skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Visualization of fatigue load cycle numbers using a glass/carbon hybrid composite sensor
A sensor for visualizing the fatigue load cycles was designed, fabricated, and tested. The sensor is made of a glass/carbon hybrid composite and utilizes the delamination length at the glass/carbon interface as an indicator for fatigue cycles. Appropriate design parameters were obtained by performing finite element analysis on the delamination development at the interface between the glass and carbon layers. Hybrid sensors with different carbon layer thicknesses were manufactured, attached to glass/epoxy substrates, and tested under fatigue loading. The predicted results based on the Paris law for crack extensions in one configuration are compared with the experiments for a different configuration to illustrate the efficacy of the approach.  more » « less
Award ID(s):
2243755
PAR ID:
10523149
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Sensors and Actuators A: Physical
Volume:
376
Issue:
C
ISSN:
0924-4247
Page Range / eLocation ID:
115551
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Nanomaterials)
    null (Ed.)
    In this investigation, multi-walled carbon nanotubes (MWCNTs) were grown over carbon fiber fabrics via a relatively nondestructive synthesis technique. The MWCNTs patches were grown into three different topologies: uniform, fine patterned and coarse patterned. Hybrid carbon fiber-reinforced polymer composites (CFRPs) were fabricated based on the patterned reinforcements. Tensile tests, dynamic mechanical thermal analyses (DMTA) and flexure load relaxation tests were carried out to investigate the effect of the patterned nano-reinforcement on the static, dynamic, glass transition, and viscoelastic performance of the hybrid composites. Results revealed that the hybrid composite based on fine-patterned topology achieved better performance over all other configurations as it exhibited about 19% improvement in both the strength and modulus over the reference composite with no MWCNTs. Additionally, the increase in glass transition for this composite was as high as 13%. The damping parameter (tan δ) was improved by 46%. The stress relaxation results underlined the importance of patterned MWCNTs in minimizing the stress decay at elevated temperatures and loading conditions. Utilizing patterned MWCNTs topology significantly reduced the stress decay percentage at the thermomechanical conditions 60 MPa and 75 °C from 16.7% to 7.8%. These improvements are attributed to both the enhanced adhesion and large interface area by placing MWCNTs and by inducing an interlocking mechanism that allows the interaction of the three constituents in load transfer, crack deflection and hindering undesired viscoelastic deformations under different thermomechanical loadings. 
    more » « less
  2. ; ; ; ; ; (, Journal of Composite Materials)
    Sheet Molding Compound (SMC) is a widely used composite material, particularly in automotive applications, due to its cost-effectiveness, lightweight properties, and adaptability for complex shapes. While E-glass is commonly used as reinforcement in SMC, its strength and stiffness are limited compared to carbon fiber (CF). Previous research has focused on continuous-discontinuous SMC hybrids, combining continuous CF with glass fiber substrates, but these approaches are costly and complex to manufacture. This study explores a novel discontinuous-discontinuous hybrid SMC that combines E-glass SMC (G-SMC) with recycled carbon fiber (rCF) mats, aiming to enhance mechanical properties without a significant cost increase. Two materials were produced, one with and one without rCF, and were tested for flexural, tensile, interlaminar shear, and impact properties. Failure mechanisms were also examined through digital imaging. This approach demonstrates the potential for a cost-effective and practical SMC hybrid suitable for commercial applications in the automotive industry. 
    more » « less
  3. ; (, Journal of Composites Science)
    Glass-reinforced composite columns (GRCCs) may provide an economical alternative to conventional construction materials due to the superior cost to strength provided by bulk glass. Prior to this study, no GRCCs had been physically tested, having previously relied on simulation to predict the behavior of the columns. This study utilizes polyurethane resin bonds in place of sizing agents for adherence between materials, a key requirement for the development of the structural system of the columns. The unreinforced control column failed at a load of 11.2 kN while the maximum GRCC load was 30.8 kN. This indicates that glass can be loaded to 123 MPa before the onset of delamination failure of the GRCCs. Maximum shear stress of 53 MPa was reached, exceeding the 11 MPa required for practical GRCCs. Buckling of the columns occurred at 30.8 kN, below the theoretical maximum of 64.4 kN. Through gradual delamination, the column slowly transferred to an unbonded condition, causing buckling failure. Delamination is unlikely to occur in practical GRCCs due to the lower required shear strengths. 
    more » « less
  4. ; ; ; ; ; ; ; (, Advanced Materials Technologies)
    Abstract Human–machine interface requires various sensors for communication, manufacturing and environmental control, and health and safety monitoring. Capacitive sensors have been used to detect touch, distance, geometry, electric property, and environmental parameters. However, highly sensitive proximity detection with a small form factor has always been a challenge. This paper presents a capacitive sensor composed of a nanostructured electrode array for contact and noncontact detection. In the sensor configuration, the nanostructured electrode is made of high aspect ratio cellulose fibers embedded with carbon nanotubes. The complementary electrode is designed to be smaller in surface area for high sensitivity. Based on the analysis, the unique sensing mechanism is shown to enhance the proximity sensitivity for target detection. A pair of asymmetrically designed electrodes are characterized and compared with the traditional symmetric electrodes for proximity and contact detection of human hands. The sensor performance is also characterized for detecting water mass in glass and metal cups. In the end, a smart pad that can recognize human gestures, gait, and water mass with unprecedented sensitivity is demonstrated. 
    more » « less
  5. ; ; ; ; ; (, Frontiers in Materials)
    The utilization of multifunctional composite materials presents significant advantages in terms of system efficiency, cost-effectiveness, and miniaturization, making them highly valuable for a wide range of industrial applications. One approach to harness the multifunctionality of carbon fiber reinforced polymer (CFRP) is to integrate it with a secondary material to form a hybrid composite. In our previous research, we explored the use of carbonaceous material derived from coconut shells as a sustainable alternative to inorganic fillers, aiming to enhance the out-of-plane mechanical performance of CFRP. In this study, our focus is to investigate the influence of carbonized coconut shell particles on the non-structural properties of CFRP, specifically electromagnetic interference (EMI) shielding, thermal stability, and water absorption resistance. The carbonized material was prepared by thermal processing at 400 °C. Varying proportions of carbonized material, ranging from 1% to 5% by weight, were thoroughly mixed with epoxy resin to form the matrix used for impregnating woven carbon fabric with a volume fraction of 29%. Through measurements of scattering parameters, we found that the hybrid composites with particle loadings up to 3% exhibited EMI shielding effectiveness suitable for industrial applications. Also, incorporating low concentrations of carbonized particle to CFRP enhances the thermal stability of hybrid CFRP composites. However, the inclusion of carbonized particle to CFRP has a complex effect on the glass transition temperature. Even so, the hybrid composite with 2% particle loading exhibits the highest glass transition temperature and lowest damping factor among the tested variations. Furthermore, when subjected to a 7-day water immersion test, hybrid composites with 3% or less amount of carbonized particle showed the least water absorption. The favorable outcome can be attributed to good interfacial bonding at the matrix/fiber interface. Conversely, at higher particle concentrations, aggregation of particles and formation of interfacial and internal pores was observed, ultimately resulting in deteriorated measured properties. The improved non-structural functionalities observed in these biocomposites suggest the potential for a more sustainable and cost-effective alternative to their inorganic-based counterparts. This advancement in multifunctional composites could pave the way for enhanced applications of biocomposites in various industries. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email