skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, February 13 until 2:00 AM ET on Friday, February 14 due to maintenance. We apologize for the inconvenience.


Search for: All records

Creators/Authors contains: "Manzi, Jacob"

Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher. Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

  1. Flexible electronics on low-temperature substrates like paper are very appealing for their use in disposable and biocompatible electronic applications and areas like healthcare, wearables, and consumer electronics. Plasma-jet printing uses a dielectric barrier discharge plasma to focus aerosolized nanoparticles onto a target substrate. The same plasma can be used to change the properties of the printed material and even sinter in situ . In this work, we demonstrate one-step deposition of gold structures onto flexible and low-temperature substrates without the need for thermal or photonic post-processing. We also explore the plasma effect on the deposition of the gold nanoparticle ink. The plasma voltage is optimized for the sintering of the gold nanoparticles, and a simple procedure for manufacturing traces with increased adhesion and conductivity is presented, with a peak conductivity of 6.2 x10 5 S/m. PJP-printed gold LED interconnects and microheaters on flexible substrates are developed to demonstrate the potential of this single-step sintered deposition of conductive traces on low-temperature substrates. 
    more » « less
  2. Additive manufacturing has become a promising method for the fabrication of inexpensive, green, flexible electronics. Printed electronics on low-temperature substrates like paper are very appealing for the flexible hybrid electronics market for their use in disposable and biocompatible electronic applications and in areas like packaging, wearables, and consumer electronics. Plasma-jet printing uses a dielectric barrier discharge plasma to focus aerosolized nanoparticles onto a target substrate. The same plasma can be used to change the properties of the printed material and even sinter in situ. The technology can also be utilized in space and microgravity environments since the plasma-assisted deposition is independent of gravity. In this work, we show plasma voltage effect on deposition of gold nanoparticles and direct printing of flexible, conductive gold structures onto low-temperature paper substrates without the need for thermal or photonic post-processing. The effects of plasma parameters on the conductivity and flexible reliability of the printed films are studied, and a paper-based LED electrode is demonstrated. 
    more » « less
  3. Plasma jet printing is an emerging alternative to popular 2-D printing techniques, such as inkjet and aerosol jet printing. The inherent nature of the plasma provides films with good adhesion upon printing without the need for thermal sintering. The reduced logistics and the ability to print a wide range of materials on rigid and flexible substrates make it a valuable technique for printed and flexible electronics. In this tutorial article, we discuss the principles behind plasma printing, printer hardware, and printing mechanisms and provide representative print results. 
    more » « less
  4. Thermoelectric generators (TEGs) convert temperature differences into electrical power and are attractive among energy harvesting devices due to their autonomous and silent operation. While thermoelectric materials have undergone substantial improvements in material properties, a reliable and cost-effective fabrication method suitable for microgravity and space applications remains a challenge, particularly as commercial space flight and extended crewed space missions increase in frequency. This paper demonstrates the use of plasma-jet printing (PJP), a gravity-independent, electromagnetic field-assisted printing technology, to deposit colloidal thermoelectric nanoflakes with engineered nanopores onto flexible substrates at room temperature. We observe substantial improvements in material adhesion and flexibility with less than 2% and 11% variation in performance after 10 000 bending cycles over 25 mm and 8 mm radii of curvature, respectively, as compared to previously reported TE films. Our printed films demonstrate electrical conductivity of 2.5 × 10 3 S m −1 and a power factor of 70 μW m −1 K −2 at room temperature. To our knowledge, these are the first reported values of plasma-jet printed thermoelectric nanomaterial films. This advancement in plasma jet printing significantly promotes the development of nanoengineered 2D and layered materials not only for energy harvesting but also for the development of large-scale flexible electronics and sensors for both space and commercial applications. 
    more » « less
  5. Thermoelectric generators are being used as a successful power sources for space applications since 1960's in radioisotope-thermoelectric generators (RTGs) to supply power to space systems in deep space. RTG’s are capable of directly converting heat energy to uninterrupted electric power with no moving parts involved. The ability of thermoelectric materials to convert heat energy to electrical energy is defined by a dimensionless value known as the thermoelectric figure of merit (ZT) 1. This value quantifies the maximum thermoelectric efficiency of a thermoelectric generator (TEG) and is calculated by ZT= S2σT/κ, where S, σ, T, and κ represent Seebeck coefficient, electrical conductivity, temperature, and thermal conductivity, respectively. Among all of the thermoelectric materials, Bi2Te3 and its alloys have been reported to have high ZT values for low temperature energy harvesting and are highly suitable for powering wearables and self-powering sensors2, 3. 
    more » « less