An official website of the United States government
Abstract Visibly transparent luminescent solar concentrators (TLSC) can optimize both power production and visible transparency by selectively harvesting the invisible portion of the solar spectrum. Since the primary applications of TLSCs include building envelopes, greenhouses, automobiles, signage, and mobile electronics, maintaining aesthetics and functionalities is as important as achieving high power conversion efficiencies (PCEs) in practical deployment. In this work, massive‐downshifting phosphorescent nanoclusters and fluorescent organic molecules are combined into a TLSC system as ultraviolet (UV) and near‐infrared (NIR) selective‐harvesting luminophores, respectively, demonstrating UV and NIR dual‐band selective‐harvesting TLSCs with PCE over 3%, average visible transmittance (AVT) exceeding 75% and color metrics suitable for the window industry. With distinct wavelength‐selectivity and effective utilization of the invisible portion of the solar spectrum, this work reports the highest light utilization efficiency (PCE × AVT) of 2.6 for a TLSC system, the highest PCE of any transparent photovoltaic (TPV) devices with AVT greater than 70%, and outperforms the practical limit for non‐wavelength‐selective TPV.
more »
« less
Coronene derivatives for transparent organic photovoltaics through inverse materials design
To accelerate materials discovery, computational methods such as inverse materials design have been proposed to predict the properties of target compounds of interest for specific applications. This in silico process can be used to guide subsequent synthesis and characterization. Inverse design is especially relevant for the field of organic molecules, for which there are nearly infinite synthetic modifications possible. With a target application of UV-absorbing, visibly transparent solar cells in mind, we calculated the orbital and transition energies of over 360 possible coronene derivatives. Our screening, or the constraints we imposed on the calculated series, resulted in the selection of three new derivatives, namely contorted pentabenzocoronene (cPBC), contorted tetrabenzocoronene (cTBC), and contorted tetrabenzofuranylbenzocoronene (cTBFBC) for synthesis and characterization. Our materials characterization found agreement between our calculated and experimental energy values, and through testing of these materials in organic photovoltaic (OPV) devices, we fabricated solar cells with an open-circuit voltage of 1.84 V and an average visible transparency of 88% of the active layer; both quantities exceed previous records for visibly transparent coronene-based solar cells. This work highlights the promise of inverse materials design for future materials discovery, as well as improvements to an exciting application of UV-targeted solar cells.
more »
« less
- Award ID(s):
- 1824674
- PAR ID:
- 10294410
- Date Published:
- Journal Name:
- Journal of Materials Chemistry C
- Volume:
- 9
- Issue:
- 4
- ISSN:
- 2050-7526
- Page Range / eLocation ID:
- 1310 to 1317
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.more » « less
-
To address the critical issues in solar energy, the current research has focused on developing advanced solar harvesting materials that are low cost, lightweight, and environmentally friendly. Among many organic photovoltaics (PVs), the porphyrin compounds exhibit unique structural features that are responsible for strong ultraviolet (UV) and near infrared absorptions and high average visible transmittance, making them ideal candidates for solar-based energy applications. The porphyrin compounds have also been found to exhibit strong photothermal (PT) effects and recently applied for optical thermal insulation of building skins. These structural and optical properties of the porphyrin compounds enable them to function as a PT or a PV device upon sufficient solar harvesting. It is possible to develop a transparent porphyrin thin film with PT- and PV-dual-modality for converting sunlight to either electricity or thermal energy, which can be altered depending on energy consumption needs. A building skin can be engineered into an active device with the PT- and PV-dual modality for large-scale energy harvesting, saving, and generation. This review provides the current experimental results on the PT and PV properties of the porphyrin compounds such as chlorophyll and chlorophyllin. Their PT and PV mechanisms are discussed in correlations to their electronic structures. Also discussed are the synthesis routes, thin film deposition, and potential energy applications of the porphyrin compounds.more » « less
-
Photovoltaic solar cells have been extensively used for various applications and are considered one of the most efficient green energy sources. However, their 2D surface area solar harvesting has limitations, and there is an increasing need to explore the possibility of multiple layer solar harvest for enhanced energy density. To address this, we have developed spectral-selective transparent thin films based on porphyrin and iron oxide compounds that allow solar light to penetrate multiple layers, significantly increasing solar harvesting surface area and energy density. These thin films are designed as photovoltaic (PV) and photothermal (PT) panels that can convert photons into either electricity or thermal energy for various green energy applications, such as smart building skins and solar desalination. The advantages of this 3D solar harvesting system include enlarged solar light collecting surface area and increased energy density. The multilayer system transforms the current 2D to 3D solar harvesting, enabling efficient energy generation. This review discusses recent developments in the synthesis and characterization of PV and PT transparent thin films for solar harvesting and energy generation using multilayers. Major applications of the 3D solar harvesting system are reviewed, including thermal energy generation, multilayered DSSC PV system, and solar desalination. Some preliminary data on transparent multilayer DSSC PVs are presented.more » « less
-
The discovery of functional dye materials with superior optical properties is crucial for advancing technologies in biomedical imaging, organic photovoltaics, and quantum information systems. Recent advancements highlight the need to accelerate this discovery process by integrating computational strategies with experimental methods. In this regard, we have employed a computational approach to explore the latent space of dye materials, utilizing swarm optimization techniques to efficiently navigate complex chemical spaces and identify optimal values of molecular properties using machine learning methods based on target properties, such as high extinction coefficients ($$\varepsilon$$). The latent space based evaluation outperformed all available features of a domain. This approach enhances inverse material design by systematically correlating molecular parameters with desired optical characteristics by implementing VAEs. In this process, by defining target properties as inputs, the model effectively determines the key molecular features necessary for engineering high-performance dye compounds.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D0TC05092J
