Search for: All records

Abstract The emergence of the SARS‐CoV‐2 pandemic and airborne particulate matter (PM) pollution has led to remarkably high demand for face masks. However, conventional respirators are intended for single use and made from nondegradable materials, causing serious concern for a plastic‐waste environmental crisis. Furthermore, these facemasks are weakened in humid conditions and difficult to decontaminate. Herein, a reusable, self‐sustaining, highly effective, and humidity‐resistant air filtration membrane with excellent particle‐removal efficiency is reported, based on highly controllable and stable piezoelectric electrospun poly (l‐lactic acid) (PLLA) nanofibers. The PLLA filter possesses a high filtration efficiency (>99% for PM 2.5 and>91% for PM 1.0) while providing a favorable pressure drop (≈91 Pa at normal breathing rate) for human breathing due to the piezoelectric charge naturally activated by respiration through the mask. The filter has a long, stable filtration performance and good humidity resistance, demonstrated by a minimal declination in the filtration performance of the nanofiber membrane after moisture exposure. The PLLA filter is reusable via common sterilization tools (i.e., an ultrasonic cleaning bath, autoclave, or microwave). Moreover, a prototype of a completely biodegradable PLLA nanofiber‐based facemask is fabricated and shown to decompose within 5 weeks in an accelerated degradation environment. 

The halide perovskite TiF₃, renowned for its intricate interplay between structure, electronic correlations, magnetism, and thermal expansion, is investigated. Despite its simple structure, understanding its low‐temperature magnetic behavior has been a challenge. Previous theories propose antiferromagnetic ordering. In contrast, experimental signatures for an ordered magnetic state are absent down to 10 K. The current study has successfully reevaluated the theoretical modeling of TiF₃, unveiling the significance of strong electronic correlations as the key driver for its insulating behavior and magnetic frustration. In addition, frequency‐dependent optical reflectivity measurements exhibit clear signs of an insulating state. The analysis of the calculated magnetic data gives an antiferromagnetic exchange coupling with a net Weiss temperature of order 25 K as well as a magnetic response consistent with aS = 1/2 local moment per Ti³⁺. Yet, the system shows no susceptibility peak at this temperature scale and appears free of long‐range antiferromagnetic order down to 1 K. Extending ab initio modeling of the material to larger unit cells shows a tendency for relaxing into a noncollinear magnetic ordering, with a shallow energy landscape between several magnetic ground states, promoting the status of this simple, nearly cubic perovskite structured material as a candidate spin liquid. 

We characterize perovskite TiF3, a material which is reported to display significant negative thermal expansion at elevated temperatures above its cubic-to-rhombohedral structural phase transition at 330 K. We find the optical response favors an insulating state in both structural phases, which we show can be produced in density functional theory calculations only through the introduction of an on-site Coulomb repulsion. Analysis of the magnetic susceptibility data gives a S = 21 local moment per Ti+3 ion and an antiferromagnetic exchange coupling. Together, these results show that TiF3 is a strongly correlated electron system, a fact which constrains possible mechanisms of strong negative thermal expansion in the Sc1−x Tix F3 system. We consider the relative strength of the Jahn-Teller and electric dipole interactions in driving the structural transition. 

We address new measurement challenges relating to 3D printing in metal powder using the powder bed fusion technique. Using a combination of confocal microscopy principles and fast, sensitive mid-infrared collection techniques, we present a compact and versatile method of measuring and analyzing broadband thermal emissions from the vicinity of the molten metal pool during the additive manufacturing process. We demonstrate the benefits of this instrumentation and potential for scientific research as well as in situ monitoring. Our compact microscope collection optics can be implemented in various powder bed fusion machines under vacuum or inert atmospheric environments to enable extensions such as multi-color pyrometry or spectroscopic studies of additive manufacturing processes. 

Strain solitons have been observed statically in several 2D materials and dynamically in substrate materials using ultrafast laser pulses. The latter case relies on lattice relaxation in response to ultrafast heating in a light-absorbing transducer material, a process which is sensitive to the thermal expansion coefficient. Here we consider an unusual case where the sign of the thermal expansion coefficient is negative, a scenario which is experimentally feasible in light of rapid and recent advances in the discovery of negative thermal expansion materials. We present numerical solutions to a nonlinear differential equation which has been repeatedly demonstrated to quantitatively model experimental data and discuss the salient results using realistic parameters for material linear and nonlinear elasticity. The solitons that emerge from the initial value problem with negative and positive thermal expansion are qualitatively different in several ways. The new case of negative thermal expansion gives rise to a nearly-periodic soliton train with chirped profile and free of an isolated shock front. We suggest this unanticipated result may be realized experimentally and assess the potential for certain applications of this generic effect.