skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Friday, December 13 until 2:00 AM ET on Saturday, December 14 due to maintenance. We apologize for the inconvenience.


Search for: All records

Creators/Authors contains: "Feng, Peter"

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. In this paper, high-performance UV photodetectors have been demonstrated based on indium oxide (In2O3) thin films of approximately 1.5–2 μm thick, synthesized by a simple and quick plasma sputtering deposition approach. After the deposition, the thin-film surface was treated with 4–5 nm-sized platinum (Pt) nanoparticles. Then, titanium metal electrodes were deposited onto the sample surface to form a metal–semiconductor–metal (MSM) photodetector of 50 mm2 in size. Raman scattering spectroscopy and scanning electron microscope (SEM) were used to study the crystal structure of the synthesized In2O3 film. The nanoplasmonic enhanced In2O3-based UV photodetectors were characterized by various UV wavelengths at different radiation intensities and temperatures. A high responsivity of up to 18 A/W was obtained at 300 nm wavelength when operating at 180 °C. In addition, the fabricated prototypes show a thermally stable baseline and excellent repeatability to a wide range of UV lights with low illumination intensity when operating at such a high temperature.

     
    more » « less
  2. We report studies of multifunctional, nanostructured diamond composites that were fabricated using chemical vapor deposition (CVD) techniques. Grain sizes from micrometer, to submicron, nano, and ultrananocrystalline diamond (UNCD) were controlled by varying CH4, hydrogen, and argon gas concentrations during the syntheses. Scanning electron microscopy (SEM) and Raman scattering spectroscopy were used to investigate the morphologies, composites, and crystallinities of the films. Four multifunctional sensor prototypes were designed, fabricated, and tested, based on the four diamond materials of different grain sizes. The responses of the four prototypes to either pollution gas or UV light illumination were systematically investigated at different operating temperatures. Experimental data indicated the obtained UNCD composite from the low-cost simple CVD fabrication technique appeared to have very good sensitivities when exposed to low concentrations of H2 or NH3 gas with a decent response and fast recovery time. Furthermore, highly induced photocurrents from both microdiamond- and UNCD-based prototypes to deep UV illumination were also demonstrated, with responsivities up to 2750 mA/W and 550 mA/W at 250 nm wavelength, respectively. Overall, the fabricated UNCD prototypes displayed a good balance in performance for multifunctional sensor applications in terms of responsivity, stability, and repeatability.

     
    more » « less
  3. Two-dimensional (2D) tungsten disulfide nanosheets (WS2) could be a promising candidate for high-performance self-powered photodetectors. The present 2D nanosheets were obtained from liquid exfoliation in a mixture of ethanol, methanol, and isopropanol via a direct dispersion and ultrasonication method. Using the spin-coating technique, a thin film of uniform thickness was formed on the SiO2/Si substrate. Energy-dispersive X-ray analysis showed that the S/W ratio in the fabricated WS2 film was around 1.2 to 1.34, indicating certain deficiencies in the S atoms. These S vacancies induce localized states within the bandgap of pristine WS2, resulting in a higher conductivity in the exfoliated sample. The obtained thin film seems to be highly efficient in photoelectric conversion, with a responsivity of ~0.12 mA/W at 670 nm under zero bias voltage, with an intensity of 5.2 mW/cm2. Instead, at a bias of 2 V, it exhibits a responsivity of 12.74 mA/W and a detectivity of 1.17 × 1010 cm Hz1/2 W− 1 at 4.1 mW/cm2. The present 2D nanosheets exhibit high photon absorption in a wide range of spectra from the near infrared (IR) to near UV spectrum. 
    more » « less
  4. It is a challenging task to fabricate thermally stable Photodetectors (PDs) working in visible light spectrum range due to the degradation in photoresponse characteristics. Herein, excellent performance parameters with photoresponsivity reached up to as high as 50 AW -1 , and ultrahigh specific detectivity in excess of 2.3×10 12 Jones have been obtained simultaneously in a single photodetector based on vertical MoS 2 (v-MoS 2 ) at a high temperature of 200°C. The TiO 2 interlay layer is ascribed as the main factor to enhance the PDs performances by reducing lattice mismatch between v-MoS 2 and substrate, separating photogenerated electron-hole pairs (EHPs), and the formation of the vertical MoS 2 nanostructures. Besides, the optoelectronics performances of the v-MoS 2 /TiO 2 heterostructures based field-effect transistor (FET) have also been examined under various operating temperatures, and the mechanism on how gate voltages affect the PDs performances has also been studied. In a word, the present fabricated v-MoS 2 /TiO 2 heterostructures based FET PDs will find practical applications in high-temperature environment. 
    more » « less
  5. With the advances in nanofabrication technology, horizontally aligned and well-defined nitrogen-doped ultrananocrystalline diamond nanostripes can be fabricated with widths in the order of tens of nanometers. The study of the size-dependent electron transport properties of these nanostructures is crucial to novel electronic and electrochemical applications. In this paper, 100 nm thick n-type ultrananocrystalline diamond thin films were synthesized by microwave plasma-enhanced chemical vapor deposition method with 5% N2 gas in the plasma during the growth process. Then the nanostripes were fabricated using standard electron beam lithography and reactive ion etching techniques. The electrical transport properties of the free-standing single nanostripes of different widths from 75 to 150 nm and lengths from 1 to 128 μm were investigated. The study showed that the electrical resistivity of the n-type ultrananocrystalline diamond nanostripes increased dramatically with the decrease in the nanostripe width. The nanostripe resistivity was nearly doubted when the width was reduced from 150 nm to 75 nm. The size-dependent variability in conductivity could originate from the imposed diffusive scattering of the nanostripe surfaces which had a further compounding effect to reinforce the grain boundary scattering. 
    more » « less
  6. Abstract Carbon doped two-dimensional (2D) hexagonal boron nitride nanosheets (BNNSs) are obtained through a CO 2 —pulsed laser deposition (CO 2 —PLD) technique on silicon dioxide (SiO 2 ) or molybdenum (Mo) substrates, showing - stable hysteresis characteristics over a wide range of temperatures, which makes them a promising candidate for materials based on non-volatile memory devices. This innovative material with electronic properties of n-type characterized in the form of back-to-back Schottky diodes appears to have special features that can enhance the device performance and data retention due to its functional properties, thermal-mechanical stability, and its relation with resistive switching phenomena. It can also be used to eliminate sneak current in resistive random-access memory devices in a crossbar array. In this sense constitutes a good alternative to design two series of resistance-switching Schottky barrier models in the gold/BNNS/gold and gold/BNNS/molybdenum structures; thus, symmetrical and non-symmetrical characteristics are shown at low and high bias voltages as indicated by the electrical current-voltage (I–V) curves. On the one hand, the charge recombination caused by thermionic emission does not significantly change the rectification characteristics of the diode, only its hysteresis properties change due to the increase in external voltage in the Schottky junctions. The addition of carbon to BNNSs creates boron vacancies that exhibit partially ionic character, which also helps to enhance its electrical properties at the metal-BNNS-metal interface. 
    more » « less
  7. null (Ed.)
    We report on the different surface structures of tungsten oxides which have been synthesized using a simple post-annealing-free hot-filament CVD technique, including 0D nanoparticles (NPs), 1D nanorods (NRs), and 2D nanosheet assemblies of 3D hierarchical nanoflowers (NFs). The surface morphologies, crystalline structures, and material compositions have been characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Raman spectroscopy, respectively. The sensor performances based on the synthesized samples of various surface morphologies have been investigated, as well as the influences of operating temperature and applied bias. The sensing property depends closely on the surface morphology, and the 3D hierarchical nanoflowers-based gas sensor offers the best sensitivity and fastest response time to NH3 and CH3 gases when operated at room temperature. 
    more » « less
  8. Diamond-based sensors have shown great potential in the past few years due to their unique physicochemical properties. We report on the development of high-performance nitrogen-doped ultrananocrystalline diamond (UNCD) nanowire-based methane (CH4) gas sensors, taking advantage of a large surface-to-volume ratio and a small active area offered by the 1D nanowire geometry. The morphologic surface and crystalline structures of UNCD are also characterized by using scanning electron microscopy (SEM) and Raman scattering, respectively. By using synthesized nanowire arrays combined with 4-pin electrical electrodes, prototypic highly sensitive CH4 gas sensors have been designed, fabricated and tested. Various parameters including the sensitivity, response and recovery times, and thermal effect on the performance of the gas sensor have also been investigated in order to quantitate the sensing ability. Enhanced by the small grain size and porosity of the nanowire structure, fabricated nanowire UNCD sensors demonstrated a high sensitivity to CH4 gas at room temperature down to 2 ppm, as well as fast response and recovery times which are almost 10 times faster than that of regular nanodiamond thin film based sensors. 
    more » « less
  9. null (Ed.)
    This study presents a fast and effective method to synthesize 2D boron nitride/tungsten nitride (BN–WN) nanocomposites for tunable bandgap structures and devices. A few minutes of synthesis yielded a large quantity of high-quality 2D nanocomposites, with which a simple, low-cost deep UV photo-detector (DUV-PD) was fabricated and tested. The new device was demonstrated to have very good performance. High responsivity up to 1.17 A/W, fast response-time of lower than two milliseconds and highly stable repeatability were obtained. Furthermore, the influences of operating temperature and applied bias voltage on the properties of DUV-PD as well as its band structure shift were investigated. 
    more » « less