skip to main content


Title: Crystal structure of poly[bis(ammonium) [bis(μ 4 -benzene-1,3,5-tricarboxylato)dizincate] 1-methylpyrrolidin-2-one disolvate]
The title three-dimensional metal–organic framework (MOF) compound, {(NH 4 ) 2 [Zn 2 (C 9 H 3 O 6 ) 2 ]·2C 5 H 9 NO} n , features an anionic framework constructed from Zn 2+ cations and benzene-1,3,5-tricarboxylate (BTC) organic anions. Charge balance is achieved by outer sphere ammonium cations formed by degradation of di- n -butylamine in the solvothermal synthesis of the compound. Binuclear {Zn 2 (COO) 2 } entities act as the framework's secondary building units. Each Zn II atom has a tetrahedral coordination environment with an O 4 set of donor atoms. The three-dimensional framework adopts a rutile-type topology and channels are filled in an alternating fashion with ordered and disordered 1-methylpyrrolidin-2-one solvent molecules and ammonium cations. The latter are held in the channels via four N—H...O hydrogen bonds, including three with the benzene-1,3,5-tricarboxylate ligands of the anionic framework and one with a 1-methylpyrrolidin-2-one solvent molecule.  more » « less
Award ID(s):
1301346
NSF-PAR ID:
10081744
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Acta Crystallographica Section E Crystallographic Communications
Volume:
72
Issue:
5
ISSN:
2056-9890
Page Range / eLocation ID:
764 to 767
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Reactions of the bicompartmental bis(phenolato) compound 6,6′-methylenebis(2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-chlorophenol)hemihydrate (H 2 L ½H 2 O) with 3d metal( ii ) ions afforded novel fully structurally characterized bridged acetato dinuclear complexes [Mn 2 (HL)(μ 1,2 -OAc) 2 ]PF 6 (1) [Zn 2 (HL)(μ 1,2 -OAc)(H 2 O) 0.75 (MeOH) 0.25 ](PF 6 ) 2 ·0.45(H 2 O) (5) and [Cd 2 (HL)(μ 1,1,2 -OAc)(OAc)(H 2 O)]PF 6 ·H 2 O (6) as well as the polymeric bridged-azido tetranuclear catena -[Cu 4 (HL) 2 (μ 1,1 -N 3 ) 2 (μ 1,3 -N 3 ) 2 ](NO 3 ) 2 ·5H 2 O (4). The complex [Cu 4 (HL) 2 (ClO 4 ) 3 (H 2 O) 5 ](ClO 4 ) 3 ·5H 2 O (2) was partially characterized. In addition, three more dinuclear complexes [Cu 2 (H 2 L)(NO 3 ) 2 (H 2 O) 2 ](NO 3 ) 2 (3), [Cu 2 (HL)(OAc)(CH 3 OH)](PF 6 ) 2 (7) and [Cu 2 (HL)(NCS) 2 ]NO 3 ·2H 2 O (8) were also isolated. All complexes were characterized by CHN elemental analysis, IR and UV-Vis spectroscopy, ESI-MS, conductivity measurements and X-ray single crystal crystallography for compounds 1, 4, 5 and 6, where the bis(phenolato) ligand displayed different deprotonation (H 2 L, HL − and L 2− ). The magnetic susceptibility measurements over the temperature range 2–300 K revealed very weak antiferromagnetic coupling in dimanganese( ii ) 1 ( J = −1.64(1) cm −1 ) and almost negligible magnetic interaction in dicopper( ii ) 2 ( J = 0(3) cm −1 ). In the azido catena -[Cu 4 (HL) 2 (μ 1,1 -N 3 ) 2 (μ 1,3 -N 3 ) 2 ](NO 3 ) 2 ·5H 2 O (4) complex, the J value of −133(3) cm −1 was obtained upon moderate-to-strong antiferromagnetic coupling through the di-μ 1,3 -N 3 -bridged dicopper( ii ) unit with no magnetic interaction between the two copper( ii ) ions in the di-μ 1,1 -N 3 -bridged unit. 
    more » « less
  2. null (Ed.)
    The title compound, [Cu 2 (C 19 H 23 N 7 O)(C 2 H 3 O 2 ) 4 ] n , was obtained via reaction of copper(II) acetate with the coordinating ligand, 6-ethoxy- N 2 , N 4 -bis[2-(pyridin-2-yl)ethyl]-1,3,5-triazine-2,4-diamine. The crystallized product adopts the monoclinic P 2 1 / c space group. The metal core exhibits a paddle-wheel structure typical for dicopper tetraacetate units, with triazine and pyridyl nitrogen atoms from different ligands coordinating to the two axial positions of the paddle wheel in an asymmetric manner. This forms a coordination polymer with the segments of the polymer created by the c -glide of the P 2 1 / c setting of the space group. The resulting chains running along the c -axis direction are held together by intramolecular N—H...O hydrogen bonding. These chains are further packed by dispersion forces, producing an extended three-dimensional structure. 
    more » « less
  3. null (Ed.)
    Copper(I) iodide complexes are well known for displaying a diverse array of structural features even when only small changes in ligand design are made. This structural diversity is well displayed by five copper(I) iodide compounds reported here with closely related piperidine-2,6-dithione (SNS), isoindoline-1,3-dithione (SNS6), and 6-thioxopiperidin-2-one (SNO) ligands: di-μ-iodido-bis[(acetonitrile-κ N )(6-sulfanylidenepiperidin-2-one-κ S )copper(I)], [Cu 2 I 2 (CH 3 CN) 2 (C 5 H 7 NOS) 2 ] ( I ), bis(acetonitrile-κ N )tetra-μ 3 -iodido-bis(6-sulfanylidenepiperidin-2-one-κ S )- tetrahedro -tetracopper(I), [Cu 4 I 4 (CH 3 CN) 4 (C 5 H 7 NOS) 4 ] ( II ), catena -poly[[(μ-6-sulfanylidenepiperidin-2-one-κ 2 O : S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NOS)] n ( III ), poly[[(piperidine-2,6-dithione-κ S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NS 2 )] n ( IV ), and poly[[(μ-isoindoline-1,3-dithione-κ 2 S : S )copper(I)]-μ 3 -iodido], [CuI(C 8 H 5 NS 2 )] n ( V ). Compounds I and II crystallize as discrete dimeric and tetrameric complexes, whereas III , IV , and V crystallize as polymeric two-dimensional sheets. To the best of our knowledge, compound III is the first instance of an extended hexagonal [Cu 3 I 3 ] structure that is not supported by bridging ligands. Structures I , II , and IV display weak to moderately strong Cu...Cu cuprophilic interactions [Cu...Cu internuclear distances range between 2.5803 (10) and 2.8485 (14) Å]. All structures except III display weak hydrogen-bonding interactions between the N—H of the ligand and the μ 2 and μ 3 -I − atoms. Structure III contains classical N–H...O interactions between the SNO ligands that connect the molecules in a three-dimensional framework. Complex V features π–π stacking interactions between the aryl rings of the SNS6 ligands within the same polymeric sheet. In structure IV , there were three partially occupied solvent molecules of dichloromethane and one partially occupied molecule of acetonitrile present in the asymmetric unit. The SQUEEZE routine [Spek (2015). Acta Cryst . C 71 , 9–18] was used to correct the diffraction data for diffuse scattering effects and to identify the solvent molecules. The given chemical formula and other crystal data do not take into account the solvent molecules. 
    more » « less
  4. Structural characterization of the ionic title complex, [MgBr(THF) 5 ][Co(dpbz) 2 ]·2THF [THF is tetrahydrofuran, C 4 H 8 O; dpbz is 1,2-bis(diphenylphosphanyl)benzene, C 30 H 24 P 2 ], revealed a well-separated cation and anion co-crystallized with two THF solvent molecules that interact with the cation via weak C—H...O contacts. The geometry about the cobalt center is pseudotetrahedral, as is expected for a d 10 metal center, only deviating from an ideal tetrahedral geometry because of the restrictive bite angles of the bidentate phosphane ligands. Three THF ligands of the cation and one co-crystallized THF solvent molecule are each disordered over two orientations. In the extended structure, the cations and THF solvent molecules are arranged in (100) sheets that alternate with layers of anions, the latter of which show various π-interactions, which may explain the particular packing arrangement. 
    more » « less
  5. Abstract

    The trichromium cluster (tbsL)Cr3(thf) ([tbsL]6−=[1,3,5‐C6H9(NC6H4o‐NSitBuMe2)3]6−) exhibits steric‐ and solvation‐controlled reactivity with organic azides to form three distinct products: reaction of (tbsL)Cr3(thf) with benzyl azide forms a symmetrized bridging imido complex (tbsL)Cr3(μ3‐NBn); reaction with mesityl azide in benzene affords a terminally bound imido complex (tbsL)Cr3(μ1‐NMes); whereas the reaction with mesityl azide in THF leads to terminal N‐atom excision from the azide to yield the nitride complex (tbsL)Cr3(μ3‐N). The reactivity of this complex demonstrates the ability of the cluster‐templating ligand to produce a well‐defined polynuclear transition metal cluster that can access distinct single‐site and cooperative reactivity controlled by either substrate steric demands or reaction media.

     
    more » « less