An official website of the United States government
Abstract Objective. Motivated by the diagnostic value of tissue viscosity beyond elasticity, the goal of this work is to develop robust methodologies based on shear wave elastography (SWE) to reconstruct combined elasticity and viscosity maps of soft tissues out of the measurement plane.Approach.Building on recent advancements in full-waveform inversion in reconstructing elasticity maps beyond the measurement plane, we propose to reconstruct a complete viscoelasticity map by novel combination of three ideas: (a) multiresolution imaging, where lower frequency content is used to reconstruct low resolution map, which is then utilized as a starting point for higher resolution reconstruction by including higher frequency content; (b) acquiring SWE data on multiple planes from multiple pushes, one at a time, and then simultaneously using all the data to invert for a single viscoelasticity map; (c) sequential reconstruction where combined viscoelasticity reconstruction is followed by fixing the elasticity map (and thus kinematics), and repeating the reconstruction but just for the viscosity map.Main results.We examine the proposed methodology using synthetic SWE data to reconstruct the viscoelastic properties of both homogeneous and heterogeneous tumor-like inclusions with shear modulus ranging from 3 to 20 kPa, and viscosity ranging from 1 to 3 Pa·s. Final validation is performedin silico, where the annular inclusion is reconstructed using noisy data with varying signal-to-noise ratios (SNR) of 30, 20 and 10 dB. While elasticity images are reasonably reconstructed even for poor SNR of 10 dB, viscosity imaging seem to require better SNR.Significance.This work, analogous to reconstructing 3D images from 2D measurements, offers a feasibility study for achieving 3D viscoelasticity reconstructions using conventional ultrasound scanners, potentially leading to biomarkers with greater specificity compared to currently available 2D elasticity images.
more »
« less
3D Multi-plane Multi-resolution Shear Wave Elastography
We utilize Full Waveform Inversion (FWI) framework to convert shear wave elastography (SWE) measurements on multiple planes to a single three-dimensional (3D) image of elasticity using gradient optimization to adjust the elasticity map until the mismatch between simulated and measured particle velocities is minimized. Several ideas are brought together to ensure the robustness and effectiveness of the proposed FWI: correlation-based matching between measurements and simulation, high-fidelity finite element simulation of 3D shear waves in incompressible elastic media, multi-resolution parametrization to help with convergence, multi-frequency continuation for finer resolution imaging, and multi-push illumination. With the help of in silico and phantom validation studies, the algorithm is shown to be effective in providing images outside the measurement plane, including reconstructing full 3D images from 2D.
more »
« less
- Award ID(s):
- 2111234
- PAR ID:
- 10659428
- Publisher / Repository:
- 2024 IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS)
- Date Published:
- Format(s):
- Medium: X
- Location:
- Taipei, Taiwan
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Objective. With the ultimate goal of reconstructing 3D elasticity maps from ultrasound particle velocity measurements in a plane, we present in this paper a methodology of inverting for 2D elasticity maps from measurements on a single line.Approach. The inversion approach is based on gradient optimization where the elasticity map is iteratively modified until a good match is obtained between simulated and measured responses. Full-wave simulation is used as the underlying forward model to accurately capture the physics of shear wave propagation and scattering in heterogeneous soft tissue. A key aspect of the proposed inversion approach is a cost functional based on correlation between measured and simulated responses.Main results. We illustrate that the correlation-based functional has better convexity and convergence properties compared to the traditional least-squares functional, and is less sensitive to initial guess, robust against noisy measurements and other errors that are common in ultrasound elastography. Inversion with synthetic data illustrates the effectiveness of the method to characterize homogeneous inclusions as well as elasticity map of the entire region of interest.Significance. The proposed ideas lead to a new framework for shear wave elastography that shows promise in obtaining accurate maps of shear modulus using shear wave elastography data obtained from standard clinical scanners.more » « less
-
Abstract Objective. Arterial viscosity is emerging as an important biomarker, in addition to the widely used arterial elasticity. This paper presents an approach to estimate arterial viscoelasticity using shear wave elastography (SWE).Approach. While dispersion characteristics are often used to estimate elasticity from SWE data, they are not sufficiently sensitive to viscosity. Driven by this, we develop a full waveform inversion (FWI) methodology, based on directly matching predicted and measured wall velocity in space and time, to simultaneously estimate both elasticity and viscosity. Specifically, we propose to minimize an objective function capturing the correlation between measured and predicted responses of the anterior wall of the artery.Results. The objective function is shown to be well-behaving (generally convex), leading us to effectively use gradient optimization to invert for both elasticity and viscosity. The resulting methodology is verified with synthetic data polluted with noise, leading to the conclusion that the proposed FWI is effective in estimating arterial viscoelasticity.Significance. Accurate estimation of arterial viscoelasticity, not just elasticity, provides a more precise characterization of arterial mechanical properties, potentially leading to a better indicator of arterial health.more » « less
-
Full waveform inversion (FWI) and distributed acoustic sensing (DAS) are powerful tools with potential to improve how seismic site characterization is performed. FWI is able to provide true 2D or 3D images of the subsurface by inverting stress wave recordings collected over a wide variety of scales. DAS can be used to efficiently collect high-resolution stress wave recordings from long and complex fiber optic arrays and is well-suited for large-scale site characterization projects. Due to the relative novelty of combining FWI and DAS, there is presently little published literature regarding the application of FWI to DAS data for near-surface (depths < 30 m) site characterization. We perform 2D FWI on DAS data collected at a well-characterized site using four different, site-specific 1D and 2D starting models. We discuss the unique benefits and challenges associated with inverting DAS data compared to traditional geophone data. We examine the impacts of using the various starting models on the final 2D subsurface images. We demonstrate that while the inversions performed using all four starting models are able to fit the major features of the DAS waveforms with similar misfit values, the final subsurface images can be quite different from one another at depths greater than about 10 m. As such, the best representation(s) of the subsurface are evaluated based on: (1) their agreement with borehole lithology logs that were not used in the development of the starting models, and (2) consistency at shallow depths between the final inverted images derived from multiple starting models. Our results demonstrate that FWI applied to DAS data has significant potential as a tool for near-surface site characterization while also emphasizing the significant impact that starting model selection can have on FWI results.more » « less
-
Understanding subsurface conditions is critical to creating and maintaining resilient infrastructure systems, such as dams and levees. Seismic geophysical tools can be very effective for site characterization of these structures as they directly measure the elastic moduli and can provide insight into both the soil properties and groundwater conditions. Full waveform inversion (FWI) is one processing option for seismic geophysics that seeks to overcome some of the limitations in the traditional approaches by using the full time-domain recording of the wavefield to develop 2D or 3D profiles of shear wave velocity. In addition to providing characterization data, FWI can also potentially be used as a monitoring tool for dams and levees to assess how elastic moduli are changing with time and to infer how these changes might relate to changes in the hydromechanical properties of the soil. This study seeks to explore the use of seismic FWI as both a characterization and monitoring tool through numerical simulations of seismic surveys on a hypothetical levee with a low velocity anomaly in the foundation. The simulations are used to assess both the spatial resolution and the ability of the simulations to detect changes in properties that might be related to softening of the foundation or development of internal erosion failure modes. The findings from the study will be used to highlight potential benefits and challenges to using seismic FWI for characterization and monitoring of dams and levees.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Proceeding:
- The DOI is not currently available.
