skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Heat Built Up During Dynamic Mechanical Analysis (DMA) Testing of Rubber Specimens
The viscoelastic properties of rubbers play an important role in dynamic applications and are commonly measured and quantified by means of Dynamic Mechanical Analysis (DMA) tests. The rubber properties including the static and dynamic moduli are a function of temperature; and an increase in the temperature leads to a decrease in both moduli of the rubber. Due to the heat generation inside the rubber during the DMA test and the possible change of the rubber properties it is important to quantify the amount of temperature rise in the rubber specimen during the test. In this study, a Finite Element Analysis (FEA) model is used to predict the heat generation and temperature rise during the rubber DMA tests. This model is used to identify the best shape of the specimen to achieve the minimum increase in temperature during the test. The double sandwich shear test and the cyclic compression tests are considered in this study because these two tests are mostly used in industry to predict the rubber viscoelastic properties.  more » « less
Award ID(s):
1650423
PAR ID:
10092783
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Heat Built Up During Dynamic Mechanical Analysis (DMA) Testing of Rubber Specimens
Page Range / eLocation ID:
V009T12A059
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Modelling and Simulation in Engineering)
    The aim of this study is to design a new dynamic mechanical analysis (DMA) measurement system that can operate for shear tests at frequencies as high as 10 kHz with strain amplitudes sufficient for viscoelastic materials operating in high-frequency deformation applications, such as tire rubbers. The available DMA systems in market cannot effectively operate for accurate and direct measurement of viscoelastic material properties for applications dealing with high-frequency deformation of materials. Due to this, the available DMA systems are used for indirect measurements at low frequencies and low temperatures, followed by using time-temperature superposition principle to predict the properties at high frequencies. The goal of this study is to make the range of the test broad enough to eliminate the use of the time-temperature superposition principle in the determination of properties of viscoelastic materials. Direct measurement of viscoelastic material properties and increasing the accuracy of results are the main motivations to design a new DMA system. For this purpose, the state-of-the-art technologies to achieve high frequencies and strain amplitudes as well as instrumentation and control of the system are studied. The design process is presented in this paper. 
    more » « less
  2. ; ; ; (, Journal of Polymer Science Part B: Polymer Physics)
    ABSTRACT The utility of the quartz crystal microbalance (QCM) as a high‐frequency rheometer operating at 15 MHz was demonstrated. High‐frequency data obtained from a series of rubbery materials were compared with results obtained from traditional dynamic mechanical analysis (DMA) at much lower frequencies. The high‐frequency data enable meaningful shift factors to be obtained at temperatures much further above glass‐transition temperature (Tg) than would otherwise be possible, giving a more complete picture of the temperature dependence of the viscoelastic properties. The QCM can also be used to quantify mass uptake and changes in viscoelastic properties during sample oxidation. The viscoelastic response spanning the full range of behaviors from the rubber to glassy regimes was found to fit well with a six‐element model consisting of three power‐law springpot elements. One of these elements is particularly sensitive to the behavior in the transition regime where the phase angle is maximized. The value of this quantity is obtained from the maximum phase angle, which can be obtained from a temperature sweep at fixed frequency, proving a means for more detailed frequency‐dependent rheometric information to be obtained from a fixed‐frequency measurement at a range of temperatures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2019,57, 1246–1254 
    more » « less
  3. ; ; ; (, Polymers)
    Polyurethane and polyurea-based adhesives are widely used in various applications, from automotive to electronics and medical applications. The adhesive performance depends strongly on its composition, and developing the formulation–structure–property relationship is crucial to making better products. Here, we investigate the dependence of the linear viscoelastic properties of polyurea nanocomposites, with an IPDI-based polyurea (PUa) matrix and exfoliated graphene nanoplatelet (xGnP) fillers, on the hard-segment weight fraction (HSWF) and the xGnP loading. We characterize the material using scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). It is found that changing the HSWF leads to a significant variation in the stiffness of the material, from about 10 MPa for 20% HSWF to about 100 MPa for 30% HSWF and about 250 MPa for the 40% HSWF polymer (as measured by the tensile storage modulus at room temperature). The effect of the xGNP loading was significantly more limited and was generally within experimental error, except for the 20% HSWF material, where the xGNP addition led to about an 80% increase in stiffness. To correctly interpret the DMA results, we developed a new physics-based rheological model for the description of the storage and loss moduli. The model is based on the fractional calculus approach and successfully describes the material rheology in a broad range of temperatures (−70 °C–+70 °C) and frequencies (0.1–100 s−1), using only six physically meaningful fitting parameters for each material. The results provide guidance for the development of nanocomposite PUa-based materials. 
    more » « less
  4. ; ; (, Journal of Electronic Packaging)
    Abstract Structural components such as printed circuit boards (PCBs) are critical in the thermomechanical reliability assessment of electronic packages. Previous studies have shown that geometric parameters such as thickness and mechanical properties like elastic modulus of PCBs have direct influence on the reliability of electronic packages. Elastic material properties of PCBs are commonly characterized using equipment such as tensile testers and used in computational studies. However, in certain applications viscoelastic material properties are important. Viscoelastic influence on materials is evident when one exceeds the glass transition temperature of materials. Operating conditions or manufacturing conditions such as lamination and soldering may expose components to temperatures that exceed the glass transition temperatures. Knowing the viscoelastic behavior of the different components of electronic packages is important in order to perform accurate reliability assessment and design components such as printed circuit boards (PCBs) that will remain dimensionally stable after the manufacturing process. Previous researchers have used creep and stress relaxation test data to obtain the Prony series terms that represent the viscoelastic behavior and perform analysis. Others have used dynamic mechanical analysis in order to obtain frequency domain master curves that were converted to time domain before obtaining the Prony series terms. In this paper, nonlinear solvers were used on frequency domain master curve results from dynamic mechanical analysis to obtain Prony series terms and perform finite element analysis on the impact of adding viscoelastic properties when performing reliability assessment. The computational study results were used to perform comparative assessment to understand the impact of including viscoelastic behavior in reliability analysis under thermal cycling and drop testing for Wafer Level Chip Scale Packages. 
    more » « less
  5. (, ASC Thirty-Sixth Technical Conference Proceedings)
    Ozden Ochoa (Ed.)
    This paper investigates the mechanical properties of potential sheet stocks of a Laminated Object Manufacturing (LOM) 3D printer made using woven jute fabrics infused with two types of bioresin. The combinations of bioresins and the reinforcements would make green sheet stocks that are expected to be environmentally friendly comparing to traditional synthetic fibers infused with regular resins. Pure resin samples are also involved for comparison purposes. Both tensile and flexural properties are measured following ASTM D638 and D3039 standards (for tensile tests) as well as ASTM D790 and D7264 standards (for flexural tests). Detailed processes of specimen preparation followed by test procedures are introduced. Tensile strengths and moduli as well as flexural strengths and moduli are obtained for comparison. Based on the study of the mechanical properties of both types of pure resin and woven jute fiber-reinforced composites, the research team concluded a few important findings that could be used as guidelines in the sheet stock selection and preparation for the LOM 3D printer that is currently under the building process. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email