skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Fundamental Studies of the Mechanisms of Pressure Shielding
Previous studies have demonstrated that structures such as a canopy or finlets placed within a boundary layer over an aerodynamic surface can attenuate pressure fluctuations on the surface without compromising aerodynamic performance. This paper describes research into the fundamental mechanisms of this pressure shielding. Experiments and analysis are performed on elemental canopy configurations (parallel arrays of streamwise rods) that eliminate the confounding effects of a leading-edge support structure. Experiments show that such a canopy produces attenuation in two distinct frequency ranges. At low frequencies (convective scales much greater than the canopy height) attenuation spectra scale on the canopy height Strouhal number, but at high frequencies (canopy scales of the order of the height) a dissipation type frequency scaling appears more appropriate. RANS calculations are performed simulating the canopy geometry directly and as a porous layer. Pressure fluctuation spectra predicted from the RANS results by separately accounting for inner and outer layer contributions are able to accurately recreate the wall pressure spectra both with and without the canopy and thus the major features of the attenuation spectra.  more » « less
Award ID(s):
1802915
PAR ID:
10093442
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
AIAA/CEAS 25th Aeroacoustics Conference
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, AIAA SciTech 2021)
    null (Ed.)
    Previous studies have demonstrated that structures such as a canopy or finlets placed within a boundary layer over an aerodynamic surface can attenuate pressure fluctuations on the surface without compromising aerodynamic performance. This paper describes research into the fundamental mechanisms of this pressure shielding. Experiments and analysis are performed on elemental canopy configurations which are arrays of streamwise rods placed parallel to the wall in order to eliminate the confounding effects of a leading edge support structure. Experiments show that such a canopy produces attenuation in three distinct frequency ranges. At low frequencies, where convective scales are much greater than the canopy height, attenuation spectra scale on the canopy height Strouhal number, but at high frequencies, a dissipation type frequency scaling appears more appropriate. There is mid-freqeuncy region which shows reduction in attenuation and is observed for all canopy structures tested. Attenuation in this region appears to scale with Strouhal number based on canopy spacing. 
    more » « less
  2. (, AIAA Aviation 2021)
    null (Ed.)
    An analytical approach has been developed to model the rapid term contribution to the unsteady surface pressure fluctuations in wall jet turbulent boundary layer flows. The formulation is based on solving Poisson’s equation for the turbulent wall pressure by integrating the source terms (Kraichnan, 1956). The inputs for the model are obtained from 2D time-resolved Particle Image Velocimetry measurements performed in a wall jet flow. The wall normal turbulence wavenumber two-point cross-spectra is determined using an extension of the von Kármán homogeneous turbulence spectrum. The model is applied to compare and understand the baseline flow in the wall jet and to study the attenuation in surface pressure fluctuations by unidirectional canopies (Gonzales et al, 2019). Different lengthscale formulations are tested and we observe that the wall jet flow boundary layer contributes to the surface pressure fluctuations from two distinct regions. The high frequency spectrum is captured well. However, the low frequency range of the spectrum is not entirely captured. This is because we have used PIV data only up to a height of 2.3𝜹, whereas the largest turbulent lengthscales in the wall jet are on the order of 𝒚𝟏/𝟐≈𝟔𝜹. Using the flow data obtained from PIV and Pitot probe measurements, the model predicts a reduction in the surface pressure due to canopy at low frequencies. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, AIAA Science and Technology Forum and Exposition 2019)
    A new Anechoic Wall Jet Wind Tunnel was built at Virginia Tech. A detailed design based on the old wall jet tunnel was done to improve the quality of the resultant flow. Aerodynamic and acoustic calibrations were performed in order to understand properties and characteristics of the flow generated by this new facility which can be used for various aeroacoustic studies. Far-field acoustics were measured using half-inch B&K microphones in a streamwise array to characterize and reduce the background noise. Sound pressure levels were lower by 10 dB for frequencies up to 700Hz in comparison to the old facility. The turbulent surface pressure fluctuations of the wall-jet flow were studied using Sennheiser microphones placed along streamwise and spanwise locations to record surface pressure fluctuations. Comparison of the autocorrelation plotted for microphones along the same span indicate uniform flow features. A decay in the turbulence levels is observed along the downstream direction as expected. Aerodynamic calibrations included mean velocity measurements along different spanwise locations, wall-jet boundary layer profiles and streamwise cross-sections. Spanwise and cross-sectional velocity profiles show good uniformity of the flow. Detailed boundary layer analyses were performed with the parameters obtained from the experiments. 
    more » « less
  4. (, Lehigh University)
    An experimental study investigates parametrically the effects of porosity on the acoustic and aerodynamic fields about lifting- and non-lifting surfaces at two separate aeroacoustic facilities using microphone arrays and hot-wire anemometry. A single dimensionless porosity parameter characterizes the flow noise generated by a turbulent boundary layer and informs the design of the porous edge test specimens, including perforated flat plates and flat-plate extensions with a blunt or sharp trailing edge. The strong tonal peak due to vortex shedding from blunt trailing-edges diminishes in magnitude as the porosity parameter increases, and high-porosity plates eliminate this tone from the acoustic spectra. Single-microphone measurements indicate further that the porous plates examined can reduce low-frequency noise and increase high-frequency excess noise levels by up to 10 dB. DAMAS beamforming of the porous plates with sharpened edges reveal similar results on the acoustic spectra and identify that the principal effect of edge porosity on the acoustic source regions is a reduction in low-frequency noise and an increase in high-frequency noise across the entire plate. Noise generated by porous edges in the low-frequency range by the trailing- and leading-edge regions can be reduced by up to 20 dB, and porous edges increase high-frequency noise by up to 20 dB. Plates with the same dimensionless porosity perform similarly, where plates with circular holes perform slightly better (2 dB) than their counterparts with square holes at reducing low-frequency noise the most and increasing high-frequency noise the least in wind tunnel testing. Hot-wire anemometry of the flow field about blunt porous trailing edges reveals a downward shift of the bluntness-induced vortex-shedding peak in the spectra of turbulent velocity fluctuations, which are not seen in the acoustic spectra. In addition, flow field measurements for both the blunt-edged and sharp-edge plates indicate significant increases in turbulence intensity at the plate surface which are believed to be caused by the presence of holes and related to the increase in noise seen at high frequencies. The wing of a remote-controlled glider is modified with porous plates near the trailing edge to demonstrate reductions in surface pressure level fluctuations on a flying vehicle at the owl scale. Measurements of these fluctuations on the wing and fuselage indicate the capacity of porous plates to modestly reduce surface pressure levels in select frequency ranges and settings of aerial vehicles. 
    more » « less
  5. ; ; ; ; ; (, AIAA Scitech 2019 Forum)
    Direct numerical simulations (DNS) of the full-scale axisymmetric nozzle of a Mach 8 wind tunnel are conducted with an emphasis on characterizing the properties of the pressure fluctua- tions induced by the turbulent boundary layer (TBL) along the nozzle wall. The axisymmetric nozzle geometry and the flow conditions of the DNS match those of the Sandia Hypersonic Wind Tunnel at Mach 8. The mean and turbulence statistics of the nozzle-wall boundary layer show good agreement with those predicted by Pate’s correlation and Reynolds Averaged Navier-Stokes (RANS) computations. The wall-pressure intensity, power spectral density, and coherence predicted by DNS show good comparisons with those measured in the same tunnel. The Corcos model is found to deliver good prediction of wall pressure coherence over inter- mediate and high frequencies. The streamwise and spanwise decay constants at Mach 8 are similar to those predicted by DNS and experiments at lower supersonic Mach numbers. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email