- Award ID(s):
- 1637258
- PAR ID:
- 10075443
- Date Published:
- Journal Name:
- 2017 13th IEEE Conference on Automation Science and Engineering (CASE)
- Page Range / eLocation ID:
- 888 to 893
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
With commercial and residential buildings accounting for approximately 40% of the energy and 70% of the electricity consumption in the United States, there are substantial opportunities to improve energy efficiency in these buildings. Similarly, buildings also account for the large majority of electricity demand, particularly during peak use hours. As the electric grid becomes increasingly supported by renewable energy, buildings are ideal for supporting demand-side management, allowing for the electricity demand to meet the variable levels of electricity supply. Integrated controls of various building energy system components, including HVAC (Heating Ventilation and Air Conditioning), lighting, and shading devices, combined with advanced sensor and control technologies, can help to optimize system operations. This research aims to study the impact of integrated HVAC, lighting, and shading device controls, to estimate energy and demand saving in typical small office buildings in the U.S. This is achieved through a multi-step modeling process, including daylight simulation using Radiance to evaluate available daylight for each zone, then EnergyPlus to develop and implement various controls and estimate energy and demand savings using the Radiance results as input. The result of this work provides insights for a variety of stakeholders in the building, utility and grid operator industries and quantifies the potential benefit of integrated systems.more » « less
-
Thermal comfort and energy efficiency are always the two most significant objectives in HVAC operations. However, for conventional HVAC systems, the pursuit of high energy efficiency may be at the expense of satisfactory thermal comfort. Therefore, even if centralized HVAC systems nowadays have higher energy efficiency than before in office buildings, most of them cannot adapt the dynamic occupant behaviors or individual thermal comfort. In order to realize high energy efficiency while still maintain satisfactory thermal environment for occupants indoors, the integrated hybrid HVAC system has been developed for years such as task-ambient conditioning system. Moreover, the occupant-based HVAC control system such as human- in-the-loop has also been investigated so that the system can be adaptive based on occupant behaviors. However, most of research related to personalized air-conditioning system only focuses on field-study with limited scale (i.e. only one office room), this paper has proposed a co- simulation model in energyplus to simulate the hybrid cooling system with synthetic thermal comfort distributions based on global comfort database I&II. An optimization framework on cooling set-point is proposed with the objective of energy performance and the constraints of thermal comfort distribution developed by unsupervised Gaussian mixture model (GMM) clustering and kernel density estimation (KDE). The co-simulation results have illustrated that with the proposed optimization algorithm and the hybrid cooling system, HVAC demand power has decreased 5.3% on average with at least 90% of occupants feeling satisfied.more » « less
-
null (Ed.)Frequency regulation is crucial for balancing the supply and demand of modern electricity grids. To provide regulation services, it is important to understand the capability of flexible resources to track regulation signals. This paper studies the problem of submitting capacity bids to a forward regulation market based on historical regulation signals. We consider an aggregator who manages a group of flexible resources with linear dynamic constraints. He seeks to find the optimal capacity bid, so that real-time regulation signals can be followed with an arbitrary guaranteed probability. We formulate this problem as a chance-constrained program with unknown regulation signal distributions. A sampling and discarding algorithm is proposed. It provably provides near-optimal solutions at a guaranteed probability of success without knowing the distribution of the regulation signals. This result holds for resources with arbitrary linear dynamics and allows arbitrary intra-hour data correlations. We validate the proposed algorithm with real data via numerical simulations. Two cases are studied: (1) CAISO market, where providers separately submit capacity estimates for regulation up and regulation down signals, (2) PJM market, where regulation up and down capacities are the same. Simulation results show that the proposed algorithm provides near-optimal capacity estimates for both cases.more » « less
-
In recent years, the focus has been on enhancing user comfort in commercial buildings while cutting energy costs. Efforts have mainly centered on improving HVAC systems, the central control system. However, it’s evident that HVAC alone can’t ensure occupant comfort. Lighting, blinds, and windows, often overlooked, also impact energy use and comfort. This paper introduces a holistic approach to managing the delicate balance between energy efficiency and occupant comfort in commercial buildings. We present
OCTOPUS , a system employing a deep reinforcement learning (DRL) framework using data-driven techniques to optimize control sequences for all building subsystems, including HVAC, lighting, blinds, and windows.OCTOPUS ’s DRL architecture features a unique reward function facilitating the exploration of tradeoffs between energy usage and user comfort, effectively addressing the high-dimensional control problem resulting from interactions among these four building subsystems. To meet data training requirements, we emphasize the importance of calibrated simulations that closely replicate target-building operational conditions. We trainOCTOPUS using 10-year weather data and a calibrated building model in the EnergyPlus simulator. Extensive simulations demonstrate thatOCTOPUS achieves substantial energy savings, outperforming state-of-the-art rule-based and DRL-based methods by 14.26% and 8.1%, respectively, in a LEED Gold Certified building while maintaining desired human comfort levels. -
null (Ed.)By arbitraging among consumer comfort margins, buildings energy consumption can be changed by providing flexibility to grids. To manipulate the buildings energy consumption, a new contract-based approach to for multi-zone building heating, ventilation and air-conditioning (HVAC) systems is proposed. The approach includes the real-time markets by changing buildings optimal consumption pattern based on triggers sent by the aggregator. Also to decrease the energy consumption of buildings, the user is allowed to select the time-slots and rewards are provided to the user for aggregating flexibility. The aggregator bundles flexibility from the buildings at different time-slots and sells in real-time markets. The idea in aggregator's problem is to maximize aggregator's profits by selling flexibility in real-time markets (RTM) while ensuring the provisioning of flexibility from the buildings through incentives. To address this problem, we formulate it as a distributed optimization problem and then provide a method to solve it which provides good scalability, a requirement for large commercial buildings with multiple zones to participate in RTM. We illustrate the scalability and performance of the contract-based approach and solution technique in a building with 200 zones. Also, user participation based on their time-preferences is included in the proposed optimization. Finally, a scalable technique is shown which can be adopted in existing building automation systems.more » « less