Oxide dissolution is important for metal extraction from ores and has become an attractive route for the preparation of inks for thin film solution deposition; however, oxide dissolution is often kinetically challenging. While binary “alkahest” systems comprised of thiols and N -donor species, such as amines, are known to dissolve a wide range of oxides, the mechanism of dissolution and identity of the resulting solute(s) remain unstudied. Here, we demonstrate facile dissolution of both bulk synthetic and natural mineral ZnO samples using an “alkahest” that operates via reaction with thiophenol and 1-methylimidazole (MeIm) to give a single, pseudotetrahedral Zn(SPh) 2 (MeIm) 2 molecular solute identified by X-ray crystallography. The kinetics of ZnO dissolution were measured using solution 1 H NMR, and the reaction was found to be zero-order in the presence of excess ligands, with more electron withdrawing para -substituted thiophenols resulting in faster dissolution. A negative entropy of activation was measured by Eyring analysis, indicating associative ligand binding in, or prior to, the rate determining step. Combined experimental and computational surface binding studies on ZnO reveal stronger, irreversible thiophenol binding compared to MeIm, leading to a proposed dissolution mechanism initiated by thiol binding to the ZnO surface with the liberation of water, followed by alternating MeIm and thiolate ligand additions, and ultimately cleavage of the ligated zinc complex from the ZnO surface. Design rules garnered from the mechanistic insight provided by this study should inform the dissolution of other bulk oxides into inks for solution processed thin films.
more »
« less
Emerging investigator series: characterization of silver and silver nanoparticle interactions with zinc finger peptides
In biological systems, chemical and physical transformations of engineered silver nanomaterials (AgENMs) are mediated, in part, by proteins and other biomolecules. Metalloprotein interactions with AgENMs are also central in understanding toxicity, antimicrobial, and resistance mechanisms. Despite their readily available thiolate and amine ligands, zinc finger (ZF) peptides have thus far escaped study in reaction with AgENMs and their Ag( i ) oxidative dissolution product. We report spectroscopic studies that characterize AgENM and Ag( i ) interactions with two ZF peptides that differ in sequence, but not in metal binding ligands: the ZF consensus peptide CP-CCHC and the C-terminal zinc finger domain of HIV-1 nucleocapsid protein p7 (NCp7_C). Both ZF peptides catalyze AgENM (10 and 40 nm, citrate coated) dissolution and agglomeration, two important AgENM transformations that impact bioreactivity. AgENMs and their oxidative dissolution product, Ag( i )(aq), mediate changes to ZF peptide structure and metalation as well. Spectroscopic titrations of Ag( i ) into apo-ZF peptides show an Ag( i )–thiolate charge transfer band, indicative of Ag( i )–ZF binding. Fluorescence studies of the Zn( ii )–NCp_7 complex indicate that the Ag( i ) also effectively competes with the Zn( ii ) to drive Zn( ii ) displacement from the ZFs. Upon interaction with AgENMs, Zn( ii ) bound ZF peptides show a secondary structural change in circular dichroism spectroscopy toward an apo-like structure. The results suggest that Ag( i ) and AgENMs may alter ZF protein function within the cell.
more »
« less
- NSF-PAR ID:
- 10107347
- Date Published:
- Journal Name:
- Environmental Science: Nano
- ISSN:
- 2051-8153
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Cysteine sulfonic acid (Cys-SO3H; cysteic acid) is an oxidative post-translational modification of cysteine, resulting from further oxidation from cysteine sulfinic acid (Cys- SO2H). Cysteine sulfonic acid is considered an irreversible post-translational modification, which serves as a biomarker of oxidative stress that has resulted in oxidative damage to proteins. Cysteine sulfonic acid is anionic, as a sulfonate (Cys-SO –; cysteate), in the ionization state that 3 is almost exclusively present at physiological pH (pKa ~ –2). In order to understand protein structural changes that can occur upon oxidation to cysteine sulfonic acid, we analyzed its conformational preferences, using experimental methods, bioinformatics, and DFT-based computational analysis. Cysteine sulfonic acid was incorporated into model peptides for α-helix and polyproline II helix (PPII). Within peptides, oxidation of cysteine to the sulfonic acid proceeds rapidly and efficiently at room temperature in solution with methyltrioxorhenium (MeReO3) and H2O2. Peptides containing cysteine sulfonic acid were also generated on solid phase using trityl-protected cysteine and oxidation with MeReO3 and H2O2. Using methoxybenzyl (Mob)-protected cysteine, solid-phase oxidation with MeReO3 and H2O2 generated the Mob sulfone precursor to Cys-SO – within fully synthesized peptides. These two solid-phase methods allow the synthesis of peptides containing either Cys-SO – or Cys-SO – in a 32 practical manner, with no solution-phase synthesis required. Cys-SO – had low PPII propensity 3 for PPII propagation, despite promoting a relatively compact conformation in φ. In contrast, in a PPII initiation model system, Cys-SO – promoted PPII relative to neutral Cys, with PPII initiation similar to Cys thiolate but less than Cys-SO – or Ala. In an α-helix model system, Cys- 2 SO – promoted α-helix near the N-terminus, due to favorable helix dipole interactions and 3 favorable α-helix capping via a sulfonate-amide side chain-main chain hydrogen bond. Across all peptides, the sulfonate side chain was significantly less ordered than that of the sulfinate. Analysis of Cys-SO – in the PDB revealed a very strong propensity for local (i/i or i/i+1) side 3 chain-main chain sulfonate-amide hydrogen bonds for Cys-SO –, with > 80% of Cys-SO – 33 residues exhibiting these interactions. DFT calculations conducted to explore these conformational preferences indicated that side chain-main chain hydrogen bonds of the sulfonate with the intraresidue amide and/or with the i+1 amide were favorable. However, hydrogen bonds to water or to amides, as well as interactions with oxophilic metals, were weaker for the sulfonate than the sulfinate, due to lower charge density on the oxygens in the sulfonate.more » « less
-
Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale electrical energy storage due to the inexpensive, safe, and non-toxic nature of zinc. One key area that requires further development is electrode materials that store Zn 2+ ions with high reversibility and fast kinetics. To determine the viability of low-cost organosulfur compounds as OEMs for AZIBs, we investigate how structural modification affects electrochemical performance in Zn-thiolate complexes 1 and 2. Remarkably, modification of one thiolate in 1 to sulfide in 2 reduces the voltage hysteresis from 1.04 V to 0.15 V. While 1 exhibits negligible specific capacity due to the formation of insulating DMcT polymers, 2 delivers a capacity of 107 mA h g −1 with a primary discharge plateau at 1.1 V vs. Zn 2+ /Zn. Spectroscopic studies of 2 suggest a Zn 2+ and H + co-insertion mechanism with Zn 2+ as the predominant charge carrier. Capacity fading in Zn-2 cells likely results from the formation of (i) soluble H + insertion products and (ii) non-redox-active side products. Increasing electrolyte concentration and using a Nafion membrane significantly enhances the stability of 2 by suppressing H + insertion. Our findings provide insight into the molecular design strategies to reduce the polarization potential and improve the cycling stability of the thiolate/disulfide redox couple in aqueous battery systems.more » « less
-
more » « less
Abstract Hydrogenase enzymes produce H2gas, which can be a potential source of alternative energy. Inspired by the [NiFe] hydrogenases, we report the construction of a de novo‐designed artificial hydrogenase (ArH). The ArH is a dimeric coiled coil where two cysteine (Cys) residues are introduced at tandem
a /d positions of a heptad to create a tetrathiolato Ni binding site. Spectroscopic studies show that Ni binding significantly stabilizes the peptide producing electronic transitions characteristic of Ni‐thiolate proteins. The ArH produces H2photocatalytically, demonstrating a bell‐shaped pH‐dependence on activity. Fluorescence lifetimes and transient absorption spectroscopic studies are undertaken to elucidate the nature of pH‐dependence, and to monitor the reaction kinetics of the photochemical processes. pH titrations are employed to determine the role of protonated Cys on reactivity. Through combining these results, a fine balance is found between solution acidity and the electron transfer steps. This balance is critical to maximize the production of NiI‐peptide and protonation of the NiII−H−intermediate (Ni−R) by a Cys (pK a≈6.4) to produce H2. -
more » « less
Abstract De novo design provides an attractive approach, which allows one to test and refine the principles guiding metalloproteins in defining the geometry and reactivity of their metal ion cofactors. Although impressive progress has been made in designing proteins that bind transition metal ions including iron–sulfur clusters, the design of tetranuclear clusters with oxygen‐rich environments remains in its infancy. In previous work, we described the design of homotetrameric four‐helix bundles that bind tetra‐Zn2+clusters. The crystal structures of the helical proteins were in good agreement with the overall design, and the metal‐binding and conformational properties of the helical bundles in solution were consistent with the crystal structures. However, the correspondingapo ‐proteins were not fully folded in solution. In this work, we design three peptides, based on the crystal structure of the original bundles. One of the peptides forms tetramers in aqueous solution in the absence of metal ions as assessed by CD and NMR. It also binds Zn2+in the intended stoichiometry. These studies strongly suggest that the desired structure has been achieved in theapo state, providing evidence that the peptide is able to actively impart the designed geometry to the metal cluster.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/C9EN00065H
