Direct non‐oxidative methane conversion (DNMC) has been recognized as a single‐step technology that directly converts methane into olefins and higher hydrocarbons. High reaction temperature and low catalyst durability, resulting from the endothermic reaction and coke deposition, are two main challenges. We show that a millisecond catalytic wall reactor enables stable methane conversion, C2+selectivity, coke yield, and long‐term durability. These effects originate from initiation of the DNMC on a reactor wall and maintenance of the reaction by gas‐phase chemistry within the reactor compartment. The results obtained under various temperatures and gas flow rates form a basis for optimizing the process towards lighter C2or heavier aromatic products. A process simulation was done by Aspen Plus to understand the practical implications of this reactor in DNMC. High carbon and thermal efficiencies and low cost of the reactor materials are realized, indicating the technoeconomic viability of this DNMC technology.
Direct non‐oxidative methane conversion (DNMC) has been recognized as a single‐step technology that directly converts methane into olefins and higher hydrocarbons. High reaction temperature and low catalyst durability, resulting from the endothermic reaction and coke deposition, are two main challenges. We show that a millisecond catalytic wall reactor enables stable methane conversion, C2+selectivity, coke yield, and long‐term durability. These effects originate from initiation of the DNMC on a reactor wall and maintenance of the reaction by gas‐phase chemistry within the reactor compartment. The results obtained under various temperatures and gas flow rates form a basis for optimizing the process towards lighter C2or heavier aromatic products. A process simulation was done by Aspen Plus to understand the practical implications of this reactor in DNMC. High carbon and thermal efficiencies and low cost of the reactor materials are realized, indicating the technoeconomic viability of this DNMC technology.
more » « less- Award ID(s):
- 1642405
- PAR ID:
- 10091518
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 131
- Issue:
- 21
- ISSN:
- 0044-8249
- Page Range / eLocation ID:
- p. 7157-7160
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Direct conversion of methane into ethylene through the oxidative coupling of methane (OCM) is a technically important reaction. However, conventional co-fed fixed-bed OCM reactors still face serious challenges in conversion and selectivity. In this paper, we apply a finite element model to simulate OCM reaction in a plug-flow CO2/O2transport membrane (CTM) reactor with a directly captured CO2and O2mixture as a soft oxidizer. The CTM is made of three phases: molten carbonate, 20% Sm-doped CeO2, and LiNiO2. The membrane parameters are first validated by CO2/O2flux data obtained from CTM experiments. The OCM reaction is then simulated along the length of tubular plug-flow reactors filled with a La2O3-CaO-modified CeO2catalyst bed, while a mixture of CO2/O2is gradually added through the wall of the tubular membrane. A 12-step OCM kinetic mechanism is considered in the model for the catalyst bed and validated by data obtained from a co-fed fixed-bed reactor. The modeled results indicate a much-improved OCM performance by membrane reactor in terms of C2-yield and CH4conversion rate over the state-of-the-art, co-fed, fixed-bed reactor. The model further reveals that improved performance is fundamentally rooted in the gradual methane conversion with CO2/O2offered by the plug-flow membrane reactor.
-
more » « less
Abstract Direct nonoxidative methane conversion (DNMC) transforms CH4to higher (C2+) hydrocarbons and H2in a single step, but its utility is challenged by low CH4 equilibrium conversion, carbon deposition (coking), and its endothermic reaction energy requirement. This work reports a heat‐exchanged autothermal H2‐permeable tubular membrane reactor composed of a thin mixed ionic‐electronic conducting SrCe0.7Zr0.2Eu0.1O3–
δ membrane supported on a porous SrCe0.8Zr0.2O3–δ tube in which a Fe/SiO2 DNMC catalyst is packed, that concurrently tackles all of these challenges. The H2‐permeation flux drives CH4 conversion. O2from an air simulant (O2/He mixture) sweep outside the membrane reacts with permeated H2 to provide heat for the endothermic DNMC reaction. The energy balance between the endothermic DNMC and exothermic H2 combustion on opposite sides of the membrane is achieved, demonstrating the feasibility for autothermal operation using a simple air sweep gas. Moreover, the back diffusion of O2 from the sweep side to the catalyst side oxidizes any deposited carbon into CO. Thus, for the first time demonstrating all the desired attributes, a heat‐exchanged H2‐permeable membrane reactor capable of achieving single‐step auto‐thermal DNMC catalysis while simultaneously improving CH4conversion and preventing coking is achieved. -
more » « less
Abstract Balancing kinetics, a crucial priority in catalysis, is frequently achieved by sacrificing activity of elementary steps to suppress side reactions and enhance catalyst stability. Dry reforming of methane (DRM), a process operated at high temperature, usually involves fast C-H activation but sluggish carbon removal, resulting in coke deposition and catalyst deactivation. Studies focused solely on catalyst innovation are insufficient in addressing coke formation efficiently. Herein, we develop coke-free catalysts that balance kinetics of elementary steps for overall thermodynamics optimization. Beginning from a highly active cobalt aluminum oxide (CoAl2O4) catalyst that is susceptible to severe coke formation, we substitute aluminum (Al) with gallium (Ga), reporting a CoAl0.5Ga1.5O4-R catalyst that performs DRM stably over 1000 hours without observable coke deposition. We find that Ga enhances DRM stability by suppressing C-H activation to balance carbon removal. A series of coke-free DRM catalysts are developed herein by partially substituting Al from CoAl2O4with other metals.
-
more » « less
Abstract The effective deoxygenation of oxygenates remains a major challenge that needs to be overcome for industrial‐scale conversion of biomass to fuels. Present technology uses expensive gaseous hydrogen for deoxygenation. This work looks at the possibility of using methane or natural gas as an alternative for the deoxygenation process. Catalytic pyrolysis studies were carried out using furan as the model oxygenate in the presence of methane in a fixed‐bed reactor over 5 % Ni/HZSM‐5 as catalyst. The effects of temperature and space velocity on the catalyst activity, reaction kinetics, and deactivation behavior were studied. It was found that the deoxygenation of furan was first and second order with respect to furan and methane concentration, respectively. Deactivation studies suggested that catalyst deactivation takes place through poisoning, fouling, and sintering.
