Search for: All records

Low-power 3D perception is useful in a wide range of computer-vision applications. Thanks to the increasing availability of high-resolution single-photon avalanche diode (SPAD) arrays, single-photon LiDARs (SPLs) have emerged as a promising technology for 3D sensing. The conventional image formation model for an SPL involves capturing the time-varying light intensity - which we call the transient distribution - of a reflected laser pulse in the form of an equi-width (EW) histogram. Unfortunately, this approach leads to unmanageable data rates (~gigabytes/second) with high-resolution arrays, severely limiting the applicability of SPLs in power- and bandwidth-constrained scenarios (e.g., mobile devices). The proposal introduces a different approach using race logic processing to construct equi-depth histograms with variable bin widths, which reduces the bandwidth requirement while maintaining similar ranging accuracy, showing bandwidth reduction of over 100× in simulations. 

Single-photon 3D cameras can record the time of arrival of billions of photons per second with picosecond accuracy. One common approach to summarize the photon data stream is to build a per-pixel timestamp histogram, resulting in a 3D histogram tensor that encodes distances along the time axis. As the spatio-temporal resolution of the histogram tensor increases, the in-pixel memory requirements and output data rates can quickly become impractical. To overcome this limitation, we propose a family of linear compressive representations of histogram tensors that can be computed efficiently, in an online fashion, as a matrix operation. We design practical lightweight compressive representations that are amenable to an in-pixel implementation and consider the spatio-temporal information of each timestamp. Furthermore, we implement our proposed framework as the first layer of a neural network, which enables the joint end-to-end optimization of the compressive representations and a downstream SPAD data processing model. We find that a well-designed compressive representation can reduce in-sensor memory and data rates up to 2 orders of magnitude without significantly reducing 3D imaging quality. Finally, we analyze the power consumption implications through an on-chip implementation. 

Abstract Image sensors capable of capturing individual photons have made tremendous progress in recent years. However, this technology faces a major limitation. Because they capture scene information at the individual photon level, the raw data is sparse and noisy. Here we propose CASPI: Collaborative Photon Processing for Active Single-Photon Imaging, a technology-agnostic, application-agnostic, and training-free photon processing pipeline for emerging high-resolution single-photon cameras. By collaboratively exploiting both local and non-local correlations in the spatio-temporal photon data cubes, CASPI estimates scene properties reliably even under very challenging lighting conditions. We demonstrate the versatility of CASPI with two applications: LiDAR imaging over a wide range of photon flux levels, from a sub-photon to high ambient regimes, and live-cell autofluorescence FLIM in low photon count regimes. We envision CASPI as a basic building block of general-purpose photon processing units that will be implemented on-chip in future single-photon cameras. 

Time-resolved image sensors that capture light at pico-tonanosecond timescales were once limited to niche applications but are now rapidly becoming mainstream in consumer devices. We propose lowcost and low-power imaging modalities that capture scene information from minimal time-resolved image sensors with as few as one pixel. The key idea is to flood illuminate large scene patches (or the entire scene) with a pulsed light source and measure the time-resolved reflected light by integrating over the entire illuminated area. The one-dimensional measured temporal waveform, called transient, encodes both distances and albedoes at all visible scene points and as such is an aggregate proxy for the scene’s 3D geometry. We explore the viability and limitations of the transient waveforms by themselves for recovering scene information, and also when combined with traditional RGB cameras. We show that plane estimation can be performed from a single transient and that using only a few more it is possible to recover a depth map of the whole scene. We also show two proof-of-concept hardware prototypes that demonstrate the feasibility of our approach for compact, mobile, and budget-limited applications.