skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Machine-Learning Based Curing Cycle Optimization in Wind Blade Manufacturing
Abstract The vacuum-assisted resin infusion mold (VARIM) process is widely used in wind blade manufacturing for its cost-effectiveness and reliability. However, the current method faces challenges such as long curing times and defects due to nonuniform heating across the blade structure. To address this, a multi-zone heated bed setup tailored to blade thickness has been considered. However, determining an optimal temperature for each zone poses a computational challenge, which can be tackled with a novel machine-learning approach. Using a digital twin based on a high-fidelity multiphysics solver, a time-distributed LSTM model was trained to understand complex resin curing dynamics. This eliminates the need for costly lab experiments, as the model learns heating patterns and curing behavior efficiently. Once trained, the ML model acts as a digital twin by predicting the degree of cure for a given temperature setpoint with 96.73% accuracy. This model, when used as a surrogate for a Nelder-mead optimization workflow, improves the curing time by roughly 12.5% and presents a more uniform curing rate throughout the part.  more » « less
Award ID(s):
1916776
PAR ID:
10658502
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Copernicus Publications)
    Abstract. The Vacuum-Assisted Resin Infusion Molding (VARIM) process is widely used in wind turbine blade manufacturing due to its cost-effectiveness and reliability. However, challenges such as prolonged curing cycles and defects caused by non-uniform cure remain persistent. To address these issues, multizone heating systems have been developed to enable independent temperature control across blade sections. Yet, optimizing the temperature profile in each zone is computationally intensive, requiring detailed modelling of curing kinetics and heat transfer mechanisms. To overcome these challenges, in this work, a machine learning (ML) based digital twin of the VARIM process was developed using a time-distributed long short-term memory (LSTM) network trained on data generated by a high-fidelity multiphysics solver. The model achieved a predictive accuracy of 96.7 % in replicating the resin curing behavior. Its time-distributed architecture effectively captures the spatial – temporal dependencies across multiple zones, allowing precise prediction of the degree-of-cure evolution. Paired with a gradient-free optimization algorithm, the digital twin reduced curing time by 12.5 % while improving cure uniformity. This AI-driven framework eliminates costly trial-and-error experimentation, and provides a scalable, adaptive solution for improving both quality and productivity in wind turbine blade manufacturing, with strong potential for extension to other composite manufacturing processes. 
    more » « less
  2. ; ; ; (, Soft Matter)
    Radio-frequency (RF) heating of thermosetting epoxies is an agile method to decouple the extrudability of epoxy resins from their buildability for additive manufacturing. Through this method, the resin is extruded in the liquid state at the early stages of curing. Then, an RF applicator induces a rapid and uniform increase in temperature of the resin, accelerating the solidification of the printed feature. Understanding the evolution of the resin's RF heating response as it cures is therefore critical in meeting the demands of additive manufacturing. In this work, we show that the high-frequency dielectric loss, determined using in situ rheo-dielectric measurements, of both neat and carbon nanotube (CNT) filled resins is correlated to the heating response at different temperatures throughout curing. Furthermore, we show that the presence of CNTs within the resin augments the heating response and that their dispersion quality is critical to achieving rapid heating rates during the cure. 
    more » « less
  3. ; ; (, MRS Advances)
    Abstract Traditionally, resins and hardeners are produced by chemical and petroleum industries. These industries make use of non-renewable energy resources like fossil fuels for manufacturing the resins and curing agents. In addition, most of the conventional curing agents used in epoxy resins are highly noxious in nature causing skin allergies and asthma. The green epoxy resin is capable of reducing these toxic effects but have few shortcomings including its cost and the mechanical performance of cured epoxy resin. On the other hand, there is a dearth of investigation in the evolution of green or sustainable curing agents known as bio-binders. This paper presents the prediction of mechanical properties by replacement of conventional curing agent with amine derivative synthesized from bio-degradable resource in a thermoset epoxy resin system. The properties are predicted by molecular dynamics simulations using Materials Studio Software. Graphical Abstract 
    more » « less
  4. ; ; ; ; ; ; (, Frontiers in Soft Matter)
    In situ X-ray photon correlation spectroscopy (XPCS) was used to investigate the crosslinking kinetics of a two-component epoxy resin adhesive. The effect of external temperature on the crosslinking reaction was studied by subjecting the epoxy to different curing temperature profiles. The temporally resolved dynamics of fillers was tracked, which conveniently served as a probe of the internal dynamics of the thermoset network and allowed us to study the crosslinking process. The epoxy resins showed different relaxation processes depending on temperature, indicating a complex relationship between applied temperature and the development of stress/relaxation conditions related to the formation of the thermoset network and subsequent vitrification process. The epoxy was found to be highly temperature sensitive, with heating to elevated temperatures promoting gelation, but the vitrification process was not completed during the isothermal curing stage. Instead, cooling the sample to room temperature facilitated the final vitrification process. Finally, this paper contextualizes the results of this epoxy system within the broader field of XPCS on complex polymer systems and further advocates for XPCS as a fundamental technique for the study of complex polymers. 
    more » « less
  5. ; ; ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract We introduce a novel digital twin framework for predictive maintenance of physical systems with long term operations. Using monitoring tire health as an application, we show how the digital twin framework is used to enhance automotive safety and efficiency, while overcoming technical challenges using a three-step approach. Firstly, for managing the data complexity over a long operation span, we employ data reduction techniques to concisely represent physical tires using historical performance and usage data. Relying on this data, for fast real-time prediction, we train a transformer-based model offline on our concise dataset to predict future tire health over time, represented as Remaining Casing Potential (RCP). Based on our architecture, our model quantifies both epistemic and aleatoric uncertainty, providing reliable confidence intervals around predicted RCP. Secondly, we incorporate real-time data by updating the predictive model in the digital twin framework, ensuring its accuracy throughout its life span with the aid of hybrid modeling and the use of a discrepancy function. Thirdly, to assist decision making in predictive maintenance, we implement a Tire State Decision Algorithm, which strategically determines the optimal timing for tire replacement based on RCP forecasted by our transformer model. This three-step approach ensures that our digital twin not only accurately predicts the health of a system, but also continually refines its digital representation and makes predictive maintenance decisions for removal from service. Our proposed digital twin framework embodies a physical system accurately and leverages big data and machine learning for predictive maintenance, model update and decision making. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email