth can occur under a constant applied load below the threshold value for catastrophic failure, also known as static fatigue. Here, we report how a crack grows under a combination of stress-intensity factor (K) and temperature in a model brittle glass using molecular dynamics simulations. The model glass is under dry conditions, thus avoiding the complexity of corrosion chemistry. The crack growth rate is shown to be inconsistent with the commonly used subcritical crack growth model rooted in the transition state theory (TST), in which the applied stress-intensity factor reduces the transition barrier. A new subcritical crack growth model is proposed with a constant barrier and a K-dependent prefactor in TST, representing the size of the region for potential bond breaking. The thermomechanical condition for subcritical crack growth is also mapped in the K-T domain, in between elastic deformation and catastrophic fracture regimes. Finally, we show substantial crack self-healing once the applied load is removed, under the thermodynamic driving force of surface energy reduction. Our findings provide new insights into the mechanochemical coupling during static fatigue and call for experimental investigation of whether the activation energy is K-dependent.
more »
« less
- Award ID(s):
- 2015557
- PAR ID:
- 10657727
- Publisher / Repository:
- AIP
- Date Published:
- Journal Name:
- Journal of Applied Physics
- Volume:
- 138
- Issue:
- 9
- ISSN:
- 0021-8979
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Polyurethane (PU) elastomers are among the most used rubberlike materials due to their combined merits, including high abrasion resistance, excellent mechanical properties, biocompatibility, and good processing performance. A PU elastomer exhibits pronounced hysteresis, leading to a high toughness on the order of 104 J/m2. However, toughness gained from hysteresis is ineffective to resist crack growth under cyclic load, causing a fatigue threshold below 100 J/m2. Here we report a fatigue-resistant PU fiber–matrix composite, using commercially available Spandex as the fibers and PU elastomer as the matrix. The Spandex fibers are stiff, strong, and stretchable. The matrix is soft, tough, and stretchable. We describe a pullout test to measure the adhesion toughness between the fiber and matrix. The test is highly reproducible, showing an adhesion toughness of 3170 J/m2. The composite shows a maximum stretchability of 6.0, a toughness of 16.7 kJ/m2, and a fatigue threshold of 3900 J/m2. When a composite with a precut crack is stretched, the soft matrix causes the crack tip to blunt greatly, which distributes high stress over a long segment of the Spandex fiber ahead the crack tip. This deconcentration of stress makes the composite resist the growth of cracks under monotonic and cyclic loads. The PU elastomer composites open doors for realistic applications of fatigue-resistant elastomersmore » « less
-
A sensor for visualizing the fatigue load cycles was designed, fabricated, and tested. The sensor is made of a glass/carbon hybrid composite and utilizes the delamination length at the glass/carbon interface as an indicator for fatigue cycles. Appropriate design parameters were obtained by performing finite element analysis on the delamination development at the interface between the glass and carbon layers. Hybrid sensors with different carbon layer thicknesses were manufactured, attached to glass/epoxy substrates, and tested under fatigue loading. The predicted results based on the Paris law for crack extensions in one configuration are compared with the experiments for a different configuration to illustrate the efficacy of the approach.more » « less
-
ABSTRACT This study utilizes linear elastic fracture mechanics to assess the fatigue criticality of volumetric defects in notched specimens with varying geometries. Contrasting to the existing literature, this study assesses the fatigue criticality of defects, prior to fracture, via a non‐destructive inspection technique, that is, X‐ray computed tomography (XCT). Treating volumetric defects as cracks, based on Murakami's definition, the approach calculates their Mode‐I stress intensity factor (SIF) with their local stresses obtained via linear elastic finite element analysis and utilizes the SIF to represent their criticality. For validation, cylindrical and flat specimens with notch root radii of 5 and 50 mm of AlSi10Mg and 17‐4 precipitation hardened stainless steel were fabricated, XCT scanned, and tested under fatigue loading. All crack initiating defects, observed from fractography, fell within the 99.3 percentile of the defects with the highest stress intensity factor in the respective specimens.more » « less
-
ABSTRACT: Tire failures, such as tread separation and sidewall zipper fracture, occur when internal flaws (cracks) nucleate and grow to a critical size as result of fatigue or cyclic loading. Sudden and catastrophic rupture takes place at this critical crack size because the strain energy release rate exceeds the tear energy of the rubber in the tire. The above-mentioned tire failures can lead to loss of vehicle stability and control, and it is important to develop predictive models and computational tools that address this problem. The objective of this article was to develop a cohesive zone model for rubber to numerically predict crack growth in a rubber component under dynamic tearing. The cohesive zone model for rubber was embedded into the material constitutive equation via a user-defined material subroutine (VUMAT) of ABAQUS. It consisted of three parts: (1) hyperviscoelastic behavior before damage, (2) damage initiation based on the critical strain energy density, and (3) hyperviscoelastic behavior after damage initiation. Crack growth in the tensile strip and pure shear specimens was simulated in ABAQUS Explicit, and good agreement was reported between finite element analysis predictions and test resultsmore » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1063/5.0285814
