Search for: All records

Due to the increased demand of network traffic expected during the HL-LHC era, the T2 sites in the USA will be required to have 400Gbps of available bandwidth to their storage solution. With the above in mind we are pursuing a scale test of XRootD software when used to perform Third Party Copy transfers using the HTTP protocol. Our main objective is to understand the possible limitations in the software stack to achieve the target transfer rate; to that end we have set up a testbed of multiple XRootD servers in both UCSD and Caltech which are connected through a dedicated link capable of 400 Gbps end-to-end. Building upon our experience deploying containerized XRootD servers, we use Kubernetes to easily deploy and test different configurations of our testbed. In this work, we will present our experience doing these tests and the lessons learned. 

Creating new materials, discovering new drugs, and simulating systems are essential processes for research and innovation and require substantial computational power. While many applications can be split into many smaller independent tasks, some cannot and may take hours or weeks to run to completion. To better manage those longer-running jobs, it would be desirable to stop them at any arbitrary point in time and later continue their computation on another compute resource; this is usually referred to as checkpointing. While some applications can manage checkpointing programmatically, it would be preferable if the batch scheduling system could do that independently. This paper evaluates the feasibility of using CRIU (Checkpoint Restore in Userspace), an open-source tool for the GNU/Linux environments, emphasizing the OSG’s OSPool HTCondor setup. CRIU allows checkpointing the process state into a disk image and can deal with both open files and established network connections seamlessly. Furthermore, it can checkpoint traditional Linux processes and containerized workloads. The functionality seems adequate for many scenarios supported in the OSPool. However, some limitations prevent it from being usable in all circumstances. 

The Large Hadron Collider (LHC) experiments distribute data by leveraging a diverse array of National Research and Education Networks (NRENs), where experiment data management systems treat networks as a “blackbox” resource. After the High Luminosity upgrade, the Compact Muon Solenoid (CMS) experiment alone will produce roughly 0.5 exabytes of data per year. NREN Networks are a critical part of the success of CMS and other LHC experiments. However, during data movement, NRENs are unaware of data priorities, importance, or need for quality of service, and this poses a challenge for operators to coordinate the movement of data and have predictable data flows across multi-domain networks. The overarching goal of SENSE (The Software-defined network for End-to-end Networked Science at Exascale) is to enable National Labs and universities to request and provision end-to-end intelligent network services for their application workflows leveraging SDN (Software-Defined Networking) capabilities. This work aims to allow LHC Experiments and Rucio, the data management software used by CMS Experiment, to allocate and prioritize certain data transfers over the wide area network. In this paper, we will present the current progress of the integration of SENSE, Multi-domain end-to-end SDN Orchestration with QoS (Quality of Service) capabilities, with Rucio, the data management software used by CMS Experiment. 

The High Luminosity Large Hadron Collider provides a data challenge. The amount of data recorded from the experiments and transported to hundreds of sites will see a thirty fold increase in annual data volume. A systematic approach to contrast the performance of different Third Party Copy (TPC) transfer protocols arises. Two contenders, XRootD-HTTPS and the GridFTP are evaluated in their performance for transferring files from one server to another over 100Gbps interfaces. The benchmarking is done by scheduling pods on the Pacific Research Platform Kubernetes cluster to ensure reproducible and repeatable results. This opens a future pathway for network testing of any TPC transfer protocol. 

Abstract Cementitious binders amenable to extrusion‐based 3D printing are formulated by tailoring the fresh microstructure through the use of fine limestone powder or a combination of limestone powder and microsilica or metakaolin. Mixtures are proportioned with and without a superplasticizer to enable different particle packings at similar printability levels. A simple microstructural parameter, which implicitly accounts for the solid volume and inverse square dependence of particle size on yield stress can be used to select preliminary material combinations for printable binders. The influence of composition/microstructure on the response of pastes to extension or squeezing are also brought out. Extrusion rheology is used in conjunction with a phenomenological model to better understand the properties of significance in extrusion‐based printing of cementitious materials. The extrusion yield stress and die wall slip shear stress extracted from the model enables an understanding of their relationships with the fresh paste microstructure, which are crucial in selecting binders, extrusion geometry, and processing parameters for 3D printing.