skip to main content


Title: A microbial desalination process with microalgae biocathode using sodium bicarbonate as an inorganic carbon source
This research investigates a novel platform for an energy-yielding wastewater treatment and desalination scheme in which the organic matter present in wastewater is purposely fed to the exoelectrogenic bacteria to produce bioelectricity in a three-compartment bioelectrochemical system called photosynthetic microbial desalination cell (PMDC). The role of an inorganic carbon source in the microalgae biocathode was studied. Addition of sodium bicarbonate (NaHCO3) increased power production, microalgae growth and desalination rate. A power density of 660 mW/m3 was measured which is about 7.5 times higher than the PMDCs without NaHCO3. Desalination rate was more than 40% after 72 h. Overall, the process could be energy-positive while producing 4.21 kWh per m3 of wastewater treated including desalination energy savings and microalgae biomass energy potential.  more » « less
Award ID(s):
1632019
NSF-PAR ID:
10080562
Author(s) / Creator(s):
Date Published:
Journal Name:
International biodeterioration & biodegradation
Volume:
130
ISSN:
0964-8305
Page Range / eLocation ID:
91-97
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    This study reports an investigation of the concept, application and performance of a novel bioelectrochemical nitritation-anammox microbial desalination cell (MDC) for resource-efficient wastewater treatment and desalination. Two configurations of anammox MDCs (anaerobic-anammox cathode MDC (AnAmoxMDC) and nitration-anammox cathode MDC (NiAmoxMDC)) were compared with an air cathode MDC (CMDC), operated in fed-batch mode. Results from this study showed that the maximum power density produced by NiAmoxMDC (1,007 mW/m3) was higher than that of AnAmoxMDC (444 mW/m3) and CMDC (952 mW/m3). More than 92% of ammonium-nitrogen (NH4+-N) removal was achieved in NiAmoxMDC, significantly higher than AnAmoxMDC (84%) and CMDC (77%). The NiAmoxMDC performed better than CMDC and AnAmoxMDC in terms of power density, COD removal and salt removal in desalination chamber. In addition, cyclic voltammetry analysis of anammox cathode showed a redox peak centered at −140 mV Vs Ag/AgCl confirming the catalytic activity of anammox bacteria towards the electron transfer process. Further, net energy balance of the NiAmoxMDC was the highest (NiAmoxMDC-0.022 kWh/m3>CMDC-0.019 kWh/m3>AnAmoxMDC-0.021 kWh/m3) among the three configurations. This study demonstrated, for the first time, a N-E-W synergy for resource-efficient wastewater treatment using nitritation-anammox process.

     
    more » « less
  2. This study presents the use of an autotrophic microorganism, Anammox bacteria, as a sustainable biocatalyst/biocathode in microbial desalination cells (MDCs) for energy-positive wastewater treatment. We report the first proof of concept study to prove that anammox mechanism can be beneficial in MDCs to provide simultaneous removal of carbon and nitrogen compounds from wastewater while producing bioelectricity. A series of experiments were conducted to enrich and evaluate the anammox mechanism and the process performance in continuous, fed-batch mode conditions. Coulombic efficiency of MDCs and nitrite and ammonium removal of wastewater increased in successive batch studies. A maximum power density of 0.092 Wm−3 (or a maximum current density of 0.814 A m−3) with more than 90% of ammonium removal was achieved in this system. We calculated the Nernst potential for the nitrite reduction in the anammox biocathode chamber and compared with experimental values. Sequential removal of carbon and nitrogen compounds in anode and cathode chambers respectively, was also evaluated. Further, the inhibition effect of high nitrogen concentrations and the variations in microbial community profiles, especially, anammox presence was studied at different carbon and ammonia concentrations. Experimental studies and microbial community analysis are presented in detail. 
    more » « less
  3. Highlights Aquatic vegetation-based nutrient recovery offers an alternate approach for treating agricultural wastewater. Microalgae and duckweed can upcycle waste nutrients into valuable bio-based products. Producing feed, fertilizer, and fuel from manure-grown aquatic vegetation promotes a circular N-bioeconomy. Abstract . The massive amounts of nutrients that are currently released into the environment as waste have the potential to be recovered and transformed from a liability into an asset through photosynthesis, industry insight, and ecologically informed engineering design aimed at circularity. Fast-growing aquatic plant-like vegetation such as microalgae and duckweed have the capacity to enable local communities to simultaneously treat their own polluted water and retain nutrients that underlie the productivity of modern agriculture. Not only are they highly effective at upcycling waste nutrients into protein-rich biomass, microalgae and duckweed also offer excellent opportunities to substitute or complement conventional synthetic fertilizers, feedstocks in biorefineries, and livestock feed while simultaneously reducing the energy consumption and greenhouse gas emissions that would otherwise be required for their production and transport to farms. Integrated systems growing microalgae or duckweed on manure or agricultural runoff, and subsequent reuse of the harvested biomass to produce animal feed, soil amendments, and biofuels, present a sustainable approach to advancing circularity in agricultural systems. This article provides a review of past efforts toward advancing the circular nitrogen bioeconomy using microalgae- and duckweed-based technologies to treat, recover, and upcycle nutrients from agricultural waste. The majority of the work with microalgae- and duckweed-based wastewater treatment has been concentrated on municipal and industrial effluents, with <50% of studies focusing on agricultural wastewater. In terms of scale, more than 91% of the microalgae-based studies and 58% of the duckweed-based studies were conducted at laboratory-scale. While the range of nutrient removals achieved using these technologies depends on various factors such as species, light, and media concentrations, 65% to 100% of total N, 82% to 100% of total P, 98% to 100% of NO3-, and 96% to 100% of NH3/NH4+ can be removed by treating wastewater with microalgae. For duckweed, removals of 75% to 98% total N, 81% to 93% total P, 72% to 98% NH3/NH4+, and 57% to 92% NO3- have been reported. Operating conditions such as hydraulic retention time, pH, temperature, and the presence of toxic nutrient levels and competing species in the media should be given due consideration when designing these systems to yield optimum benefits. In addition to in-depth studies and scientific advancements, policies encouraging supply chain development, market penetration, and consumer acceptance of these technologies are vitally needed to overcome challenges and to yield substantial socio-economic and environmental benefits from microalgae- and duckweed-based agricultural wastewater treatment. Keywords: Circular bioeconomy, Duckweed, Manure treatment, Microalgae, Nitrogen, Nutrient recycling, Wastewater treatment. 
    more » « less
  4. Abstract

    Understanding the thermodynamics associated with ion mixing and separation processes is important in order to meet the rising demands for clean energy and water production. Several electrochemical-based technologies such as capacitive deionization and capacitive mixing (CapMix) are capable of achieving desalination and energy production through ion mixing and separation processes, yet experimental investigations suggest energy conversion occurs with low second law (thermodynamic) efficiency. Here, we explore the maximum attainable efficiency for different CapMix cycles to investigate the impact cycle operation has on energy extraction. All investigated cycles are analogous to well documented heat engine cycles. In order to analyze CapMix cycles, we develop a physics-based model of the electric double layer based on the Gouy-Chapman-Stern theory. Evaluating CapMix cycles for energy generation revealed that cycles where ion mixing occurs at constant concentration and switching occurs at constant charge (a cycle analogous to the Stirling engine) attained the highest overall first law (electrical energy) efficiency (39%). This first law efficiency is nearly 300% greater than the first law efficiency of the Otto, Diesel, Brayton, and Atkinson analog cycles where ion mixing occurs while maintaining a constant number of ions. Additionally, the maximum first law efficiency was 89% with a maximum work output of 0.5 kWh per m3 of solution mixed (V = 1.0V) using this same Stirling cycle. Here the salinity gradient was CH = 600 mM and CL = 1 mM (ΔGmix = 0.56 kWh/m3). The effect of voltage was also examined at CH = 600 mM (seawater) and CL = 20 mM (river water). CapMix cycles operated at lower voltage (V < 1.0V), resulted in the Otto cycle yielding the highest first law efficiency of approximately 25% (compared to under 20% for the Stirling cycle); however, this was at the expense of a reduction (50x) in net electrical energy extracted from the same mixing process (0.01 kWh per m3).

     
    more » « less
  5. Abstract

    Microalgae biofilms have been demonstrated to recover nutrients from wastewater and serve as biomass feedstock for bioproducts. However, there is a need to develop a platform to quantitatively describe microalgae biofilm production, which can provide guidance and insights for improving biomass areal productivity and nutrient uptake efficiency. This paper proposes a unified experimental and theoretical framework to investigate algae biofilm growth on a rotating algae biofilm reactor (RABR). Experimental laboratory setups are used to conduct controlled experiments on testing environmental and operational factors for RABRs. We propose a differential–integral equation‐based mathematical model for microalgae biofilm cultivation guided by laboratory experimental findings. The predictive mathematical model development is coordinated with laboratory experiments of biofilm areal productivity associated with ammonia and inorganic phosphorus uptake by RABRs. The unified experimental and theoretical tool is used to investigate the effects of RABR rotating velocity, duty cycle (DC), and light intensity on algae biofilm growth, areal productivity, nutrient uptake efficiency, and energy efficiency in wastewater treatment. Our framework indicates that maintaining a reasonable light intensity range improves biomass areal productivity and nutrient uptake efficiency. Our framework also indicates that faster RABR rotation benefits biomass areal productivity. However, maximizing the nutrient uptake efficiency requires a reasonably low RABR rotating speed. Energy efficiency is strongly correlated with RABR rotating speed and DC.

     
    more » « less