An official website of the United States government
We compute steady planar incompressible flows and wall shapes that maximize the rate of heat transfer ($$Nu$$) between hot and cold walls, for a given rate of viscous dissipation by the flow ($$Pe^2$$), with no-slip boundary conditions at the walls. In the case of no flow, we show theoretically that the optimal walls are flat and horizontal, at the minimum separation distance. We use a decoupled approximation to show that flat walls remain optimal up to a critical non-zero flow magnitude. Beyond this value, our computed optimal flows and wall shapes converge to a set of forms that are invariant except for a$$Pe^{-1/3}$$scaling of horizontal lengths. The corresponding rate of heat transfer$$Nu \sim Pe^{2/3}$$. We show that these scalings result from flows at the interface between the diffusion-dominated and convection-dominated regimes. We also show that the separation distance of the walls remains at its minimum value at large$$Pe$$.
more »
« less
Wall-to-wall optimal transport in two dimensions
Gradient ascent methods are developed to compute incompressible flows that maximize heat transport between two isothermal no-slip parallel walls. Parameterizing the magnitude of the velocity fields by a Péclet number $Pe$ proportional to their root-mean-square rate of strain, the schemes are applied to compute two-dimensional flows optimizing convective enhancement of diffusive heat transfer, i.e. the Nusselt number $Nu$ up to $$Pe\approx 10^{5}$$ . The resulting transport exhibits a change of scaling from $$Nu-1\sim Pe^{2}$$ for $Pe<10$ in the linear regime to $$Nu\sim Pe^{0.54}$$ for $$Pe>10^{3}$$ . Optimal fields are observed to be approximately separable, i.e. products of functions of the wall-parallel and wall-normal coordinates. Analysis employing a separable ansatz yields a conditional upper bound $${\lesssim}Pe^{6/11}=Pe^{0.\overline{54}}$$ as $$Pe\rightarrow \infty$$ similar to the computationally achieved scaling. Implications for heat transfer in buoyancy-driven Rayleigh–Bénard convection are discussed.
more »
« less
- PAR ID:
- 10142607
- Date Published:
- Journal Name:
- Journal of Fluid Mechanics
- Volume:
- 889
- ISSN:
- 0022-1120
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The central open question about Rayleigh–Bénard convection – buoyancy-driven flow in a fluid layer heated from below and cooled from above – is how vertical heat flux depends on the imposed temperature gradient in the strongly nonlinear regime where the flows are typically turbulent. The quantitative challenge is to determine how the Nusselt number $Nu$ depends on the Rayleigh number $Ra$ in the $$Ra\to \infty$$ limit for fluids of fixed finite Prandtl number $Pr$ in fixed spatial domains. Laboratory experiments, numerical simulations and analysis of Rayleigh's mathematical model have yet to rule out either of the proposed ‘classical’ $$Nu \sim Ra^{1/3}$$ or ‘ultimate’ $$Nu \sim Ra^{1/2}$$ asymptotic scaling theories. Among the many solutions of the equations of motion at high $Ra$ are steady convection rolls that are dynamically unstable but share features of the turbulent attractor. We have computed these steady solutions for $Ra$ up to $$10^{14}$$ with $Pr=1$ and various horizontal periods. By choosing the horizontal period of these rolls at each $Ra$ to maximize $Nu$ , we find that steady convection rolls achieve classical asymptotic scaling. Moreover, they transport more heat than turbulent convection in experiments or simulations at comparable parameters. If heat transport in turbulent convection continues to be dominated by heat transport in steady rolls as $$Ra\to \infty$$ , it cannot achieve the ultimate scaling.more » « less
-
Abstract We theoretically study forced convection heat transfer from a single particle in uniform laminar flows. Asymptotic limits of small and large Peclet numbers Pe are considered. For Pe≪1 (diffusion-dominated regime) and a constant heat flux boundary condition on the surface of the particle, we derive a closed-form expression for the heat transfer coefficient that is valid for arbitrary particle shapes and Reynolds numbers, as long as the flow is incompressible. Remarkably, our formula for the average Nusselt number Nu has an identical form to the one obtained by Brenner for a uniform temperature boundary condition (Chem. Eng. Sci., vol. 18, 1963, pp. 109–122). We also present a framework for calculating the average Nu of axisymmetric and two-dimensional (2D) objects with a constant heat flux surface condition in the limits of Pe≫1 and small or moderate Reynolds numbers. Specific results are presented for the heat transfer from spheroidal particles in Stokes flow.more » « less
-
null (Ed.)We use well resolved numerical simulations with the lattice Boltzmann method to study Rayleigh–Bénard convection in cells with a fractal boundary in two dimensions for $Pr = 1$ and $$Ra \in \left [10^7, 10^{10}\right ]$$ , where Pr and Ra are the Prandtl and Rayleigh numbers. The fractal boundaries are functions characterized by power spectral densities $S(k)$ that decay with wavenumber, $$k$$ , as $$S(k) \sim k^{p}$$ ( $p < 0$ ). The degree of roughness is quantified by the exponent $$p$$ with $p < -3$ for smooth (differentiable) surfaces and $$-3 \le p < -1$$ for rough surfaces with Hausdorff dimension $$D_f=\frac {1}{2}(p+5)$$ . By computing the exponent $$\beta$$ using power law fits of $$Nu \sim Ra^{\beta }$$ , where $Nu$ is the Nusselt number, we find that the heat transport scaling increases with roughness through the top two decades of $$Ra \in \left [10^8, 10^{10}\right ]$$ . For $$p$$ $= -3.0$ , $-2.0$ and $-1.5$ we find $$\beta = 0.288 \pm 0.005, 0.329 \pm 0.006$$ and $$0.352 \pm 0.011$$ , respectively. We also find that the Reynolds number, $Re$ , scales as $$Re \sim Ra^{\xi }$$ , where $$\xi \approx 0.57$$ over $$Ra \in \left [10^7, 10^{10}\right ]$$ , for all $$p$$ used in the study. For a given value of $$p$$ , the averaged $Nu$ and $Re$ are insensitive to the specific realization of the roughness.more » « less
-
null (Ed.)In this study, we investigate and develop scaling laws as a function of external non-dimensional control parameters for heat and momentum transport for non-rotating, slowly rotating and rapidly rotating turbulent convection systems, with the end goal of forging connections and bridging the various gaps between these regimes. Two perspectives are considered, one where turbulent convection is viewed from the standpoint of an applied temperature drop across the domain and the other with a viewpoint in terms of an applied heat flux. While a straightforward transformation exist between the two perspectives indicating equivalence, it is found the former provides a clear set of connections that bridge between the three regimes. Our generic convection scalings, based upon an Inertial-Archimedean balance, produce the classic diffusion-free scalings for the non-rotating limit (NRL) and the slowly rotating limit (SRL). This is characterized by a free-falling fluid parcel on the global scale possessing a thermal anomaly on par with the temperature drop across the domain. In the rapidly rotating limit (RRL), the generic convection scalings are based on a Coriolis-Inertial-Archimedean (CIA) balance, along with a local fluctuating-mean advective temperature balance. This produces a scenario in which anisotropic fluid parcels attain a thermal wind velocity and where the thermal anomalies are greatly attenuated compared to the total temperature drop. We find that turbulent scalings may be deduced simply by consideration of the generic non-dimensional transport parameters --- local Reynolds $$Re_\ell = U \ell /\nu$$; local P\'eclet $$Pe_\ell = U \ell /\kappa$$; and Nusselt number $$Nu = U \vartheta/(\kappa \Delta T/H)$$ --- through the selection of physically relevant estimates for length $$\ell$$, velocity $$U$$ and temperature scales $$\vartheta$$ in each regime. Emergent from the scaling analyses is a unified continuum based on a single external control parameter, the convective Rossby number\JMA{,} $$\RoC = \sqrt{g \alpha \Delta T / 4 \Omega^2 H}$$, that strikingly appears in each regime by consideration of the local, convection-scale Rossby number $$\Rol=U/(2\Omega \ell)$$. Thus we show that $$\RoC$$ scales with the local Rossby number $$\Rol$$ in both the slowly rotating and the rapidly rotating regimes, explaining the ubiquity of $$\RoC$$ in rotating convection studies. We show in non-, slowly, and rapidly rotating systems that the convective heat transport, parameterized via $$Pe_\ell$$, scales with the total heat transport parameterized via the Nusselt number $Nu$. Within the rapidly-rotating limit, momentum transport arguments generate a scaling for the system-scale Rossby number, $$Ro_H$$, that, recast in terms of the total heat flux through the system, is shown to be synonymous with the classical flux-based `CIA' scaling, $$Ro_{CIA}$$. These, in turn, are then shown to asymptote to $$Ro_H \sim Ro_{CIA} \sim \RoC^2$$, demonstrating that these momentum transport scalings are identical in the limit of rapidly rotating turbulent heat transfer.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/jfm.2020.42
