skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Energy and Exergy Analyses of Power Generation Cycles Using Powdered Iron as a Fuel Source
Abstract As the effects of climate change become a greater threat, the need for a viable source of sustainable energy grows daily. Iron powder has been proposed as a potential alternative to conventional fossil fuels. Pulverized iron can be burned similarly to coal. Unlike coal, however, iron combustion does not create CO2 as a by-product. It also produces a negligible amount of NOx. Iron is also abundant in the Earth's crust, has a low explosion range, possesses a competitive energy density to hydrocarbons, and reacts well with oxygen. Finally, the iron oxide produced during combustion can be collected and reduced back to iron, creating a fully sustainable process. In this analysis, different power generation cycles were analyzed to maximize the energy and exergy efficiencies as well as the work output per unit mass of iron. It was found that the power cycle that maximized both the energy and exergy efficiencies as well as the work output per unit mass of input iron was a combined power cycle, where the topping cycle was a gas turbine cycle with one-stage compression and expansion and the bottoming cycle was a steam turbine cycle with two-stage expansion and reheat. This brought the theoretical energy efficiency to 59.87%, the theoretical exergy efficiency to 65.37%, and the theoretical work output per unit mass of iron to 4422 kJ/kg. The energy efficiency decreased to 56.81% when auxiliary devices were considered.  more » « less
Award ID(s):
2324411
PAR ID:
10657869
Author(s) / Creator(s):
; ;
Editor(s):
Metghalchi, Hameed
Publisher / Repository:
ASME
Date Published:
Journal Name:
ASME Open Journal of Engineering
Volume:
4
ISSN:
2770-3495
Subject(s) / Keyword(s):
Keywords: alternative energy sources, alternative propulsion/energy storage systems, clean energy, climate change, combined cycle, combustion, energy efficiency, energy storage, energy storage systems, exergy, fuel combustion, fuels and combustion, mechanical engineering
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Entropy)
    Thermoelectric (TE) waste heat recovery has attracted significant attention over the past decades, owing to its direct heat-to-electricity conversion capability and reliable operation. However, methods for application-specific, system-level TE design have not been thoroughly investigated. This work provides detailed design optimization strategies and exergy analysis for TE waste heat recovery systems. To this end, we propose the use of TE system equipped on the exhaust of a gas turbine power plant for exhaust waste heat recovery and use it as a case study. A numerical tool has been developed to solve the coupled charge and heat current equations with temperature-dependent material properties and convective heat transfer at the interfaces with the exhaust gases at the hot side and with the ambient air at the heat sink side. Our calculations show that at the optimum design with 50% fill factor and 6 mm leg thickness made of state-of-the-art Bi2Te3 alloys, the proposed system can reach power output of 10.5 kW for the TE system attached on a 2 m-long, 0.5 × 0.5 m2-area exhaust duct with system efficiency of 5% and material cost per power of 0.23 $/W. Our extensive exergy analysis reveals that only 1% of the exergy content of the exhaust gas is exploited in this heat recovery process and the exergy efficiency of the TE system can reach 8% with improvement potential of 85%. 
    more » « less
  2. ; ; (, Clean Technologies)
    Glycerol, a byproduct of biodiesel, has moderate energy but high viscosity, making clean combustion challenging. Quickly evaporating fine fuel sprays mix well with air and burn cleanly and efficiently. Unlike conventional air-blast atomizers discharging a jet core/film, a newly developed swirl burst (SB) injector generates fine sprays at the injector’s immediate exit, even for high-viscosity fuels, without preheating, using a unique two-phase atomization mechanism. It thus resulted in ultra-clean combustion for glycerol/methanol (G/M) blends, with complete combustion for G/M of 50/50 ratios by heat release rate (HRR). Lower combustion efficiencies were observed for G/M 60/40 and 70/30, representing crude glycerol. Hence, this study investigates the effect of premixed methane amount from 0–3 kW, and the effect of atomizing gas to liquid mass ratio (ALR) on the dual-fuel combustion efficiency of G/M 60/40-methane in a 7-kW lab-scale swirl-stabilized gas turbine combustor to facilitate crude glycerol use. Results show that more methane and increased ALR cause varying flame lift-off height, length, and gas product temperature. Regardless, mainly lean-premixed combustion, near-zero CO and NOx emissions (≤2 ppm), and ~100% combustion efficiency are enabled for all the cases by SB atomization with the assistance of a small amount of methane. 
    more » « less
  3. ; ; ; (, Angewandte Chemie International Edition)
    Abstract Redox flow batteries (RFBs) with high energy densities are essential for efficient and sustainable long‐term energy storage on a grid scale. To advance the development of nonaqueous RFBs with high energy densities, a new organic RFB system employing a molecularly engineered tetrathiafulvalene derivative ((PEG3/PerF)‐TTF) as a high energy density catholyte was developed. A synergistic approach to the molecular design of tetrathiafulvalene (TTF) was applied, with the incorporation of polyethylene glycol (PEG) chains, which enhance its solubility in organic carbonate electrolytes, and a perfluoro (PerF) group to increase its redox potential. When paired with a lithium metal anode, the two‐electron‐active(PEG3/PerF)‐TTFcatholyte produced a cell voltage of 3.56 V for the first redox process and 3.92 V for the second redox process. In cyclic voltammetry and flow cell tests, the redox chemistry exhibited excellent cycling stability. The Li|(PEG3/PerF)‐TTFbatteries, with concentrations of 0.1 M and 0.5 M, demonstrated capacity retention rates of ~94 % (99.87 % per cycle, 97.52 % per day) and 90 % (99.93 % per cycle, 99.16 % per day), and the average Coulombic efficiencies of 99.38 % and 98.35 %, respectively. The flow cell achieved a high power density of 129 mW/cm2. Furthermore, owing to the high redox potential and solubility of(PEG3/PerF)‐TTF, the flow cell attained a high operational energy density of 72 Wh/L (100 Wh/L theoretical). A 0.75 M flow cell exhibited an even higher operational energy density of 96 Wh/L (150 Wh/L theoretical). 
    more » « less
  4. ; ; (, SAMPE Journal)
    Worldwide wind energy generation capacity has grown rapidly over the past several decades, and wind turbines installed at the beginning of this wave of growth are approaching the end of their design lifetimes. As an increasing number of wind power plants reach their end of life, both decommissioning and repowering (i.e., dismantling or refurbishing existing turbines and commissioning new ones) will produce waste material from the retired wind turbines, foundations, and balance of plant. However, the amount and type of waste, particularly for wind blades, is often mischaracterized. Although wind turbine components are largely recyclable, the blades are typically made of fiberglass composites, which can present challenges for material recovery and reuse. Within the USA, the accumulation of wind turbine blades in landfills has raised questions about whether the continued expansion of wind energy is sustainable if it results in substantial future waste. This study compares the mass and volume of potential global wind blade waste to other waste streams. It also discusses the materials used to manufacture wind turbine blades and summarizes current options for material redesign, recycling (recovery and reuse), repurposing, and disposal of used blades. The analysis indicates that, although wind turbine blades could represent 14% of the composite market by 2027, the potential future mass and volume of wind turbine blade waste is relatively small compared to other industries. These findings suggest that although the development of scalable, economically viable, and environmentally sustainable methods for wind turbine manufacturing, repurposing, and recycling is important, it may make sense to take advantage of synergies among multiple industries in recycling composite waste, rather than focusing solely on wind turbine blades. From a global perspective, larger sustainability, recycling, and waste stream reduction impacts can be made in other industries, such as transportation and construction. 
    more » « less
  5. ; (, Proceedings of the ASME 2019 13th International Conference on Energy Sustainability collocated with the ASME 2019 Heat Transfer Summer Conference. ASME 2019 13th International Conference on Energy Sustainability)
    Abstract This paper presents an exergy-based sustainability analysis of manufacturing roof tiles from plastic waste in Uganda. Exergy analyses measure the sustainability of industrial processes. This work focuses specifically on the developing country context and on utilizing waste material. A summary of the current plastic waste situation in Uganda, the environmental and health issues associated with plastic waste, current means of recycling plastic waste into new products, and an analysis of the Ugandan roofing market are presented. The motivation for this study is to examine the resources utilized to improve overall exergy efficiency, reduce production costs, and reduce negative environmental impacts. The company, Resintile, is the only manufacturer of roof tiles from plastic waste in Uganda. Their tiles comprised mainly of sand and plastic waste are manufactured in an industrialized process involving drying, extrusion, and pressing. The exergy consumed at each stage including transportation is presented. The extruder consumes the majority of the exergy, but wrapping insulation around the barrel could save over 3 MJ, and a heat engine could provide over 7.5 MJ of usable exergy. The total exergy consumed to produce one batch of seventy-five tiles is over 122 MJ, the potentially recoverable exergy is over 5 MJ (4.3% of consumed exergy), and the realistic recoverable exergy is nearly 10.7 MJ (8.7% of consumed exergy). The realistic can be greater than the potential by adding a heat engine to the sand drying process to generate usable exergy rather than merely recover consumed exergy. Resintile’s plastic roof tiles save a net 86.3 kg of CO2 from entering the atmosphere per batch of tiles and adoption of the suggested improvements to the manufacturing process would save an additional 3.8 kg of CO2 per batch. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email