An official website of the United States government
Multi-stable structures have gathered extensive interest because they can provide a broad spectrum of adaptive functions for many engineering systems. Especially, origami sheets with a translational periodicity can be stacked and assembled to form a multi-stable cellular solid, which has emerged as a promising platform to design functional structures. This paper investigates the multi-stability characteristics of a non-rigid stacked Miura-origami mechanism consisting of Miura-ori sheets and accordion-shaped connecting sheets, focusing on the elemental unit cell. A nonlinear mechanical model based on the barhinge approach is established to quantitatively study the unit cell’s multi-stability with intentionally relaxed rigid-folding conditions. Results show that only two stable states are achievable in the unit cell with enforced rigid-folding kinematics. However, if one relaxes the rigid-folding conditions and allows the facet to deform (i.e. non-rigid folding), four stable states are reachable in the unit cell if the crease torsional stiffness of the connecting sheets becomes sufficiently larger than that of the Miura-ori sheets, or the stress-free folding angle deviates away from 0°. A close examination of the potential energy composition of the non-rigid unit cell provides a detailed principle underpinning the multi-stability. By showing the benefits of exploiting facet compliance, this study can become the building blocks for origami-based structures and material systems with a wider variety of novel functionalities.
more »
« less
Exploiting the Asymmetric Energy Barrier in Multi-Stable Origami to Enable Mechanical Diode Behavior in Compression
Recently, multi-stable origami structures and material systems have shown promising potentials to achieve multi-functionality. Especially, origami folding is fundamentally a three-dimensional mechanism, which imparts unique capabilities not seen in the more traditional multi-stable systems. This paper proposes and analytically examines a multi-stable origami cellular structure that can exhibit asymmetric energy barriers and a mechanical diode behavior in compression. Such a structure consists of many stacked Miura-ori sheets of different folding stiffness and accordion-shaped connecting sheets, and it can be divided into unit cells that features two different stable equilibria. To understand the desired diode behavior, this study focuses on two adjacent unit cells and examines how folding can create a kinematic constraint onto the deformation of these two cells. Via estimating the elastic potential energy landscape of this dual cell system. we find that the folding-induced kinematic constraint can significantly increase the potential energy barrier for compressing the dual-cell structure from a certain stable state to another, however, the same constraint would not increase the energy barrier of the opposite extension switch. As a result, one needs to apply a large force to compress the origami cellular structure but only a small force to stretch it, hence a mechanical diode behavior. Results of this study can open new possibilities for achieving structural motion rectifying, wave propagation control, and embedded mechanical computation.
more »
« less
- PAR ID:
- 10128904
- Date Published:
- Journal Name:
- ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
- Volume:
- 5B
- Page Range / eLocation ID:
- DETC2019-97420
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This study examines a three-dimensional, anisotropic multistability of a mechanical meta material based on a stacked Miura-ori architecture, and investigates how such a unique stability property can impart stiffness and effective modulus programming functions. The unit cell of this metamaterial can be bistable due to the nonlinear relationship between rigid-folding and crease material bending. Such bistability possesses an unorthodox property: the arrangement of elastically stable and unstable equilibria are different along different principal axes of the unit cell, so that along certain axes the unit cell exhibits two force–deformation relationships concurrently within the same range of deformation. Therefore, one can achieve a notable stiffness adaptation via switching between the two stable states. As multiple unit cells are assembled into a metamaterial, the stiffness adaptation can be aggregated into an on-demand modulus programming capability. That is, via strategically switching different unit cells between stable states, one can control the overall effective modulus. This research examines the underlying principles of anisotropic multistability, experimentally validates the feasibility of stiffness adaptation, and conducts parametric analyses to reveal the correlations between the effective modulus programming and Miura-ori designs. The results can advance many adaptive systems such as morphing structures and soft robotics.more » « less
-
Harnessing instabilities of multicomponent multistable structural assemblies can potentially lead to scalable and reversible functionalities, which can be enhanced by exploring frustration. For instance, standard Kresling origami cells exhibit nontunable intrinsic energy landscapes determined by their geometry and material properties, limiting their adaptability after fabrication. To overcome this limitation, we introduce frustration to enable fine-tuning of the energy landscape and resulting deformation states. By prestressing the Kresling cell by means of special springs with individual control, we induce either global or localized (i.e., crease level) frustration, which allows changing the energy barrier (cell or assembly). We investigate the mechanical behavior of frustrated Kresling assemblies, both theoretically and experimentally, under various loading and boundary conditions. Our findings reveal that changing the frustration state leads to precise control of folding sequences, enabling previously inaccessible folding paths. The proposed concept paves the way for applications in mechanical metamaterials and other fields requiring highly programmable and reconfigurable systems – e.g., prosthetic limbs.more » « less
-
Origami provides a flexible platform for constructing three-dimensional multi-stable mechanical metamaterials and structures. While possessing many interesting features originating from folding, the development of multi-stable origami structures is faced with tremendous demands for acquiring tunability and adaptability. Through an integration of origami folding with magnets, this research proposes a novel approach to synthesize and harness multi-stable magneto-origami structures. Based on the stacked Miura-ori and the Kresling ori structures, we reveal that the embedded magnets could effectively tune the structure’s potential energy landscapes, which includes not only altering the position and the depth of the potential wells but essentially eliminating the intrinsic potential wells or generating new potential wells. Such magnet-induced evolutions of potential energy landscapes would accordingly change the origami structure’s stability profiles and the constitutive force–displacement relations. Based on proof-ofconcept prototypes with permeant magnets, the theoretically predicted effects of magnets are verified. The exploration is also extended to the dynamics realm. Numerical studies suggest that the incorporated magnets not only could translate the critical frequencies for achieving certain dynamical behaviors but also fundamentally adjust the frequency-amplitude relationship. Overall, this study shows that the proposed approach would provide a novel means to control the stability profile as well as the mechanics and dynamic characteristics of origami structures, and thus, inspire new innovations in designing adaptive mechanical metamaterials and structures.more » « less
-
We investigate the controllability of an origami system composed of Miura-ori cells. A substantial volume of research on folding architecture, kinematic behavior, and actuation techniques of origami structures has been conducted. However, understanding their transient dynamics and constructing control models remains a formidable task, primarily due to their innate flexibility and compliance. In light of this challenge, we discretize the origami system into a network composed of interconnected particle masses alongside bar and hinge elements. This yields a state-space representation of the system's dynamics, enabling us to obtain the system's controllability attributes. Informed by this computational framework, we explore the controllability Gramian-based method for finding the most efficient crease line for Miura-ori cell deployment using an actuator. We demonstrate that the deployment efficiency guided by this theoretical method agrees with the empirical results obtained from the energy consumption to deploy the origami structure. This investigation paves the way toward designing and operating an efficient the complex actuation system for origami tessellations.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/DETC2019-97420
