skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Thermo-mechanically responsive crystalline organic cantilever
We report thermo-mechanically responsive and thermochromic behavior in the single crystalline organic semiconductor butoxyphenyl N -substituted naphthalene diimide (BNDI). We show that initially monoclinic single crystals of BNDI undergo a single-crystal to single-crystal transition to a triclinic phase. This transition accompanies large changes in the crystal packing, a visible decrease in crystal size, reversible thermochromic behavior, and motion including bending, jumping, and splitting. We have shown that by fixing single crystals to a surface, we can harness the energy of the phase transition to create a single crystal cantilever capable of lifting weights with masses nigh two orders of magnitude heavier than the single crystal itself.  more » « less
Award ID(s):
1654405
PAR ID:
10046361
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Chem. Commun.
Volume:
53
Issue:
71
ISSN:
1359-7345
Page Range / eLocation ID:
9890 to 9893
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Herein, we communicate that altering the number of carbon atoms on the alkoxyphenyl substituent in naphthalene diimides results in tunable thermo-salient behavior across a variety of temperatures. Additionally, these compounds were found to display reversible thermochromic behavior in the single crystalline state. We analyzed this behavior using differential scanning calorimetry (DSC), single crystal X-ray diffraction (SXRD), powder XRD (PXRD), and hot-stage microscopy. The heptoxyphenyl-, octoxyphenyl-, and nonoxyphenyl-derivatives exhibited “acrobatic” behavior—namely, bending, jumping, and splitting—upon an irreversible phase transition. This study contributes to a developing paradigm in the understanding of certain naphthalene diimide single crystals that the energy associated with irreversible phase transitions has the potential to perform mechanical work, and that the temperature at which this energy can be fine-tuned by selecting an appropriate alkoxyphenyl substituent. Furthermore, we show that these thermochromic NDI derivatives can be incorporated into commercially-available, polymeric 3D printing materials and the resulting printed mixed polymer-crystalline objects still exhibit thermochromic behavior after incorporation. 
    more » « less
  2. null (Ed.)
    Cholesteryl ester liquid crystals exhibit thermochromic properties related to the existence of a twisted nematic phase. We formulate ternary mixtures of cholesteryl benzoate (CB), cholesteryl pelargonate (CP), and cholesteryl oleyl carbonate (COC) to achieve thermochromic behavior. We aim to achieve thermochromic fibers by incorporating the liquid crystal formulations into electrospun fibers. Two methods of incorporating the liquid crystal (LC) are compared: (1) blend electrospinning and (2) coaxial electrospinning using the same solvent system for the liquid crystal. For blend electrospinning, intermolecular interactions seem to be important in facilitating fiber formation since addition of LC can suppress bead formation. Coaxial electrospinning produces fibers with higher nominal fiber production rates (g/hr) and with higher nominal LC content in the fiber (wt. LC/wt. polymer assuming all of the solvent evaporates) but larger fiber size distributions as quantified by the coefficient of variation in fiber diameter than blend electrospinning with a single nozzle. Importantly, our proof-of-concept experiments demonstrate that coaxially electrospinning with LC and solvent in the core preserves the thermochromic properties of the LC so that thermochromic fibers are achieved. 
    more » « less
  3. The melting behavior of Ruddlesden-Popper type hybrid improper ferroelectric Sr3Zr2O7 phase in the ZrO2–SrO pseudo-binary system was investigated, and its single crystals were successfully grown. A series of the slowcooling floating zone experiments revealed that Sr3Zr2O7 melts incongruently into SrZrO3 phase and a liquid and that the compositional range where Sr3Zr2O7 and a liquid coexist is located around 70 mol% SrO composition. Based on the results, we attempted to grow Sr3Zr2O7 single crystals by the traveling solvent floating zone method using SrO-excess solvent and feed. Consequently, many small single crystals of Sr3Zr2O7 phase with several millimeters in size were discovered in the as-grown boules covered with SrO phase. The phase transition behavior of the grown crystals was investigated by differential thermal analysis with polarizing optical microscopy as well as by optical second harmonic generation measurements. We directly observed a reconstruction of orthorhombic twin domains in Sr3Zr2O7 single crystals accompanied by the first-order ferroelectric transition at about 410 ◦C. 
    more » « less
  4. We present the combined results of single crystal X-ray diffraction, physical properties characterization, and theoretical assessment of EuSnP under high pressure. Single crystals of EuSnP prepared using Sn self-flux crystallize in the tetragonal NbCrN-type crystal structure (S.G. P 4/ nmm ) at ambient pressure. Previous studies have shown that for Eu ions, seven unpaired electrons impart a 2+ oxidation state. Assuming the oxidation states of Eu to be +2 and P to be −3, each Sn will donate one electron, with one p valence electron left for forming a weak Sn–Sn bond. According to the high-pressure single crystal X-ray diffraction measurements, no structural phase transition was observed up to ∼6.2 GPa. Temperature-dependent resistivity measurements up to 2.15 GPa on single crystals indicate that the phase-transition temperature occurring at the Néel temperature ( T N ) is significantly enhanced under high pressure. The robust crystallography and enhanced antiferromagnetic transition temperatures can be rationalized by the electronic structure calculations and chemical bonding analysis. The increasing Eu–P bonding interaction is consistent with the lattice parameter changing and enhanced T N . Moreover, the molecular orbital diagram shows that the weak Sn–Sn bond can be squeezed under pressure, acting as a compression buffer to stabilize the structure. 
    more » « less
  5. Abstract Time-resolved studies of biomacromolecular crystals have been limited to systems involving only minute conformational changes within the same lattice. Ligand-induced changes greater than several angstroms, however, are likely to result in solid-solid phase transitions, which require a detailed understanding of the mechanistic interplay between conformational and lattice transitions. Here we report the synchronous behavior of the adenine riboswitch aptamer RNA in crystal during ligand-triggered isothermal phase transitions. Direct visualization using polarized video microscopy and atomic force microscopy shows that the RNA molecules undergo cooperative rearrangements that maintain lattice order, whose cell parameters change distinctly as a function of time. The bulk lattice order throughout the transition is further supported by time-resolved diffraction data from crystals using an X-ray free electron laser. The synchronous molecular rearrangements in crystal provide the physical basis for studying large conformational changes using time-resolved crystallography and micro/nanocrystals. 
    more » « less