skip to main content


Title: On the role of return to isotropy in wall-bounded turbulent flows with buoyancy
High Reynolds number wall-bounded turbulent flows subject to buoyancy forces are fraught with complex dynamics originating from the interplay between shear generation of turbulence ( $S$ ) and its production or destruction by density gradients ( $B$ ). For horizontal walls, $S$ augments the energy budget of the streamwise fluctuations, while $B$ influences the energy contained in the vertical fluctuations. Yet, return to isotropy remains a tendency of such flows where pressure–strain interaction redistributes turbulent energy among all three velocity components and thus limits, but cannot fully eliminate, the anisotropy of the velocity fluctuations. A reduced model of this energy redistribution in the inertial (logarithmic) sublayer, with no tuneable constants, is introduced and tested against large eddy and direct numerical simulations under both stable ( $B<0$ ) and unstable ( $B>0$ ) conditions. The model links key transitions in turbulence statistics with flux Richardson number (at $Ri_{f}=-B/S\approx$ $-2$ , $-1$ and $-0.5$ ) to shifts in the direction of energy redistribution. Furthermore, when coupled to a linear Rotta-type closure, an extended version of the model can predict individual variance components, as well as the degree of turbulence anisotropy. The extended model indicates a regime transition under stable conditions when $Ri_{f}$ approaches $Ri_{f,max}\approx +0.21$ . Buoyant destruction $B$ increases with increasing stabilizing density gradients when $Ri_{f} more » « less
Award ID(s):
1644382 1754893
NSF-PAR ID:
10086039
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Journal of Fluid Mechanics
Volume:
856
ISSN:
0022-1120
Page Range / eLocation ID:
61 to 78
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Anisotropic turbulence is ubiquitous in atmospheric and oceanic boundary layers due to differences in energy injection mechanisms. Unlike mechanical production that injects energy in the streamwise velocity component, buoyancy affects only the vertical velocity component. This anisotropy in energy sources, quantified by the flux Richardson numberRif, is compensated by a “return to isotropy” (RTI) tendency of turbulent flows. Describing RTI in Reynolds‐averaged models and across scales continues to be a challenge in stratified turbulent flows. Using phenomenological models for spectral energy transfers, the necessary conditions for which the widely‐used Rotta model captures RTI across variousRifand eddy sizes are discussed for the first time. This work unravels adjustments to the Rotta constant, withRifand scale, necessary to obtain consistency between RTI models and the measured properties of the atmospheric surface layer for planar‐homogeneous and stationary flows in the absence of subsidence. A range ofRifand eddy sizes where the usage of a conventional Rotta model is prohibited is also found. Those adjustments lay the groundwork for new closure schemes.

     
    more » « less
  2. Flow separation caused by steep topography remains a significant obstacle in accurately predicting turbulent boundary-layer flows over complex terrain, despite the utilization of sophisticated numerical models. The addition of atmospheric thermal stability, in conjunction with steep topography, further complicates the determination of disrupted turbulent wind patterns. The turbulent separated flows over a two-dimensional (2D) steep hill under thermal stratification has not been extensively addressed in previous experimental studies. Such measurements are crucial for enhancing our comprehension of flow physics and validating numerical models. We measured the turbulent wind flows over a 2D steep hill immersed in a stable boundary layer (of the bulk Richardson Number = 0.256) in a thermally-stratified boundary-layer wind tunnel. The flow separation, re-circulation zone and flow reattachment were characterized by the planar particle image velocimetry technique. Vertical profiles of mean air temperature and its fluctuations are also quantified at representative locations above the 2D steep hill and in the near wake region. Results indicate that the separated shear layer, initiated near the crest of the 2D steep hill, dominates the physical process leading to high turbulence levels and the turbulent kinetic energy production in the wake region for both stable and neutral thermal stability. Although the stable boundary layer does not dramatically change the turbulent flow pattern around the hill, the mean separation bubble is elongated by 13%, and its vertical extent is decreased by approximately 20%. Furthermore, the reduced turbulence intensities and turbulent kinetic energy of the near wake flow are attributed to the relatively low turbulence intensity and low momentum of the stable boundary layer due to buoyancy damping, compared to the neutral boundary layer. Additionally, a distinct low-temperature region—a cold pool—is extended beyond the separation bubble, reflecting the significant sheltering effect of the 2D steep hill on the downwind flow and temperature field. 
    more » « less
  3. null (Ed.)
    Turbulence parameters in the lower troposphere (up to ~4.5 km) are estimated from measurements of high-resolution and fast-response cold-wire temperature and Pitot tube velocity from sensors onboard DataHawk Unmanned Aerial Vehicles (UAVs) operated at the Shigaraki Middle and Upper atmosphere (MU) Observatory during two ShUREX (Shigaraki UAV Radar Experiment) campaigns in 2016 and 2017. The practical processing methods used for estimating turbulence kinetic energy dissipation rate ε and temperature structure function parameter C T 2 from one-dimensional wind and temperature frequency spectra are first described in detail. Both are based on the identification of inertial (−5/3) subranges in respective spectra. Using a formulation relating ε and C T 2 valid for Kolmogorov turbulence in steady state, the flux Richardson number R f and the mixing efficiency χ m are then estimated. The statistical analysis confirms the variability of R f and χ m around ~ 0.13 − 0.14 and ~ 0.16 − 0.17 , respectively, values close to the canonical values found from some earlier experimental and theoretical studies of both the atmosphere and the oceans. The relevance of the interpretation of the inertial subranges in terms of Kolmogorov turbulence is confirmed by assessing the consistency of additional parameters, the Ozmidov length scale L O , the buoyancy Reynolds number R e b , and the gradient Richardson number Ri. Finally, a case study is presented showing altitude differences between the peaks of N 2 , C T 2 and ε , suggesting turbulent stirring at the margin of a stable temperature gradient sheet. The possible contribution of this sheet and layer structure on clear air radar backscattering mechanisms is examined. 
    more » « less
  4. Turbulence and mixing in a near-bottom convectively driven flow are examined by numerical simulations of a model problem: a statically unstable disturbance at a slope with inclination $\unicode[STIX]{x1D6FD}$ in a stable background with buoyancy frequency $N$ . The influence of slope angle and initial disturbance amplitude are quantified in a parametric study. The flow evolution involves energy exchange between four energy reservoirs, namely the mean and turbulent components of kinetic energy (KE) and available potential energy (APE). In contrast to the zero-slope case where the mean flow is negligible, the presence of a slope leads to a current that oscillates with $\unicode[STIX]{x1D714}=N\sin \unicode[STIX]{x1D6FD}$ and qualitatively changes the subsequent evolution of the initial density disturbance. The frequency, $N\sin \unicode[STIX]{x1D6FD}$ , and the initial speed of the current are predicted using linear theory. The energy transfer in the sloping cases is dominated by an oscillatory exchange between mean APE and mean KE with a transfer to turbulence at specific phases. In all simulated cases, the positive buoyancy flux during episodes of convective instability at the zero-velocity phase is the dominant contributor to turbulent kinetic energy (TKE) although the shear production becomes increasingly important with increasing  $\unicode[STIX]{x1D6FD}$ . Energy that initially resides wholly in mean available potential energy is lost through conversion to turbulence and the subsequent dissipation of TKE and turbulent available potential energy. A key result is that, in contrast to the explosive loss of energy during the initial convective instability in the non-sloping case, the sloping cases exhibit a more gradual energy loss that is sustained over a long time interval. The slope-parallel oscillation introduces a new flow time scale $T=2\unicode[STIX]{x03C0}/(N\sin \unicode[STIX]{x1D6FD})$ and, consequently, the fraction of initial APE that is converted to turbulence during convective instability progressively decreases with increasing $\unicode[STIX]{x1D6FD}$ . For moderate slopes with $\unicode[STIX]{x1D6FD}<10^{\circ }$ , most of the net energy loss takes place during an initial, short ( $Nt\approx 20$ ) interval with periodic convective overturns. For steeper slopes, most of the energy loss takes place during a later, long ( $Nt>100$ ) interval when both shear and convective instability occur, and the energy loss rate is approximately constant. The mixing efficiency during the initial period dominated by convectively driven turbulence is found to be substantially higher (exceeds 0.5) than the widely used value of 0.2. The mixing efficiency at long time in the present problem of a convective overturn at a boundary varies between 0.24 and 0.3. 
    more » « less
  5. Abstract

    This study evaluates the methods of identifying the heightziof the top of the convective boundary layer (CBL) during winter (December and January) over the Great Lakes and nearby land areas using observations taken by the University of Wyoming King Air research aircraft during the Lake-Induced Convection Experiment (1997/98) and Ontario Winter Lake-effect Systems (2013/14) field campaigns. Since CBLs facilitate vertical mixing near the surface, the most direct measurement ofziis that above which the vertical velocity turbulent fluctuations are weak or absent. Thus, we usezifrom the turbulence method as the “reference value” to whichzifrom other methods, based on bulk Richardson number (Rib), liquid water content, and vertical gradients of potential temperature, relative humidity, and water vapor mixing ratio, are compared. The potential temperature gradient method using a threshold value of 0.015 K m−1for soundings over land and 0.011 K m−1for soundings over lake provided the estimates ofzithat are most consistent with the turbulence method. The Ribthreshold-based method, commonly used in numerical simulation studies, underestimatedzi. Analyzing the methods’ performance on the averaging windowzavgwe recommend usingzavg= 20 or 50 m forziestimations for lake-effect boundary layers. The present dataset consists of both cloudy and cloud-free boundary layers, some having decoupled boundary layers above the inversion top. Because cases of decoupled boundary layers appear to be formed by nearby synoptic storms, we recommend use of the more general term, elevated mixed layers.

    Significance Statement

    The depthziof the convective atmospheric boundary layer (CBL) strongly influences precipitation rates during lake-effect snowstorms (LES). However, variousziapproximation methods produce significantly different results. This study utilizes extensive concurrently collected observations by project aircraft during two LES field studies [Lake-Induced Convection Experiment (Lake-ICE) and OWLeS] to assess howzifrom common estimation methods compare with “reference”ziderived from turbulent fluctuations, a direct measure of CBL mixing. For soundings taken both over land and lake; with cloudy or cloud-free conditions, potential temperature gradient (PTG) methods provided the best agreement with the referencezi. A method commonly employed in numerical simulations performed relatively poorly. Interestingly, the PTG method worked equally well for “coupled” and elevated decoupled CBLs, commonly associated with nearby cyclones.

     
    more » « less