Search for: All records

Convergent estuaries have been shortened by dam‐like structures worldwide. Here, we evaluate 31 long‐term water level stations and use a semi‐analytical tide model to investigate how landward‐funneling and a dam influence tidal and storm surge propagation in the greater Charleston Harbor region, South Carolina, where three rivers meet: the Ashley, Cooper, and Wando. Results show that the phase speed and amplification of the principal tidal harmonic (M2) is larger than other long waves such as storm surge (∼1–4 days) and setup‐setdown (∼4–10 days). Further landward, all waves attenuate, but, as they approach the dam on the Cooper River, a frequency dependent response in amplitude and phase progression occurs. A semi‐analytical tidal model shows that funneling and the presence of a dam amplify tidal waves through wave interference from partial and full reflection, respectively. The different phase progressions of the reflected waves interact with the incident wave to increase or decrease the summed overall wave amplitude. Using a friction‐convergence parameter space, we demonstrate that dominant tides in 23 estuaries and the tidal, storm surge, and setup‐setdown waves in the Cooper River can be delineated into three regimes that describe landward amplification or attenuation associated with funneling, a dam, or both. The regime of each tidal constituent is consistent but can change with the duration and height of each storm surge event; dam associated wave interference can attenuate long‐duration events, while the most intense events (short duration, high water) are amplified by dams more than funneling and greatly increase flood exposure.

Modeling transport, erosion, and deposition of nonuniform sediment over temporal intervals that are short compared to those characterizing channel bed aggradation and degradation remains an open problem due to the complex quantification of the sediment fluxes between the bed material load and the alluvial deposit. Parker, Paola, and Leclair in 2000 proposed a morphodynamic (PPL) framework to overcome this problem. This framework is used here to model the dispersal of a patch of gravel tracers in three different settings, a laboratory flume, a mountain creek, and a braided river. To simplify the problem, (a) the bed slope, bedload transport rate, and bed configuration are assumed to be constant in space and time (equilibrium), (b) sediment entrainment and deposition are modeled with a constant step length formulation, and (c) the PPL framework is implemented in a one‐dimensional (laterally averaged) model. Model validation against laboratory experiments suggests that, as the transport capacity of the flow increases, the maximum elevation‐specific density of sediment entrainment may migrate downward in the deposit. The comparison between model results and field data shows that the equilibrium solution can reasonably capture tracer dispersal. The equilibrium model can also reproduce subdiffusion and superdiffusion of a patch of tracers in the streamwise direction, depending on the magnitude of the short‐term bed level changes. Finally, the average tracer elevation in a cross‐section decreases in time because particles that are buried deep in the deposit are only rarely reentrained into bedload transport.

Floodplain inundation has been viewed as a type of binary process set by the relative elevation between river stage and levee crest. However, recent reports in the literature show that this perception may have limited applicability. In particular, through‐bank channels, conduits that cross the main river levees or banks, facilitate conditions for an “inundation continuum,” or inundation for a range of sub‐bankfull flows. Moreover, through‐bank channels and their networks provide a direct hydraulic connection between the main river and the floodplain interior. We analyzed through‐bank channel structure and floodplain topography and compared them to river surface elevation to provide greater insight on floodplain inundation processes. Results show that well‐developed levees with through‐bank channels facilitate frequent through‐bank inundation. Where levees are poorly developed, floodplain inundation occurs by overbank flow. Therefore, for a given discharge through‐bank and overbank inundation may occur simultaneously. For the Congaree River floodplain, we infer that this dichotomy of inundation processes leads to temporally and spatially complex inundation flow paths for a given river stage. Further, our analyses reveal that the inundation continuum concept should be considered in the context of having vertical, longitudinal, lateral, and temporal components.

Turbidity current and coastal storm deposits are commonly characterized by a basal sandy massive (structureless) unit overlying an erosional surface and underlying a parallel or cross‐laminated unit. Similar sequences have been recently identified in fluvial settings as well. Notwithstanding field, laboratory and numerical studies, the mechanisms for emplacement of these massive basal units are still under debate. It is well accepted that the sequence considered here can be deposited by waning‐energy flows, and that the parallel‐laminated units are deposited under transport conditions corresponding to upper plane bed at the dune–antidune transition. Thus, transport conditions that are more intense than those at the dune–antidune transition should deposit massive units. This study presents experimental, open‐channel flow results showing that sandy massive units can be the result of gradual deposition from a thick bedload layer of colliding grains called sheet flow layer. When this layer forms with relatively coarse sand, the non‐dimensional bed shear stress associated with skin friction, the Shields number, is larger than a threshold value approximately equal to 0·4. For values of the Shields number smaller than 0·4 the sheet flow layer disappeared, sediment was transported by a standard bedload layer one or two grain diameters thick, and the bed configuration was characterized by downstream migrating antidunes and washed out dunes. Parallel laminae were found in deposits emplaced with standard bedload transport demonstrating that the same dilute flow can gradually deposit the basal and the parallel‐laminated unit in presence of traction at the depositional boundary. Further, the experiments suggested that two different types of upper plane bed conditions can be defined, one associated with standard bedload transport at the dune–antidune transition, and the other associated with bedload transport in sheet flow mode at the transition between upstream and downstream migrating antidunes.