skip to main content


Title: Plume-SPH 1.0: a three-dimensional, dusty-gas volcanic plume model based on smoothed particle hydrodynamics

Abstract. Plume-SPH provides the first particle-based simulation ofvolcanic plumes. Smoothed particle hydrodynamics (SPH) has several advantagesover currently used mesh-based methods in modeling of multiphase freeboundary flows like volcanic plumes. This tool will provide more accurateeruption source terms to users of volcanic ash transport anddispersion models (VATDs), greatly improving volcanic ash forecasts. The accuracy ofthese terms is crucial for forecasts from VATDs, and the 3-D SPH modelpresented here will provide better numerical accuracy. As an initial effortto exploit the feasibility and advantages of SPH in volcanic plume modeling,we adopt a relatively simple physics model (3-D dusty-gas dynamic modelassuming well-mixed eruption material, dynamic equilibrium and thermodynamicequilibrium between erupted material and air that entrained into the plume,and minimal effect of winds) targeted at capturing the salient features of avolcanic plume. The documented open-source code is easily obtained andextended to incorporate other models of physics of interest to the largecommunity of researchers investigating multiphase free boundary flows ofvolcanic or other origins.

The Plume-SPH code (https://doi.org/10.5281/zenodo.572819) also incorporates several newly developed techniques inSPH needed to address numerical challenges in simulating multiphasecompressible turbulent flow. The code should thus be also of general interestto the much larger community of researchers using and developing SPH-basedtools. In particular, the SPHε turbulence model is used to capturemixing at unresolved scales. Heat exchange due to turbulence is calculated bya Reynolds analogy, and a corrected SPH is used to handle tensile instabilityand deficiency of particle distribution near the boundaries. We alsodeveloped methodology to impose velocity inlet and pressure outlet boundaryconditions, both of which are scarce in traditional implementations of SPH.

The core solver of our model is parallelized with the message passinginterface (MPI) obtaining good weak and strong scalability using novel techniquesfor data management using space-filling curves (SFCs), object creationtime-based indexing and hash-table-based storage schemes. These techniques areof interest to researchers engaged in developing particles in cell-typemethods. The code is first verified by 1-D shock tube tests, then bycomparing velocity and concentration distribution along the central axis andon the transverse cross with experimental results of JPUE (jet or plume thatis ejected from a nozzle into a uniform environment). Profiles of severalintegrated variables are compared with those calculated by existing 3-D plumemodels for an eruption with the same mass eruption rate (MER) estimated forthe Mt. Pinatubo eruption of 15 June 1991. Our results are consistent withexisting 3-D plume models. Analysis of the plume evolution processdemonstrates that this model is able to reproduce the physics of plumedevelopment.

 
more » « less
Award ID(s):
1821311
NSF-PAR ID:
10111349
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Geoscientific Model Development
Volume:
11
Issue:
7
ISSN:
1991-9603
Page Range / eLocation ID:
2691 to 2715
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    During explosive volcanic eruptions, volcanic ash is ejected into the atmosphere, impacting aircraft safety and downwind communities. These volcanic clouds tend to be dominated by fine ash (<63 μm in diameter), permitting transport over hundreds to thousands of kilometers. However, field observations show that much of this fine ash aggregates into clusters or pellets with faster settling velocities than individual particles. Models of ash transport and deposition require an understanding of aggregation processes, which depend on factors like moisture content and local particle collision rates. In this study, we develop a Plume Model for Aggregate Prediction, a one‐dimensional (1D) volcanic plume model that predicts the plume rise height, concentration of water phases, and size distribution of resulting ash aggregates from a set of eruption source parameters. The plume model uses a control volume approach to solve mass, momentum, and energy equations along the direction of the plume axis. The aggregation equation is solved using a fixed pivot technique and incorporates a sticking efficiency model developed from analog laboratory experiments of particle aggregation within a novel turbulence tower. When applied to the 2009 eruption of Redoubt Volcano, Alaska, the 1D model predicts that the majority of the plume is over‐saturated with water, leading to a high rate of aggregation. Although the mean grain size of the computed Redoubt aggregates is larger than the measured deposits, with a peak at 1 mm rather than 500 μm, the present results provide a quantitative estimate for the magnitude of aggregation in an eruption.

     
    more » « less
  2. Abstract

    Explosive eruptions expel volcanic gases and particles at high pressures and velocities. Within this multiphase fluid, small ash particles affect the flow dynamics, impacting mixing, entrainment, turbulence, and aggregation. To examine the role of turbulent particle behavior, we conducted an analogue experiment using a particle‐laden jet. We used compressed air as the carrier fluid, considering turbulent conditions at Reynolds numbers from approximately 5,000 to 20,000. Two different particles were examined: 14‐μm diameter solid nickel spheres and 13‐μm diameter hollow glass spheres. These resulted in Stokes numbers between 1 and 35 based on the convective scale. The particle mass percentage in the mixture is varied from 0.3% to more than 20%. Based on a 1‐D volcanic plume model, these Stokes numbers and mass loadings corresponded to millimeter‐scale particle diameters at heights of 4–8 km above the vent during large, sustained eruptions. Through particle image velocimetry, we measured the mean flow behavior and the turbulence statistics in the near‐exit region, primarily focusing on the dispersed phase. We show that the flow behavior is dominated by the particle inertia, with high Stokes numbers reducing the entrainment by more than 40%. When applied to volcanic plumes, these results suggest that high‐density particles can greatly increase the probability of column collapse.

     
    more » « less
  3. Abstract

    Explosive volcanic eruptions are one of the most important driver of climate variability. Yet, we still lack a fundamental understanding of how climate change may affect future eruptions. Here, we use an ensemble of simulations by 1‐D and 3‐D volcanic plume models spanning a large range of eruption source and atmospheric conditions to assess changes in the dynamics of future eruptive columns. Our results shed new light on differences between the predictions of 1‐D and 3‐D plume models. Furthermore, both models suggest that as a result of ongoing climate change, for tropical eruptions, (i) higher eruption intensities will be required for plumes to reach the upper troposphere/lower stratosphere and (ii) the height of plumes currently reaching the upper troposphere/lower stratosphere or above will increase. We discuss the implications of these results for the climatic impacts of future eruptions. Our simulations can directly inform climate model experiments on climate‐volcano feedback.

     
    more » « less
  4. Abstract

    Seismic waves are commonly used to monitor unrest before, during, and after volcanic eruptions. The source of seismic tremor during a sustained explosive volcanic eruption is not well understood. Recent observations of the 2016 eruption of Pavlof Volcano, Alaska, revealed a change in the relationship (hysteresis) between ash plume height and seismic amplitude over time. Based on similarities in physical processes and observed seismic tremor in rivers, we explore two key sources of seismic energy in the volcanic conduit: (1) forces exerted by particle impacts and (2) dynamic pressure changes by the turbulent flow. We develop a physical model calculating the seismic power spectral density (PSD), where forces on the conduit wall are convolved with the Green's function for Rayleigh waves. Using reasonable eruption parameters, the model is able to reproduce the frequency spectrum from the Pavlof eruption, although the modeled amplitudes are generally lower. We test the relative importance of different eruption parameters, including grain size, velocity, and conduit dimensions. We find that turbulence generally dominates over particle impacts. However, to reach the PSD amplitude during the Pavlof eruption, large grain sizes are required, as they have the greatest relative influence on the modeled amplitude. The hysteresis between plume height and seismic amplitude can then potentially be explained by grain size changes. The PSD shape is mostly determined by the Rayleigh‐wave quality factor Q, and substantial variations in seismic amplitude can be modeled assuming a constant mass eruption rate.

     
    more » « less
  5. Tephra is a unique volcanic product with an unparalleled role in understanding past eruptions, the long-term behavior of volcanoes, and the effects of volcanism on climate and the environment. Tephra deposits also provide spatially widespread, extremely high-resolution time-stratigraphic markers across a range of sedimentary settings and are used by many disciplines (e.g. volcanology, seismotectonics, climate science, archaeology, ecology, public health, ash impact assessment). The interdisciplinary shift in tephra studies over the last two decades is challenged by the lack of standardization that often prevents comparison amongst various regions and across disciplines. To address this challenge, the global tephra community has united through a series of workshops to establish best practice recommendations for tephra studies, including sample collection, analysis and data reporting (https://doi.org/10.5281/zenodo.3866266). This new standardized framework is being incorporated into digital tools and data repositories and supports FAIR (findable, accessible, interoperable and reusable) data principles. Widespread adoption will facilitate consistent tephra documentation and parametrization, foster interdisciplinary communication and improve the effectiveness of data sharing among diverse communities of researchers. Here we report on recent implementations of the best-practice recommendations including: 1) a set of templates for samples, methods documentation, and data reporting, 2) a tephra module in the StraboSpot field app (https://strabospot.org), 3) implementations at SESAR and EarthChem, including a tephra community portal (https://earthchem.org/communities/tephra/), 4) implementation in the Sparrow laboratory data system (https://sparrow-data.org/), and 5) a new manuscript supporting the framework. Data linking is facilitated by extensive use of unique identifiers including ORCIDs for people, IGSNs for field sites and samples; DOIs for publications, data, and methods; and Smithsonian IDs for volcanoes and eruptions. These developments allow users to follow simple workflows to archive data and facilitate faster access to key research by secondary users. 
    more » « less