An official website of the United States government
Abstract 3D structures that incorporate high‐performance electronic materials and allow for remote, on‐demand 3D shape reconfiguration are of interest for applications that range from ingestible medical devices and microrobotics to tunable optoelectronics. Here, materials and design approaches are introduced for assembly of such systems via controlled mechanical buckling of 2D precursors built on shape‐memory polymer (SMP) substrates. The temporary shape fixing and recovery of SMPs, governed by thermomechanical loading, provide deterministic control over the assembly and reconfiguration processes, including a range of mechanical manipulations facilitated by the elastic and highly stretchable properties of the materials. Experimental demonstrations include 3D mesostructures of various geometries and length scales, as well as 3D aquatic platforms that can change trajectories and release small objects on demand. The results create many opportunities for advanced, programmable 3D microsystem technologies.
more »
« less
Freestanding 3D Mesostructures, Functional Devices, and Shape‐Programmable Systems Based on Mechanically Induced Assembly with Shape Memory Polymers
Abstract Capabilities for controlled formation of sophisticated 3D micro/nanostructures in advanced materials have foundational implications across a broad range of fields. Recently developed methods use stress release in prestrained elastomeric substrates as a driving force for assembling 3D structures and functional microdevices from 2D precursors. A limitation of this approach is that releasing these structures from their substrate returns them to their original 2D layouts due to the elastic recovery of the constituent materials. Here, a concept in which shape memory polymers serve as a means to achieve freestanding 3D architectures from the same basic approach is introduced, with demonstrated ability to realize lateral dimensions, characteristic feature sizes, and thicknesses as small as ≈500, 10, and 5 µm simultaneously, and the potential to scale to much larger or smaller dimensions. Wireless electronic devices illustrate the capacity to integrate other materials and functional components into these 3D frameworks. Quantitative mechanics modeling and experimental measurements illustrate not only shape fixation but also capabilities that allow for structure recovery and shape programmability, as a form of 4D structural control. These ideas provide opportunities in fields ranging from micro‐electromechanical systems and microrobotics, to smart intravascular stents, tissue scaffolds, and many others.
more »
« less
- Award ID(s):
- 1635443
- PAR ID:
- 10078364
- Author(s) / Creator(s):
- ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; more »
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 31
- Issue:
- 2
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Liquid metals (LMs), renowned for their high conductivity and large deformability, find increasing applications including in flexible electronics and soft robotics. One critical process in these applications is the precise patterning of LMs into desired shapes. Yet, existing LM patterning techniques predominantly focus on 2D patterns due to challenges posed by the inherent fluidity and leakage of LMs. Here, we introduce an approach that bypasses these limitations, enabling the creation of complex 3D leakage‐free LM structures. This is achieved through mechanical programming of 2D magnetically immobilized LM paste formed via incorporating magnetic particles into LMs. Such composite effectively resists leakage due to the combined effect of strong magnetic inter‐attraction within the porous magnetic networks and the high surface tension of LMs, while retaining the high conductivity. Diverse freestanding magnetic LM structures, obtained upon LM solidification at ambient temperature, dynamically morph between their 2D and various 3D configurations through multiple cycles of induction heating and magnetic‐assisted reprogramming, featuring large compression resistance and self‐healing capabilities. Potential applications of these leakage‐resistant, shape‐adaptable structures are demonstrated through a helical magnetic LM antenna, which showcases its efficiency in wireless communication and energy harvesting.more » « less
-
Abstract 4D printing is the 3D printing of objects that change chemically or physically in response to an external stimulus over time. Photothermally responsive shape memory materials are attractive for their ability to undergo remote activation. While photothermal methods using gold nanorods (AuNRs) are used for shape recovery, 3D patterning of these materials into objects with complex geometries using degradable materials is not addressed. Here, the fabrication of 3D printed shape memory bioplastics with photo‐activated shape recovery is reported. Protein‐based nanocomposites based on bovine serum albumin (BSA), poly (ethylene glycol) diacrylate (PEGDA), and AuNRs are developed for vat photopolymerization. These 3D printed bioplastics are mechanically deformed under high loads, and the proteins served as mechano‐active elements that unfolded in an energy‐dissipating mechanism that prevented fracture of the thermoset. The bioplastic object maintained its metastable shape‐programmed state under ambient conditions. Subsequently, up to 99% shape recovery is achieved within 1 min of irradiation with near‐infrared (NIR) light. Mechanical characterization and small angle X‐ray scattering (SAXS) analysis suggest that the proteins mechanically unfold during the shape programming step and may refold during shape recovery. These composites are promising materials for the fabrication of biodegradable shape‐morphing devices for robotics and medicine.more » « less
-
Two-dimensional responsive materials that change shape into complex three-dimensional structures are valuable for creating systems ranging from wearable electronics to soft robotics. Typically, the final 3D structure is unique and predetermined through the materials’ processing. Here, we use theory and simulation to devise a distinctive approach for driving shape changes of 2D elastic sheets in fluid-filled microchambers. The sheets are coated with catalyst to generate controllable fluid flows, which transform the sheets into complex 3D shapes. A given shape can be achieved by patterning the arrangement of the catalytic domains on the sheet and introducing the appropriate reactant to initiate a specific catalytic reaction. Moreover, a single sheet that encompasses multiple catalytic domains can be transformed into a variety of 3D shapes through the addition of one or more reactants. Materials systems that morph on-demand into a variety of distinct structures can simplify manufacturing processes and broaden the utility of soft materials.more » « less
-
Fabricating complex structures on micro‐ and mesoscales is a critical aspect in the design of advanced sensors and soft electronics. However, soft lithographic methods offer an important approach to fabricating such structures, the progress in the field of additive manufacturing (e.g., 3D printing) offers methods of fabrication with much more material complexity. The rheological complexity of the printing material, however, often dictates the limitations of printing. In particular, the challenges involved in synthesizing printing materials that can enable shape retention at smaller scales (<100 μm), yet be conductive, limits many applications of 3D printing to soft microelectronics. Herein, a printing‐centered approach using a novel particle‐free conductive emulsion ink is presented. This approach separates the printing and polymerization of a conductive monomer (pyrrole) and renders a novel ink that is used to print filaments with heretofore impossible to realize 3D feature dimensions and build structures with high shape retention. The printability of the ink is evaluated, and post‐treatment properties assessed. Multidirectional strain sensors are printed using the emulsion ink to illustrate an exemplary application in soft electronics.more » « less
