Search for: All records

Hybrid organic–inorganic perovskites enable the production of semiconductor devices at low cost from solution processing. Their remarkable structural versatility offers unique and diverse physical properties, leading to their incorporation in a wide variety of applications. One major limitation is the significant negative environmental impact associated with developing perovskite devices; common solvents used in perovskite film deposition are highly toxic, which represents a barrier to the transfer to an industrial setting of the perovskite technology. Here we report on the fabrication and characterisation of the first laser printed organic–inorganic perovskite films. The method is solvent-free, scalable and low-cost, allowing fast deposition over large areas and with minimal material waste. We show that the laser printed perovskite films are crystalline and exhibit electrical properties on par with single crystals, despite the fact that the microstructure consists of randomly oriented crystallites. The toner used during printing is designed for optimal film transfer and the vertical separation of its components results in a segregation of the perovskite film in the middle of the stack, therefore also encapsulating the perovskite layer, a process that yields a remarkable resilience to defect formation upon environmental exposure.

 

Organic semiconductors (OSCs) have shown great promise in a variety of applications. Although solution processing of OSCs has resulted in high‐quality films, exquisite control of structural development to minimize defect formation during large‐scale fabrication remains formidable. Compounding this challenge is the use of halogenated organic solvents, which poses significant health and environmental hazards. However, the solvent‐free techniques introduced thus far impose additional limitations on solidification kinetics; the resulting OSC thin films are often more defective than those processed from solution. Here, a solvent‐free technique is reported to prepare OSC membranes with centimetric crystalline domains. Leveraging the tendency for liquid crystalline materials to preferentially orient, OSCs are “prealigned” by depositing them from the melt over a metal frame to form a freely suspended membrane. Crystallization from this prealigned phase affords membranes with unprecedented structural order across macroscopic distances. Field‐effect transistors comprising membranes of dioctyl[1]‐benzothieno[3,2‐b][1]benzothiophene (C8BTBT) and didodecyl[1]‐benzothieno[3,2‐b][1]benzothiophene (C12BTBT) having centimeter‐sized domains as active layers exhibit a hole mobility of ≈8.6 cm²V⁻¹s⁻¹, superseding the mobility of any transistors whose active layers are deposited from melt. This technique is scalable to yield membranes with large crystalline domains over wafer dimensions, making it amenable for broad applications in large‐area organic electronics.

 

The mechano‐electrical properties of poly(3‐hexylthiophene) thin films are investigated as a function of their tie‐chain content. Tie chains play an indispensable role in enabling strain‐induced structural alignment and charge‐transport enhancement in the strain direction. In the absence of sufficient tie chains, the external mechanical force cannot induce any significant polymer backbone alignment locally or crystallite reorientation at the mesoscale. These samples instead undergo brittle fracture on deformation, with cracks forming normal to the direction of strain; charge transport in this direction is hindered as a consequence. This mechanistic insight on strain alignment points to the promise of leveraging tie‐chain fraction as a practical tuning knob for effecting the mechano‐electrical properties in conjugated polymer systems.

 

Typical lead‐based perovskites solar cells show an onset of photogeneration around 800 nm, leaving plenty of spectral loss in the near‐infrared (NIR). Extending light absorption beyond 800 nm into the NIR should increase photocurrent generation and further improve photovoltaic efficiency of perovskite solar cells (PSCs). Here, a simple and facile approach is reported to incorporate a NIR‐chromophore that is also a Lewis‐base into perovskite absorbers to broaden their photoresponse and increase their photovoltaic efficiency. Compared with pristine PSCs without such an organic chromophore, these solar cells generate photocurrent in the NIR beyond the band edge of the perovskite active layer alone. Given the Lewis‐basic nature of the organic semiconductor, its addition to the photoactive layer also effectively passivates perovskite defects. These films thus exhibit significantly reduced trap densities, enhanced hole and electron mobilities, and suppressed illumination‐induced ion migration. As a consequence, perovskite solar cells with organic chromophore exhibit an enhanced efficiency of 21.6%, and substantively improved operational stability under continuous one‐sun illumination. The results demonstrate the potential generalizability of directly incorporating a multifunctional organic semiconductor that both extends light absorption and passivates surface traps in perovskite active layers to yield highly efficient and stable NIR‐harvesting PSCs.

 

To accelerate materials discovery, computational methods such as inverse materials design have been proposed to predict the properties of target compounds of interest for specific applications. This in silico process can be used to guide subsequent synthesis and characterization. Inverse design is especially relevant for the field of organic molecules, for which there are nearly infinite synthetic modifications possible. With a target application of UV-absorbing, visibly transparent solar cells in mind, we calculated the orbital and transition energies of over 360 possible coronene derivatives. Our screening, or the constraints we imposed on the calculated series, resulted in the selection of three new derivatives, namely contorted pentabenzocoronene (cPBC), contorted tetrabenzocoronene (cTBC), and contorted tetrabenzofuranylbenzocoronene (cTBFBC) for synthesis and characterization. Our materials characterization found agreement between our calculated and experimental energy values, and through testing of these materials in organic photovoltaic (OPV) devices, we fabricated solar cells with an open-circuit voltage of 1.84 V and an average visible transparency of 88% of the active layer; both quantities exceed previous records for visibly transparent coronene-based solar cells. This work highlights the promise of inverse materials design for future materials discovery, as well as improvements to an exciting application of UV-targeted solar cells. 

While typical perovskite solar cells (PSCs) with doped Spiro-OMeTAD as a hole transport material (HTM) have shown rapid increase in their power-conversion efficiencies (PCEs), their poor stability remains a big concern as the dopants and additives used with Spiro-OMeTAD have a strong tendency to diffuse into and degrade the perovskite active layer under normal operating conditions. Aiming to push forward the development of PSCs, many dopant-free small-molecular HTMs have been reported based on energetic considerations for charge transfer and criteria for charge transport. However, the PCEs of the state-of-the-art PSCs with dopant-free small-molecular HTMs are still inferior to those using doped Spiro-OMeTAD, and little attention has been paid to the interactions between the HTM and perovskite absorber in PSCs. Here, we report a facile design concept to functionalize HTMs so that they can passivate perovskite surface defects and enable perovskite active layers with lower density of surface trap states and more efficient charge transfer to the hole transport layer. As a consequence, perovskite solar cells with a functionalized HTM exhibit a champion PCE of 22.4%, the highest value for PSCs using dopant-free small molecular HTMs to date, and substantively improved operational stability under continuous illumination. With a T 80 of (1617 ± 7) h for encapsulated cells tested at 30 °C in air, the PSCs containing the functionalized HTM are among the most stable PSCs using dopant-free small-molecular HTMs. The effectiveness of our strategy is demonstrated in PSCs comprising both a state-of-the-art MA-free perovskite and MAPbI, a system having more surface defects, and implies the potential generality of our strategy for a broad class of perovskite systems, to further advance highly efficient and stable solar cells.