skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Protecting analog circuits with parameter biasing obfuscation
A methodology to secure analog intellectual property (IP) by obfuscating biasing conditions is presented in this paper. Previous research methodologies have focused on protecting digital IP from theft, overproduction, counterfeiting, and Trojan insertion. Analog IP has not been investigated as it does not share the same replicated structures and functionalities used for digital protection. The bias encryption techniques presented in this paper are implemented on a phase locked loop (PLL). The operating frequency of the PLL is masked in the range of 800 MHz to 2.2 GHz with a 40-bit encryption key. The probability of determining the correct key through brute force attack is 9.095×10-13. The overheads of encrypting the PLL include a 6.3% increase in active area, a 0.89% increase in power consumption, and a 5 dBc/Hz increase in phase noise.  more » « less
Award ID(s):
1648878
PAR ID:
10040252
Author(s) / Creator(s):
;
Date Published:
Journal Name:
2017 IEEE Latin American Test Symposium (LATS)
Page Range / eLocation ID:
1 to 6
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, IEEE Journal of Solid-State Circuits)
    null (Ed.)
    Although digital phase-locked loops (PLLs) offer several advantages over their analog counterparts, they suffer from a major disadvantage that is rarely mentioned in published articles. The disadvantage, known as spectral breathing, is caused by component mismatches among the frequency control elements within a PLL's digitally controlled oscillator (DCO). The mismatches introduce DCO frequency modulation nonlinearity which fluctuates and, therefore, causes erratic variations in the PLL's measured phase noise spectrum as the DCO's free-running frequency drifts. The phenomenon is called spectral breathing because the measured phase noise spectrum tends to slowly swell and contract over time as if taking breaths of air. During these breaths, the PLL's phase noise often becomes severely degraded. This article presents an experimental demonstration of the spectral breathing phenomenon and its solution in a digital fractional-N PLL. The demonstrated solution is a multi-rate dynamic element matching technique and a mismatch-noise cancellation technique that together eliminate spectral breathing. 
    more » « less
  2. ; ; (, ACM Transactions on Reconfigurable Technology and Systems)
    Current IP encryption methods offered by FPGA vendors use an approach where the IP is decrypted during the CAD flow, and remains unencrypted in the bitstream. Given the ease of accessing modern bitstream-to-netlist tools, encrypted IP is vulnerable to inspection and theft from the IP user. While the entire bitstream can be encrypted, this is done by the user, and is not a mechanism to protect confidentiality of 3rd party IP. In this work we present a design methodology, along with a proof-of-concept tool, that demonstrates how IP can remain partially encrypted through the CAD flow and into the bitstream. We show how this approach can support multiple encryption keys from different vendors, and can be deployed using existing CAD tools and FPGA families. Our results document the benefits and costs of using such an approach to provide much greater protection for 3rd party IP. 
    more » « less
  3. ; (, IEEE International Asia Pacific Conference on Circuits and Systems)
    In this paper, an approach is described for enhancing the security of analog circuits using Satisfiability Modulo theory (SMT) based design space exploration. The technique takes as inputs generic circuit equations and performance constraints and, by exhaustively exploring the design space, outputs transistor sizes that satisfy the given constraints. The analog satisfiability (aSAT) methodology is applied to parameter biasing obfuscation, where the width of a transistor is obfuscated to mask circuit properties, while also limiting the number of keys that produce the target performance requirements. The proposed methodology is used in the design of a differential amplifier and a two stage amplifier. The widths determined through aSAT analysis are shown to meet the gain, phase margin, and power consumption requirements for both a differential amplifier and a two-stage amplifier. However, a 7 MHz offset in the gain-bandwidth of the two-stage amplifier is observed from the target value of 30 MHz. The total gain of the two stage amplifier is masked with a 24 bit encryption key that results in a probability of 5.96x10-08 to determine the correct key. The simulated results indicate that the proposed analog design methodology quickly and accurately determines transistor sizes for target specifications, while also accounting for obfuscation of analog circuit parameters. 
    more » « less
  4. (, International Conference on Neuromorphic Systems (ICONS))
    On-chip learning with compute-in-memory (CIM) paradigm has become popular in machine learning hardware design in the recent years. However, it is hard to achieve high on-chip learning accuracy due to the high nonlinearity in the weight update curve of emerging nonvolatile memory (eNVM) based analog synapse devices. Although digital synapse devices offer good learning accuracy, the row-by-row partial sum accumulation leads to high latency. In this paper, the methods to solve the aforementioned issues are presented with a device-to-algorithm level optimization. For analog synapses, novel hybrid precision synapses with good linearity and more advanced training algorithms are introduced to increase the on-chip learning accuracy. The latency issue for digital synapses can be solved by using parallel partial sum read-out scheme. All these features are included into the recently released MLP + NeuroSimV3.0, which is an in-house developed device-to-system evaluation framework for neuro-inspired accelerators based on CIM paradigm. 
    more » « less
  5. ; ; (, IEEE International Conference on Rebooting Computing)
    Implementing scalable and effective synaptic networks will enable neuromorphic computing to deliver on its promise of revolutionizing computing. RRAM represents the most promising technology for realizing the fully connected synapse network: By using programmable resistive elements as weights, RRAM can modulate the strength of synapses in a neural network architecture. Oscillatory Neural Networks (ONNs) that are based on phase-locked loop (PLL) neurons are compatible with the resistive synapses but otherwise rather impractical. In this paper, A PLL-free ONN is implemented in 28 nm CMOS and compared to its PLL-based counterpart. Our silicon results show that the PLL-free architecture is compatible with resistive synapses, addresses practical implementation issues for improved robustness, and demonstrates favorable energy consumption compared to state-of-the-art NNs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email