skip to main content


Title: Error propagation from the PIV-based pressure gradient to the integrated pressure by the omni-directional integration method
Characterization of the accuracy of the pressure reconstruction methods is of critical importance in understanding their capabilities and limitations. This paper reports for the first time a comprehensive theoretical analysis, numerical simulation and experimental validation of the error propagation characteristics for the omni-directional integration method, which has been used for pressure reconstruction from the PIV measured pressure gradient. The analysis shows that the omni-directional integration provides an effective mechanism in reducing the sensitivity of the reconstructed pressure to the random noise imbedded in the measured pressure gradient. Both the numerical and experimental validation results show that the omni-directional integration methods, especially the rotating parallel ray method, have better performance in data accuracy than the conventional Poisson equation approach in reconstructing pressure from noise embedded experimental data.  more » « less
Award ID(s):
1933176
NSF-PAR ID:
10157385
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Proceedings of the 13th International Symposium on Particle Image Velocimetry
Page Range / eLocation ID:
3.4.B Pressure & Force IV
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Quantification of velocity and pressure fields over streambeds is important for predicting sediment mobility, benthic and hyporheic habitat qualities, and hyporheic exchange. Here, we report the first experimental investigation of reconstructed water surface elevations and three‐dimensional time‐averaged velocity and pressure fields quantified with non‐invasive image techniques for a three‐dimensional free surface flow around a barely submerged vertical cylinder over a plane bed of coarse granular sediment in a full‐scale flume experiment. Stereo particle image velocimetry coupled with a refractive index‐matched fluid measured velocity data at multiple closely‐spaced parallel and aligned planes. The time‐averaged pressure field was reconstructed using the Rotating Parallel Ray Omni‐Directional integration method to integrate the pressure gradient terms obtained by the balance of all the Reynolds‐Averaged Navier‐Stokes equation terms, which were evaluated with stereo particle image velocimetry. The detailed pressure field allows deriving the water surface profile deformed by the cylinder and hyporheic flows induced by the cylinder.

     
    more » « less
  2. Advisor: Dr. Guillermo Araya (Ed.)
    The present study provides fundamental knowledge on an issue in fluid dynamics that is not well understood: flow separation and its association with heat and contaminant transport. In the separated region, a swirling motion increases the fluid drag force on the object. Very often, this is undesirable because it can seriously reduce the performance of engineered devices such as aircraft and turbines. Furthermore, Computational Fluid Dynamics (CFD) has gained ground due to its relatively low cost, high accuracy, and versatility. The principal aim of this study is to numerically elucidate the details behind momentum and passive scalar transport phenomena during turbulent boundary layer separation resulting from a wall-curvature-driven pressure gradient. With Open- FOAM CFD software, the numerical discretization of Reynolds-Averaged Navier-Stokes and passive scalar transport equations will be described in two-dimensional domains via the assessment of two popular turbulence models (i.e., the Spalart-Allmaras and the K-w SST model). The computational domain reproduces a wind tunnel geometry from previously performed experiments by Baskaran et al. (JFM, vol. 182 and 232 “A turbulent flow over a curved hill.” Part 1 and Part 2). Only the velocity and pressure distribution were measured there, which will be used for validation purposes in the present study. A second aim in the present work is the scientific visualization of turbulent events and coherent structures via the ParaView toolkit and Unity game engine. Thus, fully immersive visualization approaches will be used via virtual reality (VR) and augmented reality (AR) technologies. A Virtual Wind Tunnel (VWT), developed for the VR approach, emulates the presence in a wind tunnel laboratory and has already employed fluid flow visualization from an existing numerical database with high temporal/spatial resolution, i.e., Direct Numeric Simulation (DNS). In terms of AR, a FlowVisXR app for smartphones and HoloLens has been developed for portability. It allows the user to see virtual 3D objects (i.e., turbulent coherent structures) invoked into the physical world using the device as the lens. 
    more » « less
  3. Objective: Inferring causal or effective connectivity between measured timeseries is crucial to understanding directed interactions in complex systems. This task is especially challenging in the brain as the underlying dynamics are not well-understood. This paper aims to introduce a novel causality measure called frequency-domain convergent cross-mapping (FDCCM) that utilizes frequency-domain dynamics through nonlinear state-space reconstruction. Method: Using synthesized chaotic timeseries, we investigate general applicability of FDCCM at different causal strengths and noise levels. We also apply our method on two resting-state Parkinson's datasets with 31 and 54 subjects, respectively. To this end, we construct causal networks, extract network features, and perform machine learning analysis to distinguish Parkinson's disease patients (PD) from age and gender-matched healthy controls (HC). Specifically, we use the FDCCM networks to compute the betweenness centrality of the network nodes, which act as features for the classification models. Result: The analysis on simulated data showed that FDCCM is resilient to additive Gaussian noise, making it suitable for real-world applications. Our proposed method also decodes scalp-EEG signals to classify the PD and HC groups with approximately 97% leave-one-subject-out cross-validation accuracy. We compared decoders from six cortical regions to find that features derived from the left temporal lobe lead to a higher classification accuracy of 84.5% compared to other regions. Moreover, when the classifier trained using FDCCM networks from one dataset was tested on an independent out-of-sample dataset, it attained an accuracy of 84%. This accuracy is significantly higher than correlational networks (45.2%) and CCM networks (54.84%). Significance: These findings suggest that our spectral-based causality measure can improve classification performance and reveal useful network biomarkers of Parkinson's disease. 
    more » « less
  4. Surface albedo is of crucial interest in land–climate interaction studies, since it is a key parameter that affects the Earth’s radiation budget. The temporal and spatial variation of surface albedo can be retrieved from conventional satellite observations after a series of processes, including atmospheric correction to surface spectral bi-directional reflectance factor (BRF), bi-directional reflectance distribution function (BRDF) modelling using these BRFs, and, where required, narrow-to-broadband albedo conversions. This processing chain introduces errors that can be accumulated and then affect the accuracy of the retrieved albedo products. In this study, the albedo products derived from the multi-angle imaging spectroradiometer (MISR), moderate resolution imaging spectroradiometer (MODIS) and the Copernicus Global Land Service (CGLS), based on the VEGETATION and now the PROBA-V sensors, are compared with albedometer and upscaled in situ measurements from 19 tower sites from the FLUXNET network, surface radiation budget network (SURFRAD) and Baseline Surface Radiation Network (BSRN) networks. The MISR sensor onboard the Terra satellite has 9 cameras at different view angles, which allows a near-simultaneous retrieval of surface albedo. Using a 16-day retrieval algorithm, the MODIS generates the daily albedo products (MCD43A) at a 500-m resolution. The CGLS albedo products are derived from the VEGETATION and PROBA-V, and updated every 10 days using a weighted 30-day window. We describe a newly developed method to derive the two types of albedo, which are directional hemispherical reflectance (DHR) and bi-hemispherical reflectance (BHR), directly from three tower-measured variables of shortwave radiation: downwelling, upwelling and diffuse shortwave radiation. In the validation process, the MISR, MODIS and CGLS-derived albedos (DHR and BHR) are first compared with tower measured albedos, using pixel-to-point analysis, between 2012 to 2016. The tower measured point albedos are then upscaled to coarse-resolution albedos, based on atmospherically corrected BRFs from high-resolution Earth observation (HR-EO) data, alongside MODIS BRDF climatology from a larger area. Then a pixel-to-pixel comparison is performed between DHR and BHR retrieved from coarse-resolution satellite observations and DHR and BHR upscaled from accurate tower measurements. The experimental results are presented on exploring the parameter space associated with land cover type, heterogeneous vs. homogeneous and instantaneous vs. time composite retrievals of surface albedo. 
    more » « less
  5. Experiments are conducted to understand atmospheric spark ignition process in more detail. The research done relates the electrical energy dissipated across the spark gap to the measured schlieren ignition volume. The result is the supplied electrical thermal energy. The study provides insight into the structure of plasma and the mechanisms which convert electrical power into heat. The research is done to support laminar burning speed calculations to increase accuracy and extend diagnostic techniques to conditions otherwise immeasurable. Typically, plasma measurements are taken via a Langmuir probe. However, for the automotive ignition plasma, this measurement technique is challenging because of the transient nature, high pressure, and temperatures involved. Therefore, several alternative techniques will be used in order to find the potential distribution of the plasma and unveil the structure of the plasma more specifically the cathode fall. Three different voltage measurements are taken in order to capture the cathode fall of the plasma. One method simply measures the potential using a high voltage probe. This method may be inaccurate because of the presence of charged ions, however, these results are compared to non-intrusive measurements where voltage data is extrapolated over various gaps sizes to zero length. It is generally agreed that the desired measurement for this work, the cathode fall, remain constant and depends on the composition of the gas and the electrode. Therefore, changing the system input power and the gap will only change the voltage drop across the bulk plasma. The linear change in voltage potential through variation of testing parameters like gap length can then be extrapolated to zero length of the bulk plasma or minimum energy value which should be equal the value of cathode fall and bulk plasma potential respectively. It was found that after excluding systemic losses such as electrical resistance and ignition coil inefficiencies, the primary loss within the plasma gap is the potential drop across the cathode sheath. Excluding the loss in the cathode fall results in a measured electrical data that is responsible for thermal discharge. In order to highlight the findings, electrical discharge energy is compared to the volume of the heated gas kernel in atmospheric air. Removal of the cathode fall data will show that the energy is proportional to the volume of heated gas whereas, before the change in energy dissipation between glow and arc plasmas prevented this relationship from being visible. The data and methods discussed in this research provides the means to determine the thermal energy of ignitions and sparks even when the spark is inaccessible or obscured. Further work will be done utilizing the power measurement found in this work in a model to predict the affected thermal spark volume. It is also proposed that further validation of the proposed measured electrical thermal energy should be compared to the energy measured with a calorimeter to determine any other inefficiencies in the plasma discharge process. Additionally, the experimentation done observes the cathode fall of only glow plasma, Additional work should be done to find the cathode fall of arc plasma. 
    more » « less