Ultrathin and two-dimensional (2D) metals can support strong plasmons, with concomitant tight field confinement and large field enhancement. Accordingly, 2D-metal nanostructures exhibiting plasmonic resonances are highly sensitive to the environment and intrinsically suitable for optical sensing. Here, based on a proof-of-concept numerical study, nano-engineered ultrathin 2D-metal films that support infrared plasmons are demonstrated to enable highly responsive refractive index (RI) sensing. For 3 nm-Au nanoribbons exhibiting plasmonic resonances at wavelengths around 1600 nm, a RI sensitivity of SRI > 650 nm per refractive index unit (RIU) is observed for a 100 nm-thick analyte layer. A parametric study of the 2D-Au system indicates the strong dependence of the RI sensitivity on the 2D-metal thickness. Furthermore, for an analyte layer as thin as 1 nm, a RI sensitivity up to 110 (90 nm/RIU) is observed in atomically thin 2D-In (2D-Ga) nanoribbons exhibiting highly localized plasmonic resonances at mid-infrared wavelengths. Our results not only reveal the extraordinary sensing characteristics of 2D-metal systems but also provide insight into the development of 2D-metal-based plasmonic devices for enhanced IR detection.
more »
« less
A semi-analytical decomposition analysis of surface plasmon generation and the optimal nanoledge plasmonic device
Surface plasmon resonance (SPR) of nanostructured thin metal films (so-called nanoplasmonics) has attracted intense attention due to its versatility for optical sensing and chip-based device integration. Understanding the underlying physics and developing applications of nanoplasmonic devices with desirable optical properties, e.g. intensity of light scattering and high refractive index (RI) sensitivity at the perforated metal film, is crucial for practical uses in physics, biomedical detection, and environmental monitoring. This work presents a semi-analytical model that enables decomposition and quantitative analysis of surface plasmon generation at a new complex nanoledge aperture structure under plane-wave illumination, thus providing insight on how to optimize plasmonic devices for optimal plasmonic generation efficiencies and RI sensitivity. A factor analysis of parameters (geometric, dielectric-RI, and incident wavelength) relevant to surface plasmon generation is quantitatively investigated to predict the surface plasmon polariton (SPP) generation efficiency. In concert with the analytical treatment, a finite-difference time-domain (FDTD) simulation is used to model the optical transmission spectra and RI sensitivity as a function of the nanoledge device's geometric parameters, and it shows good agreement with the analytical model. Further validation of the analytical approach is provided by fabricating subwavelength nanoledge devices and testing their optical transmission and RI sensitivity.
more »
« less
- Award ID(s):
- 1511194
- PAR ID:
- 10111219
- Date Published:
- Journal Name:
- RSC Advances
- Volume:
- 6
- Issue:
- 21
- ISSN:
- 2046-2069
- Page Range / eLocation ID:
- 17196 to 17203
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Surface Plasmon Polariton (SPP), as a novel information carrier, offers unprecedented opportunity for confining electromagnetic fields that carry orbital angular momentum (OAM) to subwavelength dimensions. In this thesis, I focus experimentally on the generation, manipulation, and spatio-temporal evolution—and theoretically on the analytical modeling—of plasmonic phase singularities, known as plasmonic vortices, at the silver (Ag)/vacuum interface. I image and study the dynamics of plasmonic vortices by interferometric time-resolved multi-photon photoemission electron microscopy (ITR-mP-PEEM). Firstly, I report on the generation, evolution, and topological properties of plasmonic vortices carrying pure geometrically induced orbital angular momentum (OAM), generated by illuminating Archimedean spiral coupling structures with normally incident, linearly polarized light. Next, I present an analytical model describing the generation and evolution of these plasmonic vortices, and based on this model, I further analyze their spatial structure and dynamics. I also derived the spin angular momentum (SAM) of plasmonic vortices, whose textures reveal transient plasmonic spin-Skyrmion topological quasiparticles. In parallel, I also record images of plasmonic vectoral vortex field evolution on the nanometer spatial and femtosecond temporal scale, from which I derive the plasmonic spin Skyrmion boundary and topological charge. The excellent agreement between analytical model and experimental results confirms the topological spin texture at surface plasmon polariton vortex core. To extend the understanding of ITR-PEEM imaging, I perform a simple experiment withv double line coupling structure at the silver/vacuum interface, which reveals an asymmetric cross term between the different components of the SPP field that also appear in the ITR-PEEM imaging. Finally, I approach a novel method to manipulate momentum transport between two plasmonic vortices analytically and experimentally. By tuning the relative distance between two vortex generator structures with same sign and sign of the geometric charge, a conveyor belt-like field could be observed at the center of the device, which can be applied to transport the field, momentum, and energy between two plasmonic vortices.more » « less
-
Abstract Refractive index (RI) sensors are of great interest for label-free optical biosensing. A tapered optical fiber (TOF) RI sensor with micron-sized waist diameters can dramatically enhance sensor sensitivity by reducing the mode volume over a long distance. Here, a simple and fast method is used to fabricate highly sensitive refractive index sensors based on localized surface plasmon resonance (LSPR). Two TOFs (l = 5 mm) with waist diameters of 5 µm and 12 µm demonstrated sensitivity enhancement at λ = 1559 nm for glucose sensing (5–45 wt%) at room temperature. The optical power transmission decreased with increasing glucose concentration due to the interaction of the propagating light in the evanescent field with glucose molecules. The coating of the TOF with gold nanoparticles (AuNPs) as an active layer for glucose sensing generated LSPR through the interaction of the evanescent wave with AuNPs deposited at the tapered waist. The results indicated that the TOF (Ø = 5 µm) exhibited improved sensing performance with a sensitivity of 1265%/RIU compared to the TOF (Ø = 12 µm) at 560%/RIU towards glucose. The AuNPs were characterized using scanning electron microscopy and ultraviolent-visible spectroscopy. The AuNPs-decorated TOF (Ø = 12 µm) demonstrated a high sensitivity of 2032%/RIU toward glucose. The AuNPs-decorated TOF sensor showed a sensitivity enhancement of nearly 4 times over TOF (Ø = 12 µm) with RI ranging from 1.328 to 1.393. The fabricated TOF enabled ultrasensitive glucose detection with good stability and fast response that may lead to next-generation ultrasensitive biosensors for real-world applications, such as disease diagnosis.more » « less
-
Abstract Light coupling with patterned subwavelength hole arrays induces enhanced transmission supported by the strong surface plasmon mode. In this work, a nanostructured plasmonic framework with vertically built‐in nanohole arrays at deep‐subwavelength scale (6 nm) is demonstrated using a two‐step fabrication method. The nanohole arrays are formed first by the growth of a high‐quality two‐phase (i.e., Au–TiN) vertically aligned nanocomposite template, followed by selective wet‐etching of the metal (Au). Such a plasmonic nanohole film owns high epitaxial quality with large surface coverage and the structure can be tailored as either fully etched or half‐way etched nanoholes via careful control of the etching process. The chemically inert and plasmonic TiN plays a role in maintaining sharp hole boundary and preventing lattice distortion. Optical properties such as enhanced transmittance and anisotropic dielectric function in the visible regime are demonstrated. Numerical simulation suggests an extended surface plasmon mode and strong field enhancement at the hole edges. Two demonstrations, including the enhanced and modulated photoluminescence by surface coupling with 2D perovskite nanoplates and the refractive index sensing by infiltrating immersion liquids, suggest the great potential of such plasmonic nanohole array for reusable surface plasmon‐enhanced sensing applications.more » « less
-
We present a transient response study of a semiconductor based plasmonic switch. The proposed device operates through active control and modulation of localized electron density waves, i.e., surface plasmon polaritons (SPPs) at degenerately doped In0.53Ga0.47As based PN++junctions. A set of devices is designed and fabricated, and its optical and electronic behaviors are studied both experimentally and theoretically. Optical characterization shows far-field reflectivity modulation, a result of electrical tuning of the SPPs at the PN++junctions for mid-IR wavelengths, with significant 3 dB bandwidths. Numerical studies using a self-consistent electro-optic multi-physics model are performed to uncover the temporal response of the devices’ electromagnetic and kinetic mechanisms facilitating the SPP switching at the PN++junctions. Numerical simulations show strong synergy with the experimental results, validating the claim of potential optoelectronic switching with a 3 dB bandwidth as high as 2 GHz. Thus, this study confirms that the presented SPP diode architecture can be implemented for high-speed control of SPPs through electrical means, providing a pathway toward fast all-semiconductor plasmonic devices.more » « less
An official website of the United States government

