Search for: All records

Electrocatalytic water splitting presents an exciting opportunity to produce environmentally benign hydrogen fuel to power human activities. Earth abundant Ni5P4 has emerged as an efficient catalyst for the hydrogen evolution reaction (HER) and its activity can be enhanced by admixing synergistic metals to modify the surface affinity and consequently kinetics of HER. Computational studies suggest that the HER activity of Ni5P4 can be improved by Zn doping, causing a chemical pressure-like effect on Ni3 hollow sites. Herein, we report a facile colloidal route to produce Ni5-xZnxP4 nanocrystals (NCs) with control over structure, morphology, and composition and investigate their composition-dependent HER activity in alkaline solutions. Ni5-xZnxP4 NCs retain the hexagonal structure and solid spherical morphology of binary Ni5P4 NCs with a notable size increase from 9.2-28.5 nm for x = 0.00-1.27 compositions. Elemental maps affirm the homogeneous ternary alloy formation with no evidence of Zn segregation. Surface analysis of Ni5-xZnxP4 NCs indicates significant modulation of the surface polarization upon Zn incorporation resulting in a decrease in Niδ+ and an increase in Pδ- charge. Although all compositions followed a Volmer-Heyrovsky HER mechanism, the modulated surface polarization enhances the reaction kinetics producing lower Tafel slopes for Ni5-xZnxP4 NCs (82.5-101.9 mV/dec for x = 0.10-0.84) compared to binary Ni5P4 NCs (109.9 mV/dec). Ni5-xZnxP4 NCs showed higher HER activity with overpotentials of 131.6-193.8 mV for x = 0.02-0.84 in comparison to Ni5P4 NCs (218.1 mV) at a current density of -10 mA/cm2. Alloying with Zn increases the material’s stability with only a ~10% increase in overpotential for Ni4.49Zn0.51P4 NCs at -50 mA/cm2, whereas a ~33% increase was observed for Ni5P4 NCs. At current densities above -40 mA/cm2, bimetallic NCs with x = 0.10, 0.29, and 0.51 compositions outperformed the benchmark Pt/C catalyst, suggesting that hexagonal alloyed Ni5-xZnxP4 NCs are excellent candidates for practical applications that necessitate lower HER overpotentials at higher current densities. 

Group IV alloy nanocrystals (NCs) are a class of direct energy gap semiconductors that show high elemental abundance, low to non-toxicity, and composition-tunable absorption and emission properties. These properties have distinguished Ge1-xSnx NCs as an intriguing material for near-infrared (IR) optical studies. Achieving a material with efficient visible emission requires a modified class of Group IV alloys and the computational studies suggest that this can be achieved with Ge1-x-ySiySnx NCs. Herein, we report a colloidal strategy for the synthesis of bulk-like (10.3 ± 2.5 – 25.5 ± 5.3 nm) and quantum-confined (3.2 ± 0.6 – 4.2 ± 1.1 nm) Ge1-x-ySiySnx alloys that show strong size confinement effects and composition-tunable visible to near IR absorption and emission properties. This synthesis produces a homogeneous alloy with diamond cubic Ge structure and tunable Si (0.9 – 16.1%) and Sn (1.8 – 14.9%) compositions, exceeding the equilibrium solubility of Sn (<1%) in crystalline Si and Ge. Raman spectra of Ge1-x-ySiySnx alloys show a prominent redshift of the Ge-Ge peak and the emergence of a Ge-Si peak with increasing Si/Sn, suggesting the growth of homogeneous alloys. The smaller Ge1-x-ySiySnx NCs exhibit absorption onsets from 1.21 to 1.94 eV for x = 1.8 – 6.8% and y = 0.9 – 16.1% compositions, which are blueshifted from those reported for Ge1-x-ySiySnx bulk alloy films and Ge1-xSnx alloy NCs, indicating the influence of Si incorporation and strong size confinement effects. Solid-state photoluminescence (PL) spectra reveal core-related PL maxima from 1.77 – 1.97 eV in agreement with absorption onsets, consistent with the energy gaps calculated for ~3–4 nm alloy NCs. With facile low-temperature solution synthesis and direct control over physical properties, this methodology presents a noteworthy advancement in the synthesis of bulk-like and quantum-confined Ge1-x-ySiySnx alloys as versatile materials for future optical and electronic studies. 

Size-confined Si nanorods (NRs) have gained notable interest because of their tunable photophysical properties that make them attractive for optoelectronic, charge storage, and sensor technologies. However, established routes for fabrication of Si NRs use well-defined substrates and/or nanoscopic seeds as promoters that cannot be easily removed, hindering the investigation of their true potential and physical properties. Herein, we report a facile, one-step route for the fabrication of Si NRs via thermal disproportionation of hydrogen silsesquioxane (HSQ) in the presence of a molecular tin precursor (SnCl4) at a substantially lower temperature (450 ºC) compared to those used in the synthesis of size-confined Si nanocrystals (>1000 ºC). The use of these precursors allows the facile isolation of phase pure Si NRs via HF etching and subsequent surface passivation with 1-dodecene via hydrosilylation. The diameters (7.7–16.5 nm) of the NRs can be controlled by varying the amount of SnCl4 (0.2–3.0%) introduced during the HSQ synthesis. Physical characterization of the NRs suggests that the diamond cubic structure is not affected by the SnCl4, HF etching, and hydrosilylation. Surface analysis of NRs indicates the presence of Si0 and Sin+ species, which can be attributed to core Si and surface Si species bonded to dodecane ligands, respectively, and a systematic variation of Si0: Si-C ratio with the NR diameter. The NRs show strong size confinement effects with solid-state absorption onsets (2.51–2.80 eV) and solution-state (Tauc) indirect energy gaps (2.54–2.70 eV) that can be tuned by varying the diameters (16.5–7.7 nm), respectively. Photoluminescence (PL) and time-resolved PL (TRPL) studies reveal size-dependent emission (1.95–2.20 eV) with short, nanosecond lifetimes across the visible spectrum which trend closely to absorption trends seen in solid-state absorption data. The facile synthesis developed for size-confined Si NRs with high crystallinity and tunable optical properties will promote their application in optoelectronic, charge storage, and sensing studies. 

Metal–semiconductor hybrid nanomaterials (HNMs) exhibit unique properties that are distinct from individual nanostructures, leading to promising applications in optical technologies. The interfacial linkage of semiconductor and metal nanoparticles (NPs) via cogelation is an effective strategy to produce HNMs that show strong plasmon‐exciton coupling and improved physical properties. However, optical properties of these hybrids show little to no tunability. Herein, CdSe/Ag hybrid aerogels that show tunable absorption and photoluminescence (PL) are produced by cogelation of CdSe nanorods (NRs) or NPs with Ag hollow NPs. Hybrid electronic states are created by overlapping the excitonic absorption of CdSe NRs or NPs with the plasmonic absorption of Ag NPs. Physical characterization of the hybrids reveals an interconnected network of hexagonal CdSe and cubic Ag NPs, linked by Ag⁺and Se²⁻surface species, without intervening ligands. PL spectra exhibit maxima at 640 and 720 nm for the CdSe NPs/Ag and CdSe NRs/Ag hybrids, respectively, corresponding to new radiative decay mechanisms. Time‐resolved PL data support the emergence of new radiative pathways, kinetically and energetically distinct from the excitonic and plasmonic properties of primary NPs. This new approach of metal–semiconductor hybrid formation through cogelation is intriguing for the design of high‐efficiency HNMs without detrimental PL quenching.