- Award ID(s):
- 1653418
- NSF-PAR ID:
- 10123073
- Date Published:
- Journal Name:
- Polymer Chemistry
- ISSN:
- 1759-9954
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
null (Ed.)Polycyclic aromatic hydrocarbons (PAHs) are attractive synthetic building blocks for more complex conjugated nanocarbons, but their use for this purpose requires appreciable quantities of a PAH with reactive functional groups. Despite tremendous recent advances, most synthetic methods cannot satisfy these demands. Here we present a general and scalable [2 + 2 + n ] ( n = 1 or 2) cycloaddition strategy to access PAHs that are decorated with synthetically versatile alkynyl groups and its application to seven structurally diverse PAH ring systems (thirteen new alkynylated PAHs in total). The critical discovery is the site-selectivity of an Ir-catalyzed [2 + 2 + 2] cycloaddition, which preferentially cyclizes tethered diyne units with preservation of other (peripheral) alkynyl groups . The potential for generalization of the site-selectivity to other [2 + 2 + n ] reactions is demonstrated by identification of a Cp 2 Zr-mediated [2 + 2 + 1]/metallacycle transfer sequence for synthesis of an alkynylated, selenophene-annulated PAH. The new PAHs are excellent synthons for macrocyclic conjugated nanocarbons. As a proof of concept, four were subjected to alkyne metathesis catalysis to afford large, PAH-containing arylene ethylene macrocycles, which possess a range of cavity sizes reaching well into the nanometer regime. Notably, these high-yielding macrocyclizations establish that synthetically convenient pentynyl groups can be effective for metathesis since the 4-octyne byproduct is sequestered by 5 Å MS. Most importantly, this work is a demonstration of how site-selective reactions can be harnessed to rapidly build up structural complexity in a practical, scalable fashion.more » « less
-
Abstract Secondary organic aerosol (SOA) is key to our climate, affecting Earth’s radiative balance both indirectly and directly. Understanding the chemical composition and properties of SOA are crucial to accurately predict their concentrations and ultimately their impact on climate in models. Multiphase chemical reactions in the atmosphere have been found to form a variety of low-volatility, high-molecular-weight species, or oligomers. Although oligomers may constitute a large portion of SOA, they are not well understood. Most analytical techniques are unable to detect such high-mass organic species, so their formation and degradation mechanisms are still in need of investigation. Herein, we present a method using matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) to determine the oligomeric content of aerosol particles. We apply the method to analyze SOA particles formed from reactive uptake of IEPOX onto acidic ammonium sulfate seed particles during atmospheric chamber experiments. We compare the oligomeric content of the particles based on key properties, including particle acidity and exposure to oxidants. We compared multiple sample collection methods, including impaction into deionized water using a Liquid Spot Sampler (Aerosol Devices) and direct impaction onto a sampling plate. Our work will provide insight about the formation ofmore » « less
-
Abstract Main‐chain boron‐containing π‐conjugated polymers are attractive for organic electronic, sensing, and imaging applications. Alternating terthiophene‐borane polymers were prepared and the effects of regioisomeric attachment of the conjugated linker and variations in the electronic effect of the pendent aryl groups (2,4,6‐tri‐tert‐butylphenyl, Mes*; 2,4,6‐tris(trifluoromethyl)phenyl, FMes) examined. Pd2dba3/P(
t ‐Bu)3‐catalyzed Stille polymerization of arylbis(2‐thienyl)borane and arylbis(3‐thienylborane) with 2,5‐bis(trimethylstannyl)thiophene at 120 °C gave polymers with appreciable molecular weight but MALDI‐TOF MS analyses showed evidence of unusually prominent homocoupling. These defects could be suppressed by using brominated rather than iodinated monomers, more hindered 2,5‐bis(tri‐n ‐butylstannyl)thiophene as comonomer, and Pd2dba3/P(o‐ tol)3as the catalyst at 100 °C. Under these conditions, macrocyclic species withn =3–10 repeating units formed preferentially according to MALDI‐TOF MS analyses. Photophysical studies revealed a prominent effect of the regiochemistry and the nature of the pendent aryl groups on the absorption and emission, giving rise to orange, yellow‐green, blue‐green, and blue emissive materials respectively. The electronic effects were rationalized through DFT calculations on bis(terthiophene) model systems. -
Rationale Simple, affordable, and rapid methods for identifying the molecular weight (MW) distribution and macromolecular composition of polymeric materials are limited. Current tools require extensive solvent consumption, linear calibrations, and expensive consumables. A simple method for the determination of average MW (
M n,M w) and chain end groups is demonstrated for synthetic homopolymer standards using direct injection electrospray ionization‐mass spectrometry (ESI‐MS) and an open‐sourced charge deconvolution (CDC) algorithm.Methods Five homopolymer standards in the 1–7 kDa MW range were analyzed using direct‐injection ESI‐MS on a quadrupole/time‐of‐flight mass spectrometer. The samples investigated, viz. two poly(ethylene oxide) (PEO) and two poly(styrene sulfonic acid) (PSS) standards with narrow polydispersity and one poly(
d ,l ‐alanine) (pAla) standard with undefined polydispersity, were chosen to illustrate challenges with ESI‐MS quantitation. Using the UniDec program, weight average MWs (M w) obtained from the charge‐deconvoluted spectra were compared to the reportedM wdata of the standards from size exclusion chromatography (SEC) measurements.Results The MW data derived for the PSS, PEO, and pAla standards agreed well with the corresponding reported
M wor MW range values. The method was able to provide MW, degree of polymerization (DP), and polydispersity index (PDI) information for polymers with narrow (PSS, PEO) as well as broader (pAla) molecular weight distribution; this feature provides an advantage over MW analysis via matrix‐assisted laser desorption/ionization (MALDI) for ESI‐compatible materials. PSS standards differing in average MW by only a few repeat units could be confidently distinguished. Additionally, the oligomeric resolution observed for all samples studied unveiled chain‐end information not available through chromatographic analysis.Conclusions Overall, the free and easy‐to‐use UniDec CDC algorithm provides a simple, alternative method to measuring MW and DP for polymeric materials without high solvent consumption, expensive ionization sources, or calibration curves. Information about the masses of individual oligomers and the possibility to further characterize these oligomers using tandem mass spectrometry and/or ion mobility techniques constitutes additional benefits of this approach vis‐à‐vis traditional MW and PDI elucidation through SEC.
-
Abstract Nanotubes assembled from macrocyclic precursors offer a unique combination of low dimensionality, structural rigidity, and distinct interior and exterior microenvironments. Usually the weak stacking energies of macrocycles limit the length and mechanical strength of the resultant nanotubes. Imine‐linked macrocycles were recently found to assemble into high‐aspect ratio (>103), lyotropic nanotubes in the presence of excess acid. Yet these harsh conditions are incompatible with many functional groups and processing methods, and lower acid loadings instead catalyze macrocycle degradation. Here we report pyridine‐2,6‐diimine‐linked macrocycles that assemble into high‐aspect ratio nanotubes in the presence of less than 1 equiv of CF3CO2H per macrocycle. Analysis by gel permeation chromatography and fluorescence spectroscopy revealed a cooperative self‐assembly mechanism. The low acid concentrations needed to induce assembly enabled nanofibers to be obtained by touch‐spinning, which exhibit higher Young's moduli (1.33 GPa) than many synthetic polymers and biological filaments. These findings represent a breakthrough in the design of inverse chromonic liquid crystals, as assembly under such mild conditions will enable the design of structurally diverse and mechanically robust nanotubes from synthetically accessible macrocycles.